Panduit LD10IW10-A Pan-Way® 10ft Single Channel Surface Raceway
The Panduit LD10IW10-A is a 10-foot section of LD10 Pan-Way® single channel surface raceway engineered for commercial integrators who need to route, protect, and conceal low-voltage cabling in retrofit installations where in-wall runs aren't feasible. The one-piece hinged PVC channel measures 1.51 inches wide by 0.94 inches deep, providing clean routing for data, voice, and video cables in office environments, retail spaces, and light-duty enterprise applications. Factory-applied adhesive backing eliminates the need for mechanical fasteners on most wall surfaces, cutting labor time during cable pathway additions and tenant improvements.
Key Features
- One-piece hinged design — cables lay in without threading, cover snaps shut to secure
- Factory-applied adhesive backing — mounts directly to drywall, painted surfaces, or metal without drilling
- 1.51" × 0.94" internal pathway — accommodates up to 8–10 Cat6 cables or equivalent fiber runs depending on bend radius requirements
- Off White rigid PVC construction — matches standard office trim, paintable if color-match to walls is required
- UL94V-0 and FT4 flame ratings — meets TIA/EIA standards for low-voltage applications up to 50V
- Compatible with Panduit LD surface mount boxes and Mini-Com termination solutions — integrates with existing Pan-Way® ecosystems
- 10-foot length ships in cartons of 10 sections — reduces seams on long runs compared to 6-foot alternatives
The LD10 raceway solves the cable-exposure problem common in open-plan offices, conference rooms, and perimeter wall installations where pulling cable through drywall isn't authorized or cost-effective. The hinged cover opens along its length for easy cable placement—no need to feed conductors through the channel end-to-end—then snaps closed with a positive latch. Installers working alone can prep the raceway on a bench, load cables, and mount the entire assembly to the wall in one pass. The factory-applied 3M-grade adhesive bonds to smooth painted drywall, sealed concrete block, glass, and powder-coated steel; rough or porous surfaces may require mechanical anchors at 24-inch intervals for pull-force compliance. Internal dimensions support typical enterprise cable bundles: a 1.51-inch width handles four Cat6 cables side-by-side with proper fill ratio (40% per NEC 300.17), or mixed loads of copper and fiber. For larger bundles or future expansion, the LD20 two-channel variant offers dual compartments in the same footprint.
Deploy the LD10IW10-A in retrofit projects where aesthetics and building codes intersect—hospitals adding nurse-call cables to existing patient rooms, schools running AV feeds to projector locations, or offices connecting Wi-Fi access points after the building occupancy permit was issued. The off-white finish blends with standard ceiling tiles and baseboards; if the wall color is a poor match, the PVC surface accepts latex paint (light sanding recommended for adhesion). Terminate runs using Panduit's LD10 surface mount outlet boxes for flush-mount jacks, or transition to Mini-Com modules where consolidation points are needed. The raceway's 0.94-inch depth keeps the wall profile low—critical in high-traffic corridors where projecting conduit creates a snag hazard. For compliance documentation, the UL94V-0 rating and FT4 flame test results satisfy fire marshal inspections in commercial occupancies; TIA/EIA adherence covers structured cabling audits during tenant move-ins.
The LD10IW10-A ships in 10-piece cartons (200 feet total), with each section cut to exactly 10 feet—no field trimming required for standard ceiling-height drops or 8-foot desk runs with overhead routing. Installers stocking a project trailer can calculate linear footage needs precisely: a 40-workstation floor plate with perimeter raceway averages 12–15 sections depending on column spacing and corner fittings. Panduit's LD accessory line includes inside corners (90° and 45°), tee fittings, and end caps to handle pathway changes without exposed cable. For integrators already standardized on Pan-Way® systems, the LD10IW10-A drops into existing supplier agreements and maintains parts compatibility across multi-building campuses where maintenance crews expect uniform raceway profiles and termination hardware.
