Middle Atlantic CM2-U2SC-GY 2A SC Connector Module, Unloaded

Overview

The CM2-U2SC-GY is an unloaded 2A-series connector module from Middle Atlantic, built to accept SC-type connectors for fiber pass-through in rack and enclosure applications. As an unloaded module, it ships as the carrier plate/frame only — you populate it with your own SC adapters or couplers to match the fiber count and polish type your run requires. This gives integrators control over exactly which connector hardware goes into the panel instead of being locked into a pre-loaded configuration. The CM2-U2SC-GY (often searched as CM2 U2SC GY) is TAA compliant, a relevant checkbox for government and federal-adjacent integration work where sourcing documentation gets reviewed during procurement.

Key Features

• Unloaded 2A module format: No pre-installed connectors — you select and load the SC adapters, so the module fits whatever simplex or duplex SC configuration your fiber plant actually uses instead of forcing a fixed count.
• SC connector compatibility: Built for SC-type fiber connectors, a common form factor in commercial and enterprise fiber runs, so it slots into existing SC-terminated infrastructure without an adapter mismatch.
• TAA compliant: Meets Trade Agreements Act sourcing requirements, which matters if this module is going into a government, education, or federal-contractor project where TAA status gets checked during procurement review.
• 2A series carrier design: Matches the 2A module footprint used across compatible Middle Atlantic connector panels, so it mounts into the same panel cutouts as other 2A-series modules for mixed connector layouts on one plate.

Integration & Compatibility

Because this is an unloaded carrier, plan your fiber loadout before ordering: confirm the SC adapter style (simplex vs. duplex, and polish type such as UPC or APC) you intend to install, since the module itself only provides the SC-format opening and mounting frame. It's designed to integrate into rack enclosures alongside other 2A-series modules from the Middle Atlantic catalog, letting you build a mixed connector panel (power, data, fiber) in a single opening. For projects planning out fiber runs and connector counts across a rack elevation, a structured cabling and PoE planning guide is a useful reference before finalizing module selection. Pair it with compatible cable management accessories to keep fiber bend radius in check once the module is loaded and terminated.

Frequently Asked Questions

Q: Does the CM2-U2SC-GY come with SC connectors installed?

A: No. The CM2-U2SC-GY is an unloaded module — it's the SC-format carrier/frame only. You supply and install your own SC adapters or couplers to match your required fiber count and polish type.

Q: Is the CM2-U2SC-GY TAA compliant?

A: Yes, the CM2-U2SC-GY is TAA compliant, which supports use in government and federal-contractor procurement where Trade Agreements Act sourcing is a requirement.

Q: What connector type does the CM2-U2SC-GY support?

A: It's built for SC-type fiber connectors.

Q: What module series is the CM2-U2SC-GY part of?

A: It's a 2A-series module, matching the mounting footprint of other 2A connector modules in the Middle Atlantic lineup.

Marty Allison

The CM2-U2SC-GY is one of those parts that's easy to order wrong if you're not paying attention to the word "unloaded." This is the SC-format carrier plate for Middle Atlantic's 2A module series — it does not ship with SC adapters installed.

Technical Highlights:

• Unloaded SC carrier: You control exactly which SC adapter hardware goes in, rather than being stuck with a fixed simplex or duplex count from the factory.
• 2A module footprint: Drops into the same panel cutout as other 2A-series modules, so you can mix fiber, data, and power modules on one connector plate.
• TAA compliant: Clears sourcing review on government and federal-contractor jobs where that documentation gets checked.

Deployment Considerations:

• Confirm your SC adapter style (simplex/duplex, UPC/APC polish) before the job — the module itself won't tell you what to buy for the fiber side.
• Because it's unloaded, don't spec this alone on a BOM and expect a working fiber pass-through out of the box — budget for the SC adapter hardware separately.

Right fit for a rack build where you're standardizing on Middle Atlantic's 2A connector panel system and need a dedicated SC fiber pass-through position without being locked into a pre-set adapter count.