Middle Atlantic 41SP 38DP BGR Side Panels - BSPN-41-38

Middle Atlantic BSPN-41-38 BGR Series 41U Side Panels

The Middle Atlantic BSPN-41-38 is a pair of side panels engineered specifically for the BGR open-frame rack series, covering a 41U enclosure at 38-inch depth. If you're building out a structured AV or security equipment rack and need to close off the sides for cable management, airflow control, or physical access restriction, these panels are the exact-fit solution — no trimming, no shimming, no field fabrication required. At 75.66 inches tall and 37.78 inches wide, they fill the full footprint of a 41U BGR rack without gaps or overhang. This is a B2B specialty product: the dimensional tolerances matter, and the BSPN-41-38 (often searched as BSPN 41 38) is spec'd to Middle Atlantic's own rack geometry.

Key Features

• 41U height coverage (75.66 in / 192.2 cm): spans the full vertical run of a 41U BGR rack — no partial-panel workarounds or stacking required. One panel covers one side, top to bottom.
• 38-inch depth match (96.5 cm): designed precisely for the 38-deep BGR frame. If your rack is a different depth (e.g. 26" or 32"), these panels will not align correctly — confirm your BGR depth before ordering.
• 37.78-inch panel width (96 cm): matches the external width of the 41U BGR frame. This isn't a generic cut-to-fit sheet; it's a dimensional match to the Middle Atlantic rack family, which means clean seams and consistent aesthetics in finished rack rooms.
• BGR series compatibility: the Base Series designation confirms these panels are part of the BGR product family. BGR racks are widely deployed in broadcast, AV integration, and security operations center builds — panels from this line maintain the rack's structural and aesthetic continuity.
• Package count: 1 panel per package: each unit ships as a single panel. If you need both sides covered, order two. This is worth confirming at the quote stage — assuming a pair and receiving one is a common sourcing mistake on panel orders.
• 76 lb shipping weight: steel construction means these panels are substantial. Factor the weight into shipping logistics and installation crew planning — a two-person install is practical for positioning and fastening at full height.

Integration and Compatibility

The BSPN-41-38 is a direct accessory for Middle Atlantic BGR series racks at 41U height and 38-inch depth. Before ordering, verify three things: (1) your rack is a BGR-series frame, not a different Middle Atlantic line such as the PFR or DTRK series; (2) your rack depth is 38 inches — BGR frames ship in multiple depths and the panel is not adjustable; (3) you have the correct rack unit count — BGR side panels are depth- and height-specific, and a 37U or 45U frame requires a different panel SKU.

These panels are commonly installed in server room and equipment rack deployments where open-frame racks need side enclosure for dust control, airflow channeling, or limited physical access restriction. They do not provide locking security on their own — for secured enclosures, pair with appropriate locking door accessories from the BGR line. For full rack planning in security operations or AV control room builds, consult a rack accessories configuration guide to confirm panel, door, and top/bottom cap compatibility before procurement.

Frequently Asked Questions

Q: Does the BSPN-41-38 fit BGR racks of all depths, or only 38-inch depth?

A: Only 38-inch depth. The panel is dimensioned at 38 inches (96.5 cm) specifically for the 38-deep BGR frame. Middle Atlantic BGR racks are available in multiple depths; using this panel on a shallower or deeper frame will result in misalignment. Confirm your rack depth before ordering.

Q: Does one order of BSPN-41-38 include both side panels, or just one?

A: One panel per package. Package Count is 1. If you need both sides enclosed, order two units.

Q: What rack unit height does the BSPN-41-38 cover?

A: The BSPN-41-38 is sized for a 41U rack, with a panel height of 75.66 inches (192.2 cm). It is not compatible with different U-heights in the BGR line — a 37U or 45U frame requires a different side panel SKU.

Q: Is the BSPN-41-38 compatible with Middle Atlantic BGR racks only, or does it fit other Middle Atlantic series?

A: The Base Series designation is BGR. These panels are engineered to the BGR frame geometry. Other Middle Atlantic rack series (such as PFR or DTRK) use different frame dimensions and are not confirmed compatible with this panel.

Q: What is the shipping weight of the BSPN-41-38, and are there any special freight considerations?

A: Shipping weight is 76 lbs (34.5 kg) per panel. At this weight and at 75.66 inches tall, plan for two-person handling during receiving and installation. Freight class and packaging should be confirmed with your carrier for large panel shipments.

Ted Perry

The BSPN-41-38 comes up regularly in SOC and AV control room builds where integrators are finishing out BGR open-frame racks. At 75.66 inches and 76 lbs per panel, this isn't a lightweight cosmetic cover — it's a structural enclosure component, and the 38-inch depth spec is the number that bites teams who don't verify their rack configuration before the order ships.

Technical Highlights:

• Exact depth fit — 38 in (96.5 cm): BGR racks ship in multiple depths; this panel is cut to 38 inches. A 32- or 26-inch BGR frame will leave a gap or require forcing — neither is acceptable in a finished rack room.
• Full 41U height (75.66 in / 192.2 cm): covers the entire vertical run of a 41U frame in a single panel. No stacking, no seam at mid-rack, no mismatch with the frame's top and bottom rails.
• 76 lb shipping weight per panel: steel construction at this size is heavy. Two-person installation is the practical minimum; factor this into your install crew scope when scheduling rack finishing work.

Deployment Considerations:

• Package Count is 1 — each BSPN-41-38 unit is a single panel. Full side enclosure of a rack requires two orders. This is a procurement detail worth confirming explicitly when requisitioning, especially on multi-rack deployments where the panel count doubles fast.
• These panels do not include locking hardware. If physical access control at the rack side is a requirement for your deployment, the BGR line includes door and locking accessories that should be specified alongside the panels — side panels alone will not satisfy a locked-rack security policy.

The BSPN-41-38 is the right spec for integrators closing out a 41U BGR rack at 38-inch depth in a security operations center, broadcast control room, or enterprise AV rack room where finished appearance and cable containment both matter. Verify your BGR depth and U-count before the PO goes out.