2N 01295-001 IP Verso 3-Module Backplate
The 2N 01295-001 is a specialized mounting backplate engineered to extend installation flexibility for the 2N IP Verso intercom platform. This accessory solves a recurring integration challenge: securing multi-module intercom configurations on surfaces where traditional mounting won't work—particularly glass partitions and textured or irregular wall surfaces that are common in modern building designs.
Key Features
- 3-Module Capacity: Accommodates up to 3 modules in a single backplate assembly, allowing you to configure a system tailored to your communication and access control needs without deploying separate installations or jury-rigging workarounds.
- Glass Surface Support: Engineered specifically for reliable, permanent mounting on glass—a material that rejects conventional fasteners and requires special hardware to avoid damage or stress failure.
- Uneven Surface Accommodation: Handles textured, curved, or non-standard wall geometry without requiring surface preparation or shimming, reducing installation labor and the risk of misalignment.
- IP Verso System Integration: Designed to pair directly with 2N IP Verso modules, maintaining mechanical and electrical compatibility without adapters or custom brackets.
- Professional Aesthetic: Delivers a clean, integrated appearance that blends with contemporary office, hospitality, and healthcare interiors instead of looking like a retrofit.
- Structural Foundation: Provides the mounting frame that allows 3 intercom or access-control modules to function as a cohesive unit, distributing load and ensuring stability under repeated user interaction.
Integration & Compatibility
The 01295-001 backplate is purpose-built for the 2N IP Verso intercom platform. It pairs with standard 2N IP Verso modules—such as audio stations, video handsets, call buttons, or reader modules—to create multi-function access and communication points. Installation requires mechanical mounting hardware appropriate to your wall material (glass clips, anchors for drywall, or structural fasteners for concrete); confirm your mounting substrate and hardware requirements with your integrator before procurement.
Deployment contexts include corporate office lobbies with glass partition walls, hospitality properties with modern architectural features, healthcare facilities requiring hygienic, cleanable intercom surfaces, and educational campuses with contemporary building design. The backplate is equally suited to recessed or surface-mount installation, depending on your wall depth and aesthetic preference.
For detailed integration guidance and module compatibility matrices, consult the intercom and access control documentation for your specific 2N IP Verso configuration.
Frequently Asked Questions
Q: Does the 01295-001 backplate work with older 2N IP Verso models?
A: The 01295-001 is designed for IP Verso intercom systems. Confirm your system generation with your integrator or 2N technical support before ordering.
Q: What mounting hardware is included?
A: The backplate itself is supplied without fasteners. Your integrator will specify the correct hardware (glass clips, wall anchors, or structural bolts) based on your installation surface and load requirements.
Q: Can I mount the backplate horizontally or at an angle?
A: The backplate is designed for vertical wall mounting. Non-standard orientations may affect drainage, cable routing, and module alignment; consult your system designer.
Q: Is the backplate weather-sealed for outdoor use?
A: The 01295-001 is designed for indoor installation. For outdoor deployments, consult 2N's weatherproof housing options or contact your integrator for environmental enclosure guidance.
Q: What is the maximum module weight the backplate will support?
A: Load capacity depends on your mounting surface and fastener type. Refer to the installation documentation or your integrator for weight limits and surface-preparation requirements.
Q: Does the backplate require power or network connections?
A: The 01295-001 is a passive mounting accessory. Power and network connections are managed by the modules you install; the backplate provides structural support only.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The 2N 01295-001 backplate solves a real problem in modern intercom deployments: glass walls and irregular surfaces reject standard fasteners. If you're integrating a multi-module 2N IP Verso system into a contemporary office or hospitality setting with significant glass architectural elements, the 01295-001 is worth the upfront cost—it eliminates field improvisation and delivers a professional finish that won't raise eyebrows during final walk-through.
Technical Highlights:
- 3-Module Capacity: You're not buying a single-function wall plate; this backplate accepts up to 3 modules, which means one installation handles audio, video, call buttons, and reader integration in a single footprint. That's labor savings and aesthetic coherence in one assembly.
- Glass and Uneven Surface Engineering: The backplate is designed specifically for these surfaces, not as an afterthought. That means the mounting points and structural load paths anticipate glass fastening (which requires different hardware) and non-planar walls, reducing field adjustments and callbacks.
- IP Verso Ecosystem Lock-In: This is a 2N-native accessory, not a generic bracket. Mechanical and electrical interfaces align perfectly with the modules you're deploying, which cuts integration risk.
Deployment Considerations:
- Fastener Responsibility: The backplate is the mounting frame; you (or your integrator) must source and install the correct hardware for your surface type. Glass requires clips; drywall needs anchors; concrete needs structural fasteners. Spec this upfront or you'll have a backplate and no way to mount it.
- Indoor Only: This is not weatherproofed. If your deployment spans an outdoor or semi-outdoor space, you'll need 2N's weatherproof enclosure instead. Don't try to retrofit this backplate into a covered exterior wall without confirming drainage and UV exposure limits.
Best fit: corporate office receptions with glass partition walls, hotel concierge desks with contemporary finishes, and healthcare facilities where you need multi-function access and intercom points on surfaces that won't accept traditional drywall anchors. If you're deploying to a standard drywall-only environment, a basic single-module mounting bracket may be overkill—confirm with your integrator.
