Middle Atlantic 1SP PNL W/(2)DECORA OP BK - DECP-1X2

Middle Atlantic DECP-1X2 1RU Decora Device Rack Panel

Overview

The Middle Atlantic DECP-1X2 is a single rack unit (1RU) blank panel machined with two Decora-style knockout openings, designed for integrators who need a clean, low-profile way to install Decora-format devices — switches, outlets, keystone inserts, or control interfaces — directly into a 19-inch equipment rack. At just 0.52 inches deep, the DECP-1X2 occupies virtually no rack depth, which matters when you're working with shallow-depth enclosures or dense rack buildouts where every inch counts.

This is a panel for professionals who want a finished, rack-native appearance rather than improvised mounting. If you've ever taped a Decora switch to a rack shelf or used adhesive brackets to get a wall-plate device into a rack bay, the DECP-1X2 is the right answer — it gives you a factory-quality install in a single rack unit without sacrificing depth or adding clutter.

Key Features

• Two Decora Knockouts in 1RU: Both openings accept standard Decora-format devices side by side in a single 1.75-inch rack unit — so you're not burning a 2RU slot to accommodate two devices. In a 12RU or 16RU enclosure, that space efficiency adds up across a multi-panel install.
• 19-Inch Standard Rack Width: At exactly 19 inches wide with two mounting points, the DECP-1X2 drops into any EIA-standard 19-inch rack or cabinet without modification or adapters. Integrators can mix it freely with other 19-inch rack gear from any vendor.
• 0.52-Inch Depth Profile: The panel extends only 0.52 inches (1.3 cm) behind the rack rail. This makes it viable in shallow-depth wall-mount enclosures and tight rack spaces where deeper panels would conflict with cable management or rear-mounted equipment.
• 1.75-Inch Height (1RU): Standard 1RU height keeps the panel compatible with any rack unit spacing. No odd half-unit gaps, no shimming required — it seats flush against adjacent panels in a normal rack layout.
• Two Rack Mounting Points: Dual mounting points provide secure, wobble-free attachment to standard rack rails. Properly torqued, the panel stays rigid even if devices installed in the knockouts see regular interaction — toggle switches, button presses, or connector insertions.
• Clean Finished Look for Customer-Facing Installs: For integrators delivering rack systems to end clients — conference rooms, security operations centers, server closets — panel aesthetics matter. The DECP-1X2 gives a purpose-built look rather than a field-modified workaround, which reflects on the quality of the overall install.

Integration and Compatibility

The DECP-1X2 (often searched as DECP 1X2) accepts any standard Decora-format device insert — the same form factor used across a wide range of manufacturers for low-voltage switches, keystone patch inserts, HDMI/USB pass-throughs, and power outlets. It mounts in any EIA 310-compliant 19-inch rack or rack enclosure. With only two mounting holes and a 0.52-inch depth, it integrates into both open-frame racks and enclosed rack cabinets without tools beyond a standard screwdriver. The panel ships without devices pre-installed, so you specify and populate exactly the inserts your project requires.

This panel is part of the broader Middle Atlantic rack accessories line, which includes complementary blanking panels, cable management, and rack enclosures. For builds that require Decora-style device integration in a rack panel format, the DECP-1X2 pairs naturally with Middle Atlantic enclosures and power strips. If you're specifying PoE infrastructure alongside this rack build, see the PoE switch category for compatible network hardware to populate adjacent rack slots.

Frequently Asked Questions

Q: What rack size does the DECP-1X2 fit?

A: The DECP-1X2 is 19 inches wide and 1.75 inches tall (1RU), fitting any standard EIA 310-compliant 19-inch rack or rack enclosure.

Q: How many Decora device openings does the DECP-1X2 have?

A: It has two Decora-style knockouts, allowing you to install up to two standard Decora-format devices side by side in a single rack unit.

Q: Will the DECP-1X2 work in a shallow wall-mount enclosure?

A: Yes. At only 0.52 inches (1.3 cm) deep, it is well suited for shallow-depth enclosures where most panels would cause clearance issues.

Q: Does the DECP-1X2 come with Decora devices pre-installed?

A: No. The panel ships with open knockouts. You supply and install your own Decora-format devices — switches, keystone inserts, outlets, or similar.

Q: How many rack mounting points does the DECP-1X2 use?

A: Two mounting points, one on each side, for standard rack rail attachment.

Q: Can the DECP-1X2 be used in open-frame racks as well as enclosed cabinets?

A: Yes. The standard 19-inch two-point mount is compatible with both open-frame two-post and four-post racks and fully enclosed rack cabinets.

Marty Allison

The DECP-1X2 is one of those parts that experienced integrators keep stocked because the alternative — improvising Decora device placement in a finished rack — always looks like a workaround. At 0.52 inches deep and exactly 1RU tall, it fits into any standard rack slot without any dimensional compromise, and you get two Decora knockouts to populate however the project demands.

Technical Highlights:

• Dual Decora Knockouts in 1RU: Two standard Decora openings in a 1.75-inch panel height — you're not giving up a second rack unit to accommodate a second device. In space-constrained enclosures, that matters.
• 0.52-Inch Depth: At just over half an inch behind the rack rail, this panel won't conflict with cable trays, rear-mounted switches, or the back panel of a shallow-depth wall-mount enclosure.
• 19-Inch Standard Width, 2-Point Mount: Drops into any EIA 310-compliant rack with two standard screws. No adapters, no shimming, no proprietary hardware.

Deployment Considerations:

• The knockouts ship open — factor in the cost and lead time of your Decora device inserts separately. Don't spec the panel without confirming device availability, especially for specialty inserts on a tight project schedule.
• Two mounting points is standard for 1RU panels, but if the installed Decora devices will see frequent physical interaction (toggle switches, repeated connector plug/unplug), make sure the rack rail threads are in good condition before torquing down. A stripped rail hole on a 1RU panel with only two attachment points will leave you with a loose panel.

The DECP-1X2 is a natural fit for AV control rooms, security operations centers, and any rack build where you need to surface Decora-format controls or pass-throughs at a specific rack position — particularly in shallow enclosures mounted in walls or low-depth telecom spaces where a deeper panel simply won't clear.