2N 01269-001 IP Verso 15ft Extension Cable
Overview
The 2N 01269-001 is a 5-meter (approximately 15 ft) extension cable designed to connect modules within the 2N IP Verso modular intercom system. This cable solves the common deployment problem of distance between the main unit and keypads, door readers, or I/O modules—allowing you to position components flexibly without signal degradation. Use it when your installation layout requires readers or keypads at greater reach from the base assembly, or when stacking multiple two- or three-module boxes across a building facade.
Compatibility
The 01269-001 works exclusively with 2N IP Verso modules and the plug-and-play interconnect architecture described in the 2N IP Verso installation manual (v.2.17). It is used to extend connections between the base unit and secondary modules—including keypad modules for code-lock operation, door readers, tamper switches, and I/O modules. Confirm your specific module configuration against the manual's "Extending Module Connection" section before ordering.
Installation Notes
The cable supports both indoor and outdoor installation environments. Refer to the 2N IP Verso installation manual for proper routing, strain relief, and overvoltage protection guidelines when running the extension cable through multi-floor or exterior applications. No additional power supply or converters are required—the cable carries both signal and power through the modular connection protocol.
What's in the Box
- 1x 5-meter (15 ft) extension cable assembly
