Zebra LD-R2LS5W 8000D Linerless Direct Thermal Label Roll — 36-Roll Carton
Overview
The Zebra LD-R2LS5W is a 36-roll carton of 8000D linerless direct thermal labels sized 2 inches wide by 65 feet long — a format built for mobile and desktop label printers handling high-volume, liner-free workflows. Because there's no backing paper to peel and discard, linerless media cuts waste by roughly 30–40% per roll compared to conventional die-cut stock and lets you print variable-length labels on demand, which matters when label content changes job to job. If your operation is dealing with liner disposal costs, liner jams in desktop applicators, or variable-length print requirements, LD-R2LS5W is the format to evaluate.
Key Features
- 2-Inch Label Width: The 2" format fits standard narrow-web linerless-capable printers without a media-width adjustment, making it a drop-in for most mobile desktop configurations. Narrower than 3" or 4" rolls, so it's right-sized for item-level pricing, food-rotation, and pharmacy dispensing labels where a wide footprint would be wasteful.
- 65-Foot Roll Length: At 65 feet per roll, you get meaningful label yield without the bulk of a large-core industrial roll. For counter-top retail or pharmacy printers, this roll length fits standard roll compartments and reduces changeover frequency during busy shifts.
- 0.75-Inch Core Size: The 0.75" core is matched to mobile and compact desktop linerless printers. Verify your printer's core specification before ordering — desktop industrial printers typically require a 1" or 3" core; mismatching here means the roll won't seat correctly on the spindle.
- 2.2-Inch Roll Diameter: The 2.2" outer diameter is compact enough to load into mobile printers with tight media compartments. If your printer specifies a maximum OD, cross-check against this value before purchasing in carton quantity.
- Direct Thermal Print Technology: No ribbon, no ink — the 8000D face stock responds directly to the printhead's heat. That eliminates ribbon inventory, ribbon-change downtime, and one of the most common printer consumables to run out during a shift. It also means fewer parts between you and a printed label.
- 3.0mil Face Stock Thickness: At 3.0 mil, this label stock handles normal surface contact, light moisture, and the physical handling typical of retail shelf-edge, food-service rotation, and short-dwell logistics labels. It's not a synthetic or waterproof stock — for extended outdoor exposure or high-moisture environments, a polypropylene or polyester face stock would be the correct choice instead.
- High-Tack Permanent Acrylic Adhesive: The high-tack acrylic formulation bonds aggressively on first contact, including on coated cardboard, rough corrugated, and some plastics where standard-tack adhesives fail to hold. Permanent means it's not designed for clean removal — don't spec this on assets or surfaces where you'll need to pull labels off later without residue.
- Linerless Format — No Backing Paper: Because linerless media uses a silicone-coated face and a plateless cutter in the printer instead of pre-die-cut gaps, you get continuous label stock. That means variable-length labels are possible within the printer's supported range, and you eliminate liner as a disposal stream — relevant if you're in a facility with recycling compliance requirements.
- 36 Rolls Per Carton: Carton quantity of 36 makes per-roll unit economics better at volume, and carton purchasing reduces reorder frequency. For a busy food-service counter running 2–3 rolls per day, a carton is roughly a 2-week supply.
Integration & Compatibility
The LD-R2LS5W (often searched as LD R2LS5W) is designed for Zebra 8000D linerless-capable printers. Linerless media requires a printer equipped with a linerless platen roller and a linerless cutter blade — not all direct thermal printers support linerless stock, even if the label width and core size physically fit. Confirm your printer model explicitly supports linerless media before stocking this consumable. Within the Zebra Zebra label printer and media catalog, the 8000D linerless series is documented for specific desktop and mobile models. If you're sourcing for a label printer fleet, match the media spec to the validated printer model list in the printer's media guide. For broader label-media planning — including how to match face stock to adhesive type and environment — the label media selection guide covers face stocks, adhesive grades, and core size compatibility in detail. If your application involves cold-chain or high-humidity environments, also review synthetic linerless alternatives in the direct thermal labels category — the 3.0mil paper face stock on this roll is not rated for prolonged moisture exposure.
