Middle Atlantic 19SP 27DEEP Plexi Door & BIT Cherry TOP - BGR-19SA27MDK-E0

Middle Atlantic BGR-19SA27MDK-E0 19RU Mobile AV Rack with Plexi Door and Biltmore Cherry Laminate Top

The Middle Atlantic BGR-19SA27MDK-E0 is a 19-rack-unit mobile AV rack built for broadcast, security operations, and enterprise AV-over-IP deployments where you need a freestanding, road-worthy enclosure that can carry serious gear and still look presentable in a client-facing space. At 1,100 lbs UL-rated load capacity across 19 RU of usable space, this is not a light-duty equipment cart — it is a production-grade steel enclosure with a Biltmore Cherry wood laminate top, plexi front door, and rear door, assembled in the USA and TAA compliant for government and federally funded projects. If you are configuring a mobile command post, a security integrator's demo rack, or a permanent-but-relocatable equipment bay, the BGR-19SA27MDK-E0 deserves a close look.

Overview

The BGR-19SA27MDK-E0 ships as a complete mobile rack enclosure — steel frame with black wrinkle powder coat finish, 25mm x 150mm swing handles for controlled transport, plexi front door for ventilation with visual equipment access, and a full rear door for cable management and servicing without moving the rack. The Biltmore Cherry wood laminate top is the finish detail that sets this configuration apart from bare-metal shop racks: it reads as furniture-grade in board rooms, executive operations centers, and client demonstration environments without sacrificing structural integrity. Forward-compatible rackrails mean you can adapt the interior layout as equipment evolves. Monitor mounting support is built in, useful for security integrators staging NVR-plus-display systems prior to on-site deployment.

Key Features

• 1,100 lb UL-Listed Load Capacity: The 1,100 lb UL-certified rating means you can fill every rack unit with dense server, NVR, or AV processing gear without worrying about frame deflection or caster stress. A fully loaded 19 RU rack with 2U NVRs, patch panels, and UPS typically runs 400–700 lbs — this rack has substantial headroom. The UL listing means the load rating is independently verified, not a marketing estimate.
• 19 RU / 24.4-inch Usable Depth: Nineteen rack units of mounting space with 24.4 inches of usable depth accommodates virtually all commercial NVRs, managed switches, and rackmount UPS units without requiring rear-mount extenders. Deep gear (some 2U servers and UPS units run 26–28 inches) should be measured against the 24.4-inch usable depth before ordering — this is the spec to verify for those edge cases.
• Steel Frame with Black Wrinkle Powder Coat: Steel construction with a textured powder coat finish resists scratch and mar from repeated moves and installation traffic. In mobile deployments, powder coat outlasts paint under the kind of contact stress that comes from gear sliding in and cable pulls.
• Plexi Front Door + Full Rear Door: The plexi front door lets you read LED status indicators and confirm equipment power state without opening the enclosure — operationally useful in security NOC and operations center deployments. The rear door provides clean access for cabling and servicing from behind without repositioning the rack.
• Biltmore Cherry Wood Laminate Top: The Cherry laminate top converts the rack into usable surface area — staging space for monitors, laptops, or documentation during installation, and a finished surface in client-facing environments post-deployment. This is the configuration differentiator in the BGR MDK line.
• Forward-Compatible Rackrail Design: Forward-compatible rackrails allow you to reposition the mounting rail column forward or back to accommodate equipment with non-standard ear geometry, without replacing the rack itself. Relevant when mixing legacy and current-gen gear in the same frame.
• 25mm x 150mm Swing Handles: The oversized swing handles are sized for a two-person controlled carry and are robust enough for repeated moves across loading docks and elevator thresholds. Not decorative hardware — these are sized for actual deployment logistics.
• TAA Compliant, USA Origin: The BGR-19SA27MDK-E0 is TAA compliant with country of origin USA, which satisfies federal procurement requirements under the Trade Agreements Act. If you are quoting this rack for a government, DoD, or GSA-schedule project, TAA compliance is already confirmed — no substitution required.
• Monitor Mounting Support: Factory support for monitor mounting means you can integrate a display directly into the rack structure for on-site commissioning or permanent NOC/operations center use, without sourcing a separate monitor stand or modifying the frame.

Integration and Compatibility

The BGR-19SA27MDK-E0 uses a standard 19-inch EIA panel width, making it compatible with all standard rackmount equipment — NVRs, managed PoE switches, UPS units, patch panels, KVM switches, and AV processing gear. The forward rackrail design accommodates both shallow and deep equipment profiles. At 24.4 inches of usable depth, verify deep-chassis equipment (rackmount UPS units 1500VA and above, some 2U storage arrays) against your specific models before finalizing the build. The rack's mobile base and swing handles make it suitable for staged deployment: configure and test at your shop, then roll into final position at the install site. For network video recorders and multi-camera surveillance systems, this rack provides the structural capacity to house the full system stack — NVR, switch, UPS, and patch panel — in a single mobile enclosure. Pair with a rack accessories kit for cable management and blanking panels to complete the installation. Buyers evaluating Middle Atlantic rack systems for AV and security integration work will find the BGR MDK series covers the mobile and semi-permanent deployment range.

Frequently Asked Questions

Q: Is the BGR-19SA27MDK-E0 TAA compliant for federal and government procurement?

A: Yes. The BGR-19SA27MDK-E0 is TAA compliant with country of origin listed as USA. It satisfies Trade Agreements Act requirements for federal, DoD, and GSA-schedule purchases.

Q: What is the UL-rated load capacity of the BGR-19SA27MDK-E0?

A: The UL-listed load capacity is 1,100 lbs (499 kg). This is an independently verified rating, not a manufacturer estimate.

Q: How much usable rack depth does the BGR-19SA27MDK-E0 provide?

A: Usable depth is 24.4 inches (62 cm). Most rackmount NVRs, switches, and UPS units fit within this depth. Verify deep-chassis equipment (some 2U UPS units exceed 26 inches) before ordering.

Q: What does the 'MDK' suffix mean in the BGR-19SA27MDK-E0 model number?

A: MDK designates the Biltmore Cherry wood laminate top configuration in Middle Atlantic's BGR mobile rack line — a furniture-finished top surface suited for client-facing and operations center installations.

Q: Does the BGR-19SA27MDK-E0 ship assembled?

A: Based on available product data, the rack ships as a complete enclosure. Shipping weight is 191 lbs versus a product weight of 165 lbs, consistent with a fully assembled unit in protective packaging. Confirm assembly status with your order if this is critical to your installation timeline.

Q: Can the BGR-19SA27MDK-E0 support a monitor mount?

A: Yes. Monitor mounting is supported as a factory-built feature of this rack configuration, suitable for integrating a display for NOC, operations center, or on-site commissioning use.