Panduit UVD240 SteadySine 240V Replacement VRLA Battery Cartridge
Overview
The Panduit UVD240 is a factory-new replacement VRLA battery cartridge set designed specifically for the Panduit SteadySine UVP240 uninterruptible power supply. When your UPS runtime degrades — the inevitable result of battery aging in any sealed lead-acid design — the UVD240 is the direct-fit, OEM-sourced replacement that restores the UVP240 to original runtime performance without replacing the entire UPS chassis. For data closets, security equipment rooms, and edge-infrastructure deployments running on Panduit SteadySine power protection, this is the correct service part.
Battery replacement rather than full UPS replacement is the operationally sound decision: the power conditioning circuitry, transfer switch, and inverter in the UVP240 typically outlast several battery cycles. Stocking the UVD240 as a spare — or ordering it when runtime testing flags degradation — keeps your protected load online without the cost and downtime of a full unit swap.
Key Features
- Direct Compatibility with UVP240: The UVD240 is specified by Panduit exclusively for use with the UVP240 SteadySine UPS. There is no guesswork in fitment — this is the replacement cartridge set for that chassis, and no adapter or modification is required.
- VRLA (Valve-Regulated Lead-Acid) Chemistry: Sealed, maintenance-free construction means no electrolyte topping, no venting requirements beyond standard equipment room ventilation, and no spill risk during handling or installation. VRLA batteries are the industry standard for UPS applications precisely because they can be installed and forgotten until end-of-service life.
- SteadySine Sub-Brand Alignment: The UVD240 carries the SteadySine designation, matching the UVP240 platform. This matters because UPS battery cartridges are platform-specific — a battery cartridge from a different Panduit sub-brand or third-party source may not seat correctly, may not communicate state-of-health data to the UPS management interface, and may void the UPS warranty.
- Compact Form Factor — 4.47 in H × 13.07 in W: At 113.6 mm tall and 332.4 mm wide, the UVD240 cartridge set is sized to slide into the UVP240 battery bay without tools beyond what the UPS installation guide specifies. The slim profile (4.47 in height) is consistent with a 2U or 3U rack-mounted UPS form factor, which is standard for the SteadySine line.
- Single-Package Servicing: Supplied as one complete cartridge set (Package Qty: 1), the UVD240 replaces the full battery complement in a single service action. No partial replacement, no mismatched battery ages within the string — best practice for VRLA UPS servicing is to replace all cells simultaneously, and this cartridge enforces that.
- Factory-New Condition: Sourced factory-new — not refurbished, not reconditioned. A battery cartridge that has sat in a secondary market chain may already have partial self-discharge cycles logged against it before installation. Factory-new UVD240 units start with a full initial charge cycle from a known baseline.
Integration & Compatibility
The UVD240 is engineered for the Panduit SteadySine UPS line, specifically the UVP240. Before ordering, confirm your UPS model number against the UVP240 designation — Panduit produces multiple UPS families and battery cartridges are not cross-compatible between platforms. If you are managing a mixed fleet of UPS and power protection equipment, consult the UVP240 installation guide for the recommended battery replacement interval and the correct disposal procedure for the removed VRLA cartridge (sealed lead-acid batteries are regulated waste in most jurisdictions).
For infrastructure planning purposes, a UPS battery runtime and replacement guide can help you calculate when to schedule replacement based on load profile and ambient temperature — both of which accelerate VRLA aging. Pairing this cartridge with a structured power distribution strategy for your security or IT closet ensures the UVP240 and its replacement battery are sized appropriately for the connected load.
Frequently Asked Questions
Q: What UPS model is the UVD240 compatible with?
A: The UVD240 is specified for use with the Panduit UVP240 SteadySine uninterruptible power supply. It is not listed as compatible with other Panduit UPS models or third-party UPS chassis.
Q: Is the UVD240 a sealed, maintenance-free battery?
A: Yes. The UVD240 uses VRLA (valve-regulated lead-acid) technology, which is sealed and maintenance-free — no electrolyte checks, no water topping, and no special ventilation requirements beyond standard equipment room conditions.
Q: How many battery cartridge sets are included per order?
A: One complete battery cartridge set is included per package (Package Qty: 1). This set replaces the full battery complement in the UVP240 in a single service action.
Q: What are the physical dimensions of the UVD240?
A: The UVD240 measures 4.47 inches (113.6 mm) in height and 13.07 inches (332.4 mm) in width, sized to fit the UVP240 battery bay.
Q: Can I use a third-party battery cartridge instead of the UVD240 in my UVP240?
A: Third-party cartridges are not specified by Panduit for the UVP240 and may not seat correctly, may not communicate battery health data to the UPS management interface, and may affect the UPS warranty. The UVD240 is the OEM-designated replacement for the UVP240 platform.
Q: Is the UVD240 shipped factory-new?
A: Yes. The UVD240 is supplied factory-new — not refurbished or reconditioned — ensuring a full initial charge cycle from a known baseline.
The UVD240 is the replacement battery cartridge set for the Panduit SteadySine UVP240 — and the key spec that matters here is the physical envelope: 4.47 in H × 13.07 in W (113.6 mm × 332.4 mm). That form factor is non-negotiable. If you are sourcing a replacement battery for a UVP240 in a loaded rack, the last thing you want is a fitment issue during a service window. The UVD240 is the OEM-specified part, so the bay dimensions are a known match.
Technical Highlights:
- VRLA Sealed Construction: Valve-regulated lead-acid chemistry means no maintenance schedule, no electrolyte service, and no special venting beyond what a standard equipment room already provides — critical when these units are installed in locked IDF/MDF closets with infrequent access.
- Platform-Specific Fit: The UVD240 is explicitly listed for the UVP240 only. That specificity is a feature — it means Panduit has validated the electrical and mechanical interface, including any battery health telemetry the UVP240 reads from the cartridge.
- Single Cartridge Set Replacement: One order (Package Qty: 1) covers the complete battery replacement in the UVP240. Replacing the full string at once — rather than mixing old and new cells — is the correct practice for VRLA UPS servicing and maximizes post-replacement runtime.
Deployment Considerations:
- Confirm the installed UPS is the UVP240 before ordering — the model number is on the front bezel or rear label. Panduit's SteadySine line includes multiple variants with different battery cartridges; cross-ordering is easy and non-refundable on a used battery.
- VRLA batteries are regulated waste (sealed lead-acid) in most US jurisdictions. Plan for a compliant disposal path for the removed cartridge before the service window — do not leave this as an afterthought on a scheduled maintenance call.
The UVD240 is the right stock item for any facility running UVP240 units as primary power protection for security panels, NVR closets, or access control infrastructure — order one per UVP240 as a shelf spare and swap on first runtime degradation rather than waiting for a failure event.