Frequently Asked Questions
Q: What printer models is the LD-R2LS5W compatible with?
A: The LD-R2LS5W is designed for Zebra 8000D linerless-compatible printers. Linerless media requires a printer with a linerless platen roller and a dedicated linerless cutter — not all direct thermal printers support this format. Always confirm your specific printer model explicitly supports linerless media before purchasing in carton quantity.
Q: Can I use the LD-R2LS5W in a standard direct thermal printer that isn't linerless-capable?
A: No. Linerless media requires a silicone-coated platen roller to prevent the adhesive from sticking to the printer mechanism, and a plateless cutter to sever labels. Using linerless stock in a standard printer can jam the media path and damage the platen roller. Only load linerless media in printers specifically rated for it.
Q: Is the adhesive on the LD-R2LS5W removable or repositionable?
A: No. The LD-R2LS5W uses a high-tack permanent acrylic adhesive. It is designed for strong, durable bonding on first application and is not intended for clean removal. Do not use this label stock on surfaces or assets where you'll need to remove labels without leaving residue.
Q: How many labels will I get per roll, and how long is each label?
A: Because the LD-R2LS5W is a linerless continuous-format roll (65 feet per roll), label length is variable and determined by your printer's software configuration. There are no pre-die-cut gaps. The number of labels per roll depends entirely on the label length programmed at the printer.
Q: Is the LD-R2LS5W face stock waterproof or suitable for outdoor use?
A: No. The 8000D face stock is a 3.0mil direct thermal paper — not a synthetic or waterproof material. It handles light incidental moisture typical of indoor food-service or retail environments, but is not rated for sustained outdoor exposure, submersion, or high-humidity cold-storage applications. For those conditions, a polypropylene or polyester linerless face stock would be the correct specification.
Q: What is the core size, and does it fit mobile printers?
A: The LD-R2LS5W uses a 0.75-inch (3/4") core, which is the standard core size for mobile and compact desktop linerless printers. If you're using a full-size desktop or industrial printer, verify the printer's required core size — most industrial printers use a 1" or 3" core and will not properly accept a 0.75" roll.
I recommend the LD-R2LS5W specifically when the operation needs to eliminate liner disposal and cut label changeover time — the 65-foot continuous roll with no backing paper is the key spec here. Paired with the 0.75" core, this roll slots directly into mobile linerless printers without a core adapter, which matters when you're stocking consumables for a fleet of handheld print-and-apply devices on a retail floor or in a food-prep staging area.
Technical Highlights:
- High-Tack Permanent Acrylic Adhesive: Bonds aggressively on corrugated, coated board, and plastics where standard-tack stock fails — the right call for produce clamshell labeling or rough-surface logistics cartons where label lift-off causes downstream scan failures.
- 3.0mil Face Stock: Thick enough to handle normal handling and light moisture contact without tearing during application, but this is a paper stock — it will degrade in sustained wet or freezer environments. Know your dwell conditions before specifying at volume.
- 36 Rolls Per Carton: At 65 feet per roll, a carton gives you 2,340 linear feet of label stock. For an operation printing 2-inch labels at a fixed length — say, 1.5" for shelf-edge food-rotation tags — that's roughly 18,720 labels per carton. Plan reorder points around that yield rather than guessing.
Deployment Considerations:
- Confirm linerless-platen-roller compatibility before purchasing in bulk — the 0.75" core and 2" width will physically load into some non-linerless printers, but the adhesive will bond to an uncoated platen and cause a media jam within the first few inches of print.
- The permanent adhesive means no second chances on placement — once this label contacts the surface, it's there. For asset-tagging workflows where removal is expected, this is the wrong adhesive class; specify a removable-tack linerless variant instead.
The LD-R2LS5W is the right carton to stock for food-service rotation labeling, retail item-level price marking, and pharmacy dispensing counters where a linerless-capable desktop or mobile Zebra printer is already in place and liner waste is an operational or compliance concern.
