Vivotek FE9391-EHV-V2(IO CABLE) 2MP Panoramic IP Camera

Vivotek FE9391-EHV-V2(IO CABLE) Panoramic Camera IO Cable

Overview

The FE9391-EHV-V2(IO CABLE) is the dedicated I/O connector cable for the Vivotek FE9391-EHV-V2 2MP panoramic surveillance camera. This cable provides the physical connection layer between the camera's I/O port and external alarm devices, motion sensors, or access control triggers — critical for deployments where the panoramic camera needs to integrate event-driven logic rather than operate as a passive sensor. Use this when you're wiring the FE9391-EHV-V2 into a larger security system that requires relay outputs to doors, strobes, or third-party event handlers.

Compatibility

Compatible exclusively with the Vivotek FE9391-EHV-V2 2MP panoramic IP camera. The IO cable connects directly to the camera's I/O terminal block, enabling alarm input and relay output circuits. Do not use with other Vivotek camera models or families — each product line has its own I/O connector pinout. Verify your camera is a FE9391-EHV-V2 variant before ordering.

Installation Notes

Route the IO cable from the camera's I/O port to your external device (alarm panel, motion detector, or relay module). Secure excess cable length to prevent stress on the connector. The cable is not field-repairable — if damaged, the entire cable assembly must be replaced. Keep the connector unplugged until you have verified the wiring scheme with the FE9391-EHV-V2 user manual to avoid cross-wiring alarm circuits or relay outputs, which could damage downstream equipment or trigger unintended system actions.