Axis 02093-001 2N Verso/Solo 2-Pin I/O Terminal Block, 10-Pack
Overview
The Axis 02093-001 is a pack of 10 green 2-pin screw terminals designed specifically for the input/output connections on 2N IP Verso and 2N IP Solo intercom panels. If you're commissioning a door station installation and need replacement or additional I/O terminal blocks for relay outputs, door-release wiring, or auxiliary inputs, this is the part to order — not a generic terminal that may not seat correctly in the 2N housing.
Each pack contains 10 individual 2-pin terminals. Order multiples if you're outfitting a larger deployment with several Verso or Solo door stations, or stocking spares for a service contract.
Compatibility
The 02093-001 is designed for the Axis 2N intercom product line, specifically the 2N IP Verso and 2N IP Solo panels. These terminals mate with the I/O connector block positions on those units — used for dry-contact relay outputs (door strikes, mag-locks) and digital inputs (exit buttons, door sensors). Do not assume compatibility with other 2N models (IP Force, IP Safety, Helios) without confirming the terminal form factor matches; the 2N product line uses several different connector types across its access control intercom portfolio.
Installation Notes
These are standard screw-clamp terminals. Strip wire to the appropriate length before insertion, tighten the screw to the panel's specified torque, and verify continuity before closing up the door station housing. The green color coding matches the I/O block positions on Verso/Solo units, which helps during multi-wire installations. If you're integrating door release or monitoring dry contacts through a access control panel, confirm your wire gauge is compatible with the terminal's clamping range — the evidence does not specify a wire gauge range, so verify against the 2N IP Verso or Solo installation manual before ordering heavy-gauge cable.
What's in the Box
- 10x 2-pin green screw terminal blocks (I/O connector, 2N Verso/Solo compatible)
Frequently Asked Questions
Q: What is the 02093-001 used for?
A: The 02093-001 is a pack of 10 green 2-pin terminals for the input/output connections on 2N IP Verso and 2N IP Solo intercom door stations. They're used to wire relay outputs (door strikes, locks) and digital inputs (exit buttons, sensors) to the panel.
Q: How many terminal blocks come in one pack?
A: One pack of 02093-001 contains 10 individual 2-pin terminal blocks.
Q: Are these terminals compatible with 2N IP Force or 2N Helios intercoms?
A: Compatibility is confirmed only for the 2N IP Verso and 2N IP Solo. Other 2N panels may use different terminal form factors — verify against the specific panel's installation manual before ordering.
Q: Can I use generic 2-pin terminals instead of the 02093-001?
A: Physically similar terminals may fit, but the 02093-001 is the manufacturer-specified part for the Verso/Solo I/O block. Using non-specified terminals risks poor contact retention or housing fitment issues in a door station environment subject to vibration and repeated use.
The 02093-001 is one of those parts that never gets ordered until someone is standing at a door station with a stripped terminal and a job to finish. It's a pack of 10 green 2-pin screw terminal blocks — the manufacturer-specified I/O connectors for the 2N IP Verso and 2N IP Solo intercom platforms. Small part, big consequence if you're missing it mid-installation.
Technical Highlights:
- Pack quantity of 10: Enough to stock a multi-door deployment or keep spares on a service van for Verso/Solo sites without re-ordering per terminal.
- 2-pin I/O format: Matches the relay output and digital input positions on the Verso/Solo I/O block — one terminal per circuit, wired for door strikes, mag-locks, or exit button inputs.
- Manufacturer-specified part: These are the OEM terminal blocks for the Verso/Solo, meaning correct seating geometry and contact retention for the panel's connector housing — not a field-improvised substitute.
Deployment Considerations:
- Confirm the terminal count you need before ordering: each 2N IP Verso or Solo has a finite number of I/O positions, and each position takes one 2-pin terminal — plan your relay output and digital input count per door before sizing your order quantity.
- Compatibility is confirmed for 2N IP Verso and 2N IP Solo only; do not assume these terminals fit other 2N panel families without checking the installation manual for the target unit.
Best suited for integrators managing a fleet of 2N IP Verso/Solo door stations who need a reliable supply of the correct I/O terminals for commissioning or field service, rather than improvising with generic connector hardware on an access-controlled entry point.
