Vertiv 1WEGXT4-700120 1-Year Extended Warranty for Liebert GXT4 700VA 120V UPS
Overview
The Vertiv 1WEGXT4-700120 is a one-year extended warranty contract covering parts and labor for the Liebert GXT4 700VA 120V rack/tower UPS. When a critical UPS protects servers, networking gear, or security infrastructure, letting the manufacturer's warranty expire without coverage in place is a straightforward risk management failure — this contract closes that gap for another full year. Coverage includes both component replacement and labor, so a failed battery module, inverter board, or control board doesn't turn into an unbudgeted repair call.
One important operational constraint to note upfront: the 1WEGXT4-700120 (often searched as 1WEGXT4 700120) must be purchased at the same time as the GXT4-700RT120 UPS unit and prior to shipment. Post-purchase enrollment is not supported under the terms of this contract, so procurement teams need to include it on the same purchase order as the hardware.
Key Features
- 1-Year Parts and Labor Coverage: The full contract period runs 12 months from the expiration of the standard manufacturer warranty. Both parts replacement and on-site or depot labor are included — meaning a failed component doesn't generate a separate service invoice. For a UPS protecting always-on infrastructure, this eliminates the variable cost exposure of out-of-warranty repairs.
- Unit Replacement Provision: Vertiv will replace the GXT4-700RT120 unit outright at any point during the extension period, subject to the same conditions as the standard warranty. This is more valuable than a repair-only contract in scenarios where a UPS failure during a power event causes secondary damage or where turnaround time on depot repair is unacceptable.
- Parts Replacement Included: Component-level parts replacement resolves problems without requiring a full unit swap when the failure is isolated — faster resolution for field-serviceable faults and lower logistics overhead compared to whole-unit return programs.
- Designed Specifically for the GXT4-700RT120: Coverage terms, labor rates, and replacement provisions are scoped to the Liebert GXT4 700VA 120V platform. There is no ambiguity about what hardware is covered — serial numbers are required at enrollment, tying the contract to a specific unit rather than a product family.
- Serial Number Registration Requirement: Each contract is bound to the registered serial number of the covered unit. This is standard practice for UPS service contracts and ensures claims are processed against the correct asset — important in multi-UPS environments where tracking which unit carries which coverage level matters for asset management.
- Protects Post-Manufacturer-Warranty Period: The GXT4 carries a standard manufacturer warranty from date of purchase. This extension activates at the point that coverage lapses, providing continuity of protection without a gap period during which an uncovered failure would be an out-of-pocket expense.
Integration and Compatibility
The 1WEGXT4-700120 is purpose-built for the Vertiv Liebert GXT4 700VA 120V UPS (model GXT4-700RT120) only. It does not apply to other GXT4 VA ratings, other voltage variants, or other Liebert UPS product lines. Buyers managing mixed fleets of uninterruptible power supplies should confirm the exact model number on each unit before ordering service contracts — the 700VA/120V designation is specific. For facilities with power protection requirements across multiple UPS platforms, separate SKU-specific contracts are required for each model.
The purchase timing restriction is operationally significant for project-based deployments: if a GXT4-700RT120 is being procured for a new server room build-out, data center refresh, or network infrastructure expansion, the warranty extension must be included on the initial hardware PO. Facilities managers and procurement teams should flag this as a line-item requirement during the budgeting phase rather than attempting to add coverage after the hardware ships.
Frequently Asked Questions
Q: Which specific UPS model does the 1WEGXT4-700120 cover?
A: The 1WEGXT4-700120 covers the Vertiv Liebert GXT4 700VA 120V UPS (GXT4-700RT120) only. It does not apply to other VA ratings or voltage variants in the GXT4 family.
Q: When must this warranty extension be purchased?
A: The extension must be purchased at the same time as the GXT4-700RT120 UPS and prior to shipment. It cannot be added after the hardware has been purchased or shipped.
Q: What does parts and labor coverage include?
A: Coverage includes both component parts replacement and labor for the full one-year contract period. Vertiv will also replace the unit outright if necessary, subject to the same conditions as the standard warranty.
Q: Are serial numbers required to activate the contract?
A: Yes. Serial numbers for the covered GXT4-700RT120 unit are required. The contract is tied to a specific unit, not a product category, so the serial number must be provided at the time of purchase.
Q: Does this contract overlap with the standard manufacturer warranty?
A: No. The 1WEGXT4-700120 is an extension that activates after the standard manufacturer warranty expires, providing one additional year of parts and labor coverage without a gap period.
Q: Can this warranty extension be transferred to a new owner if the UPS is resold?
A: Evidence available does not specify transferability terms. Contact Vertiv directly to confirm whether the contract follows the unit or the original purchaser.
The 1WEGXT4-700120 is one of those line items that's easy to skip at PO time and regret twelve months later. The Liebert GXT4 700VA 120V is a workhorse for edge rack deployments — small server closets, network IDFs, security head-end rooms — and the standard warranty window closes faster than most refresh cycles. This contract extends that window by a full year with parts and labor, meaning a failed component on a unit that's still well within its useful service life doesn't become a budget discussion.
Technical Highlights:
- Full 1-Year Extension: The contract runs for 12 months from the point the standard warranty lapses — no gap period, no coverage cliff. For a 700VA UPS deployed in a security head-end or edge IDF, that continuity matters more than the dollar cost of the contract itself.
- Parts and Labor Both Covered: Many service contracts cover parts or labor, not both. This one covers both, which means a board-level failure or a battery module swap doesn't generate a separate labor invoice. Total cost of ownership stays predictable.
- Unit Replacement Provision: Vertiv will replace the GXT4-700RT120 outright during the extension period if needed — same conditions as the standard warranty. For a UPS that's protecting always-on gear, a depot repair turnaround is a real operational exposure; whole-unit replacement is the faster path back to protected status.
Deployment Considerations:
- The purchase-at-same-time-as-hardware requirement is the most common procurement miss with this SKU. Flag it on the hardware PO template for any GXT4-700RT120 deployment — you cannot retroactively add this coverage after the unit ships.
- Serial numbers are required at enrollment. In a multi-UPS deployment, track which serial maps to which contract SKU from day one — asset management becomes the failure point in environments where coverage levels vary across units.
For integrators deploying GXT4-700RT120 units in security operations centers, small data rooms, or edge network closets where a UPS failure means unprotected infrastructure during a power event, the 1WEGXT4-700120 is the straightforward risk mitigation line item that belongs on every hardware quote alongside the unit itself.
