Panduit D88RDEB Net-Verse 48RU Split-Hinged Rear Door — 800mm Wide, Black
Overview
The Panduit D88RDEB is a 48RU split-hinged rear door from the Panduit Net-Verse™ cabinet line, purpose-built for data center and server room enclosures where rear access has to stay practical without compromising containment. At 800mm wide and 2,253mm tall (88.71 inches), it matches the footprint of full-height 48RU open-frame racks and enclosed cabinets in the Net-Verse family. The split-hinge design is the key distinction here: instead of a single panel that sweeps a wide arc into the aisle, the door opens in two sections — a meaningful advantage in dense rows where rear aisle clearance is measured in inches, not feet.
The D88RDEB ships in black and is RoHS compliant, making it compatible with facilities operating under EU and domestic environmental procurement requirements. If you're adding a rear door to an existing Net-Verse deployment or specifying a replacement, this is the model to verify against your cabinet's width dimension — 800mm is the wider of the two common Net-Verse cabinet widths.
Key Features
- Split-Hinged Panel Construction: The door divides into two hinged sections rather than swinging as a single slab. In a hot-aisle/cold-aisle containment layout where rear aisles run 24–36 inches, a split door cuts the swing arc roughly in half — you're not rolling equipment out of the way just to access patch cabling at the rear.
- 48RU Height (88.71 in / 2,253.2 mm): Dimensioned for full-height 48U enclosures. Confirm your cabinet's usable RU count before ordering — a 42RU cabinet will leave an unmatched gap at the top or bottom.
- 800mm Width: The 800mm footprint matches the wider Net-Verse cabinet variants. The 2.6-inch (66mm) overall width of the door assembly itself is the swing-clearance figure to check against adjacent equipment or containment panels.
- Net-Verse™ Ecosystem Fit: Designed as a matched accessory within the Panduit Net-Verse product family. Using OEM doors rather than aftermarket panels preserves gasket alignment and airflow sealing at the cabinet perimeter — relevant if you're running hot-aisle containment where door-to-cabinet gaps bleed conditioned air.
- RoHS Compliant: Meets Restriction of Hazardous Substances requirements. Relevant for facilities with green procurement policies, government contracts specifying RoHS, or EU-destined equipment.
- Black Finish: Standard black coordinates with Net-Verse enclosures and the majority of installed rack equipment. No color-matching issues in mixed-vendor rows.
- Single-Unit Package: Ships as one door assembly (Package Qty: 1). Order quantity maps directly to cabinet count — no partial-kit confusion on the receiving dock.
Integration & Compatibility
The D88RDEB is engineered for the Panduit Net-Verse™ cabinet line. Before ordering, confirm two things: (1) your target cabinet is 48RU in height, and (2) the cabinet width is the 800mm variant — Net-Verse also offers 600mm-wide configurations that require a different door SKU. Mixing width variants will result in misaligned hinges and frame gaps that defeat containment. If you're building out a full rack accessories kit — including blanking panels, cable managers, and side panels — source these from the same Net-Verse accessory catalog to ensure consistent fitment.
For facilities running structured cabling upgrades alongside the cabinet build, pairing this door with Panduit's network cabling infrastructure products keeps the full stack within a single vendor's compliance and warranty envelope.
Frequently Asked Questions
Q: What cabinet width does the D88RDEB fit?
A: The D88RDEB is dimensioned for 800mm-wide Net-Verse cabinets. It will not correctly fit 600mm-wide Net-Verse variants — verify your cabinet's width specification before ordering.
Q: Is the D88RDEB a front door or rear door?
A: The D88RDEB is a rear access door for Net-Verse enclosures. The split-hinge design specifically addresses rear aisle clearance constraints common in dense data center rows.
Q: What does the split-hinge design mean in practice?
A: Instead of a single panel that requires a full-width swing arc to open, the door splits into two sections that each open independently. In tight rear aisles — typically 24 to 36 inches — this can make the difference between accessible and inaccessible rear cabling without moving adjacent equipment.
Q: Is the D88RDEB RoHS compliant?
A: Yes. The D88RDEB meets RoHS (Restriction of Hazardous Substances) requirements, per the manufacturer's listed standards.
Q: Does the D88RDEB come with mounting hardware?
A: Package quantity is listed as 1 unit (the door assembly). Specific included hardware is not itemized in the available product documentation — contact your procurement team or Panduit's product support to confirm fastener requirements for your cabinet revision.
Q: What is the overall height of the D88RDEB?
A: The door stands 88.71 inches (2,253.2 mm) tall, matching the full height of a 48RU Net-Verse enclosure.
The D88RDEB is one of those parts that sounds straightforward until you're standing in a dense data center row with 24 inches of rear aisle and a standard single-panel door that physically cannot open without rolling a ladder out of the way. The split-hinge on this door solves a real operational problem — the 800mm-wide panel breaks into two independently hinged sections, so technicians can access rear cabling and PDU connections without clearing the aisle first.
Technical Highlights:
- Full 48RU Height (88.71 in / 2,253.2 mm): Dimensioned to cover the full vertical span of a 48RU Net-Verse enclosure — no gap at top or bottom where hot exhaust can recirculate into the cold aisle intake.
- 800mm Cabinet Match: Net-Verse ships in 600mm and 800mm widths; the D88RDEB is the 800mm variant. An 800mm door on a 600mm cabinet won't seat — the hinge posts won't align, and no amount of persuasion changes that.
- RoHS Compliance: Documented standard for the SKU. Relevant for government and enterprise procurement specs that require it; doesn't require a separate compliance inquiry.
Deployment Considerations:
- Measure your rear aisle clearance before assuming a split door solves everything — each half still needs enough swing room to open past 90 degrees for full rear access. In containment corridors under 18 inches, even a split door may be restricted.
- The overall door assembly width is listed at 2.6 inches (66mm) — this is the door body depth, not the net-open clearance. Don't confuse it with aisle swing clearance when planning the row layout.
The D88RDEB makes the most sense in a 48RU Net-Verse deployment where rear aisle density is already a constraint — co-location facilities, high-density compute rows, and enterprise server rooms where a full-swing door would be a daily operational friction point rather than an occasional inconvenience.
