Altronix 24VAC/28A 28VAC/24A 8FUSE 220 - ALTV248600220
Multi-output power distribution module designed to provide regulated 24VAC or 28VAC to multiple surveillance or access control devices
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Questions about this product? Free pre-sales support from a senior specialist — product questions, compatibility checks, BOM quotes, price confirmation — typically answered within one business day. Need camera placement or system design work? Engineering time is $175 per hour (qty 1 = 1 hour). Hardware buyers get up to one hour ($175) credited back on their order.
The Altronix T2428175220 is a hardwired AC power supply transformer designed for international and industrial security installations running on 230–240VAC, 50/60 Hz mains. It delivers selectable output at either 24VAC (7.5A, 175VA) or 28VAC (6.25A, 185VA), making it a practical single-SKU solution for facilities that mix PTZ cameras, access control panels, and video intercoms on the same power run. If you're sourcing a power supply for a European or international site, or a domestic facility with 220V service, the T2428175220 covers both use cases without requiring an additional step-down transformer.
Altronix has built its reputation around Altronix power distribution and access control power products engineered for security integrators, and the T2428175220 follows that same design philosophy — straightforward wiring, a wide operating temperature window, and output ratings that match real-world PTZ and access control loads.
The T2428175220 is intended for integration with access control systems, PTZ camera pan/tilt heads, video intercoms, and other security devices that require class-2 AC power at 24VAC or 28VAC. It is not a DC supply and is not suitable for PoE infrastructure — pair it with a dedicated PoE switch for IP camera runs. When deploying alongside access control hardware, verify your lock and reader aggregate draw against the 7.5A (24VAC) or 6.25A (28VAC) output ceiling. For multi-door deployments where total power demand exceeds this rating, Altronix offers higher-capacity units in the same transformer family. Consult the relevant surveillance and access control planning guide to map power zones before specifying transformer count per floor or zone.
The storage temperature range of -20°C to 70°C is relevant if the unit will be warehoused in an unheated facility before installation — no special climate-controlled storage is required.
Q: What input voltage does the T2428175220 require?
A: The T2428175220 is designed for 230–240VAC input at 50 or 60 Hz, drawing 0.8A from the mains. It is not suitable for 120VAC North American residential service without a step-up transformer — it is intended for international and industrial 220V circuits.
Q: Can I use the T2428175220 for both 24VAC and 28VAC devices at the same time?
A: No. The output is selectable — either 24VAC at 7.5A or 28VAC at 6.25A — not simultaneous. Select the tap that matches your device requirements before wiring. Mixing voltages on a single tap is not supported.
Q: What is the continuous load limit I should plan for?
A: Industry best practice for transformer sizing is 80% of nameplate. At 24VAC, that's approximately 140VA continuous; at 28VAC, approximately 148VA. Avoid running at full 175VA or 185VA nameplate for extended periods to preserve transformer life and reduce thermal output.
Q: Is the T2428175220 rated for outdoor or unheated enclosure use?
A: The operating temperature range is -40°C to 60°C, which covers most unheated indoor utility rooms and enclosures in cold climates. If the unit will be installed in a true outdoor enclosure exposed to weather, ensure the enclosure itself provides the appropriate IP/NEMA environmental protection — the transformer's temperature range is not a substitute for enclosure weatherproofing.
Q: How much heat does the T2428175220 generate in an enclosure?
A: The rated heat output is 90 BTU/Hr (approximately 26W continuous). When mounting inside a shared cabinet, add this figure to the heat load of all other equipment to determine whether passive venting or active cooling is required.
Q: What is the shipping weight and does it ship with mounting hardware?
A: The product weighs 7.3 lb. (3.31 kg) and ships at 8.05 lb. (3.65 kg). Package contents beyond the transformer unit are not confirmed in available evidence — contact the seller prior to ordering if specific mounting hardware is required for your enclosure.

The T2428175220 is the unit I specify when a project calls for 220V-input AC power in an access control or PTZ deployment — specifically because the selectable 24VAC/28VAC tap means I can match the exact voltage spec on the lock hardware or pan/tilt head without sourcing a second transformer. At 7.5A on the 24VAC tap and 6.25A on the 28VAC tap, the output headroom is real, not marginal.
Technical Highlights:
Deployment Considerations:
The T2428175220 is the right call for international site deployments — EU-standard facilities, multi-tenant commercial buildings running 230V infrastructure, or domestic industrial sites with dedicated 220V service — where you need reliable dual-voltage AC output in a single compact unit without building a custom power rail.
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Looking for more Altronix products? Shop the full Altronix catalog →
Support services and planning resources for commercial surveillance, access control, and infrastructure deployments.
Fixed scope • Fixed price