CyberPower 4 X 12V/9Ah Batteries, 18-month wty
UPS Replacement Battery Cartridge with four 12V/9Ah sealed lead-acid batteries
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Questions about this product? Free pre-sales support from a senior specialist — product questions, compatibility checks, BOM quotes, price confirmation — typically answered within one business day. Need camera placement or system design work? Engineering time is $175 per hour (qty 1 = 1 hour). Hardware buyers get up to one hour ($175) credited back on their order.
The CyberPower RB1290X2C is a matched pair of 12-volt, 9-amp-hour sealed lead-acid batteries designed as backup power modules for CyberPower UPS systems in surveillance, access control, and network infrastructure deployments. Each battery delivers 108 watt-hours of capacity — meaning a two-battery pack provides 216 total watt-hours of emergency runtime when your primary mains supply fails. This is the kind of component you install once and trust to sit idle until the moment you need it.
The RB1290X2C batteries are OEM components for CyberPower UPS models — verify your specific UPS chassis and battery terminal connectors before ordering. They are standard 12V/9AH sealed lead-acid cells, so they may be compatible with other UPS brands that use the same battery form factor and terminal type (fork or threaded connectors), but CyberPower does not guarantee third-party compatibility. Check your UPS manual for the exact battery specification before purchase. Installation typically requires removing the old battery pair and inserting the new pair into the UPS enclosure — no external charging equipment or special tools are needed, though you should have the UPS powered off and unplugged during the swap.
The RB1290X2C ships as a matched pair of sealed lead-acid batteries ready to install into your CyberPower UPS. No cables, connectors, or mounting hardware are included — these batteries slide directly into the battery bay of compatible UPS models.
Q: How long will the RB1290X2C batteries keep my NVR running during a power outage?
A: Runtime depends on your NVR's power draw. A typical 8-channel NVR with modest storage and network load draws 60–100W; 216 watt-hours would provide roughly 2–3 hours of runtime. High-power systems (16+ channels, heavy processing) may run 45–90 minutes. Test your specific hardware in your UPS to get real numbers.
Q: Can I use the RB1290X2C batteries in a non-CyberPower UPS?
A: Only if the other UPS model uses identical 12V/9AH sealed lead-acid batteries with compatible terminals. Check your UPS datasheet for the exact battery specification. Many brands use the same form factor, but terminal type and voltage matching are critical — do not assume compatibility without verification.
Q: What is the warranty on the RB1290X2C?
A: CyberPower provides an 18-month limited manufacturer warranty covering defects in materials and workmanship. This does not cover battery discharge due to age, normal wear, or improper storage temperature.
Q: Do these batteries require maintenance after installation?
A: No. Sealed lead-acid batteries require no water refilling or terminal maintenance under normal conditions. Simply install them in your UPS and let them charge and discharge as the UPS manages them.
Q: How often should I replace the RB1290X2C batteries?
A: Plan for replacement every 3–5 years depending on cycle frequency and ambient temperature. If your system experiences frequent power interruptions (more than a few per month), battery lifespan will shorten. Hotter environments also degrade lead-acid cells faster.
Q: What are the shipping dimensions and weight?
A: The RB1290X2C ships in a 10.0 × 3.25 × 12.0 inch box weighing 11 pounds total (both batteries). This fits standard parcel carriers and small enough to handle during delivery without special equipment.

I spec the RB1290X2C into surveillance and access-control deployments where runtime margin matters more than peak power delivery. A single pair gives you 216 watt-hours — enough to keep a typical network recorder or door-control processor alive long enough to shut down gracefully or hand off to a generator. The sealed lead-acid chemistry is bulletproof in equipment rooms where maintenance staff might forget about flooded-cell water levels.
Technical Highlights:
Deployment Considerations:
For a surveillance facility running dual NVRs on a single UPS, the RB1290X2C pair is the right choice if you want 30+ minutes of graceful shutdown or generator handoff. Don't count on it for extended blackouts — bring a genset if you need 4+ hours of continuous recording.
Manufacturer-verified compatible cameras, recorders, mounts, accessories, and licenses for this product. Adjust quantities and add the entire bundle to your cart in one click.
Looking for more CyberPower products? Shop the full CyberPower catalog →
Support services and planning resources for commercial surveillance, access control, and infrastructure deployments.
Fixed scope • Fixed price