Middle Atlantic 35U/24INCHDEEP Configured RK - RCS-3524

Middle Atlantic RCS-3524 35U Pre-Configured Floor-Standing Rack

Overview

The Middle Atlantic RCS-3524 is a 35U, 24-inch-deep pre-configured floor-standing rack built for integrators who need a rack enclosure that ships ready to populate — no custom fab, no field modification. At 68.37 inches tall and rated to 1,200 lbs UL load capacity, it handles fully loaded NVR, server, and AV processor builds without flex or structural concern. TAA-compliant and manufactured in the USA, the RCS-3524 fits federal, state, and education procurement workflows where country-of-origin documentation is a hard requirement.

Key Features

• 35U of usable rack space (61.25 in usable height): Enough vertical real estate for a full surveillance head-end — NVRs, PoE switches, patch panels, and UPS — without stacking multiple enclosures or splitting equipment across rooms.
• 1,200 lb UL-rated load capacity: Supports even the heaviest enterprise storage arrays and multi-drive NVR chassis. The UL listing means this rating is independently verified, not a marketing figure.
• 24-inch depth (20.1 in usable): Accommodates deep rack-mount servers and storage units up to approximately 20 inches. Verify your deepest chassis against the 20.1 in usable depth — 1U devices with rear cable management can eat into that figure quickly.
• 138 CFM airflow rating: Designed to move enough air for thermally dense builds. Pair with Middle Atlantic's fan panels or blanking panels to direct airflow efficiently — the CFM rating assumes proper front-to-rear airflow management.
• 10-32 rack rail thread type: Standard 10-32 tapped rails work with the vast majority of rack-mount equipment cage nuts and rack screws. No adapters needed for standard enterprise hardware.
• Textured metallic gray powder coat finish: The textured surface resists scuffs and fingerprints better than smooth paint — relevant in high-traffic equipment rooms where aesthetics matter to facilities teams.
• TAA-compliant, USA-manufactured: Qualifies for GSA schedule purchases and federal agency deployments under Trade Agreements Act requirements. Country of origin is documented as USA for Federal Acquisition Regulation compliance.
• UPC 656747241499: Verified factory-new unit. Sourced direct from the manufacturer or US — no grey-market, no parallel imports.

Integration & Compatibility

The RCS-3524 uses standard 19-inch (48.3 cm) panel width and 10-32 threaded rails, making it compatible with virtually all rack-mount network video recorders, managed PoE switches, patch panels, and UPS units from major manufacturers. The 20.1-inch usable depth accommodates most 2U and 4U NVR chassis commonly deployed in mid-to-large surveillance installations. For integrators building out a complete head-end, pair this rack with structured cabling solutions and a managed PoE switch to keep the installation organized and serviceable. Not available for international shipping — domestic US deployments only.

Frequently Asked Questions

Q: Is the RCS-3524 TAA-compliant for federal procurement?

A: Yes. The RCS-3524 is TAA-compliant and manufactured in the USA, qualifying it for GSA schedule and federal agency purchases under Trade Agreements Act requirements.

Q: What is the maximum load capacity of the RCS-3524?

A: The RCS-3524 carries a UL-listed load capacity of 1,200 lbs (544.3 kg). This is an independently verified UL rating, not a self-reported figure.

Q: How many rack units does the RCS-3524 provide?

A: The RCS-3524 provides 35U of rack space, with 61.25 inches (155.6 cm) of usable height for equipment mounting.

Q: What rack rail thread type does the RCS-3524 use?

A: It uses standard 10-32 tapped rails, compatible with the vast majority of rack-mount enterprise equipment without adapters.

Q: What is the usable depth inside the RCS-3524?

A: Usable depth is 20.1 inches (51.1 cm). The total external depth is 24 inches. Verify your deepest chassis fits within 20.1 inches, accounting for rear cable management.

Q: Is the RCS-3524 available for international orders?

A: No. The RCS-3524 is not available for international shipping and is intended for domestic US deployments only.

Karl Wilson

The RCS-3524 (often searched as RCS 3524) is the rack I spec for mid-size surveillance head-ends where the integrator needs to load it heavy and leave it alone for years. That 1,200 lb UL-listed load rating is the spec that matters most — it means a fully loaded build with dual NVRs, a multi-port managed switch, patch panels, and a rack-mount UPS won't stress the structure, and the UL listing backs it up independently.

Technical Highlights:

• 35U / 61.25 in usable height: Enough vertical space to build a complete surveillance head-end — NVRs, switching, patch, and power — in a single enclosure rather than splitting across two racks and doubling your cable runs.
• 20.1 in usable depth: Fits most 2U–4U NVR and server chassis. At 20.1 inches, you have clearance for deep storage units, but this is the number to check against manufacturer chassis specs before ordering.
• 138 CFM airflow: Adequate for a dense build, but only if you manage airflow discipline — blanking panels in unused Us, fan panels at intake/exhaust. Without them, hot spots develop regardless of the CFM rating.

Deployment Considerations:

• At 173.4 lbs empty (204 lbs shipping weight), plan your floor load and get two people on the install. Route it through doorways before populating — 68.37 inches tall clears standard 80-inch door frames, but barely with casters.
• The 10-32 rail thread is standard, but always verify your specific NVR or server uses 10-32 cage nuts rather than M6 — mixing thread types is a field headache that wastes time on commissioning day.

This rack is the right call for a 20–30 camera enterprise surveillance installation where TAA compliance is a procurement requirement and the integrator is building a permanent, fully loaded head-end — not a temporary or small-site deployment where a 12U wall-mount would suffice.