Panduit D62RDEW Net-Verse Split-Hinged Rack Cabinet Door
Overview
The Panduit D62RDEW is a split-hinged replacement door for Net-Verse™ 42RU cabinet enclosures with a 600mm width profile. Designed for structured cabling and network equipment installations where routine access to the rear of a rack is part of normal operations, the split-hinge design lets technicians open either the upper or lower half of the door independently — without swinging the full 78-inch panel into a tight aisle. This matters in dense data closets, server rooms, and telecom equipment rooms where full rear-door clearance is limited. Finished in white, it integrates with Net-Verse cabinets deployed in environments where light color coordination is specified. The D62RDEW ships as a single unit and carries RoHS compliance, making it appropriate for installations subject to hazardous-substance regulations across the EU and equivalent jurisdictions.
Explore the full Panduit cabinet and enclosure line for compatible frames, side panels, and thermal management accessories.
Key Features
- Split-Hinge Design, 42RU Height: The door divides at mid-frame, letting you open the upper half to access patch panels or cable management while leaving the lower half closed against active switching gear. In a live production rack, this reduces the risk of accidental contact with powered equipment during rear-access maintenance tasks.
- 600mm Width Profile: Sized to match the 600mm-wide Net-Verse cabinet footprint. Verify your cabinet's nominal width before ordering — a 600mm door will not fit a 750mm or 800mm frame. The overall installed width as measured is 2.6 inches (66mm) for the door panel itself, confirming a low-profile fit flush to the cabinet frame.
- 78.19-Inch (2,253mm) Overall Height: Covers the full 42RU usable height of the matching Net-Verse enclosure. No gap at top or bottom means dust ingress through the rear is minimized — relevant in raised-floor environments where underfloor air carries particulate.
- White Finish: Matches white Net-Verse cabinet deployments common in clean-room IT spaces, healthcare equipment rooms, and retail back-of-house installations where aesthetics or color-coding of infrastructure zones is specified. If your existing cabinet is black, verify your cabinet's color designation before ordering.
- RoHS Compliant: Meets the EU Restriction of Hazardous Substances directive. For multinational enterprises with EU site deployments or procurement policies that mandate RoHS compliance across all infrastructure components — including passive enclosure hardware — the D62RDEW satisfies that requirement without additional qualification work.
- Net-Verse™ Sub-Brand Fit: Part of Panduit's Net-Verse enclosure ecosystem, which means door hardware, hinges, and latch mechanisms are designed and toleranced to work with Net-Verse frames. Using out-of-family doors on Net-Verse cabinets can introduce alignment issues at the latch point; staying within the Net-Verse product family avoids that. Browse network cabinets and enclosures to find matching components.
- Single-Unit Package: Ships as one door assembly (Package Qty: 1). For a full rear-access configuration on a single rack, one unit covers the complete rear opening. For installations replacing doors on multiple cabinets, order one D62RDEW per cabinet.
Integration and Compatibility
The D62RDEW is engineered for Panduit Net-Verse cabinet enclosures in the 42RU, 600mm-wide configuration. Before specifying this door, confirm two things: (1) the host cabinet is a Net-Verse frame — Panduit's other enclosure families use different door mounting interfaces; (2) the cabinet width is 600mm, not 750mm or 800mm. The door mounts via the Net-Verse hinge system; no separate hinge hardware is listed in evidence as included, so verify with your cabinet's installation documentation whether hinge pins are integral to the frame or supplied with the door.
For installations requiring cable pass-through or brush strips at the door panel, check Panduit's Net-Verse accessory catalog — the D62RDEW door panel itself does not include brush-seal or cable-entry provisions based on available evidence. If airflow containment is a design requirement, pair this door with aisle containment accessories appropriate to the Net-Verse system.
The RoHS-compliant construction makes the D62RDEW compatible with procurement frameworks that extend substance restrictions to all rack infrastructure, not just active electronics. Confirm with your AHJ and procurement team whether the installation site's regulatory scope covers passive enclosure components.
Frequently Asked Questions
Q: Is the Panduit D62RDEW compatible with all Panduit cabinet enclosures?
A: No. The D62RDEW is designed specifically for Net-Verse™ cabinets in the 42RU, 600mm-wide configuration. Panduit produces multiple enclosure families with different door mounting systems. Verify your cabinet's series and nominal width (600mm, not 750mm or 800mm) before ordering.
Q: Does the D62RDEW include hinge hardware, a latch, or a lock?
A: Available evidence does not confirm which specific hardware is included in the box. Panduit's product page for the D62RDEW should be consulted, or contact pre-sales engineering to confirm what hinge and latch hardware ships with the unit before installation planning.
Q: What does the split-hinge design mean in practice?
A: The door is divided horizontally at roughly mid-rack, allowing the upper half or lower half to be opened independently. This is useful in tight aisles or live environments where opening a full 78-inch door is impractical or creates access hazards to adjacent equipment.
Q: Is the D62RDEW RoHS compliant?
A: Yes. The D62RDEW carries RoHS compliance per the manufacturer's product data, making it suitable for installations with EU hazardous-substance procurement requirements covering passive infrastructure components.
Q: Can I order the D62RDEW in black to match a black Net-Verse cabinet?
A: The D62RDEW is specified in white. If your Net-Verse cabinet is black, check Panduit's Net-Verse door accessory lineup for the equivalent black-finish part number — the D62RDEW is not the correct choice for a black cabinet installation.
The D62RDEW is a purpose-built component decision, not a generic purchase — the 600mm width spec is non-negotiable. I've seen installations held up when facilities teams ordered doors from the wrong width tier; a 600mm door on a 750mm frame leaves gaps at both hinge and latch points, and the latch simply won't engage. Confirm your Net-Verse frame's nominal width before this ships.
Technical Highlights:
- Split-Hinge Mechanism: Allows independent upper/lower access on a full 42RU (78.19-inch / 2,253mm) panel — operationally significant when rear-of-rack access is needed during production hours in a constrained aisle.
- 600mm Width Match: Toleranced for Net-Verse 600mm frames specifically. The door panel itself measures 2.6 inches (66mm) in profile depth — low-profile fit that does not extend meaningfully into rear aisle clearance.
- RoHS Compliance: Confirmed at the SKU level, which satisfies enterprise procurement checklist requirements for hazardous-substance restrictions across all infrastructure components, not just active electronics.
Deployment Considerations:
- Verify Net-Verse frame generation compatibility — Panduit has revised Net-Verse hardware interfaces across generations. Confirm the D62RDEW hinge pattern matches your specific cabinet model before installation day.
- White finish only: if your site uses black cabinets for hot-aisle/cold-aisle visual differentiation, the D62RDEW is the wrong part. Source the matching black-finish variant from the Net-Verse door lineup instead.
Best fit for healthcare IT rooms, clean-room network closets, or retail back-of-house installations running white Net-Verse 600mm racks where split-access during live operations is a routine maintenance requirement.
