Panduit PT-GND Ground Wire Warning Safety Tag Holder

Overview

The Panduit PT-GND is a 100-pack of ground wire warning tags engineered for electrical safety compliance in commercial and industrial installations. Each tag measures 2.75" W x 1.38" H and carries the legend "Warning ground wire do not remove" — a direct, unambiguous label for any grounded conductor or equipment bonding point where accidental disconnection creates a shock or fire hazard. If you're wiring Panduit structured cabling or electrical systems and need a compliant, durable way to mark ground conductors, the PT-GND (often searched as PT GND) is the standard pick from Panduit's safety labeling line.

Key Features

• 2.75" x 1.38" Tag Dimensions: Sized to fit standard wire and cable management tags holders without trimming. The 69.9mm x 35.1mm footprint is large enough to read at a glance during panel inspections, which matters in dense enclosures where misidentification of a ground conductor can delay troubleshooting or cause a safety incident.
• Semi-Rigid Polyethylene Construction: Unlike paper or vinyl labels that tear, curl, or degrade from heat and cleaning solvents, the semi-rigid polyethylene body holds its shape on the wire over years of service. In electrical safety labeling applications inside control panels or on grounding busbars, physical durability directly reduces re-labeling labor costs.
• Black/Yellow Color Scheme: The black-on-yellow color follows established electrical safety convention for warning-level hazards. Installers and inspectors recognize this color combination immediately — no ambiguity about the tag's intent during audits or service calls.
• Pre-Printed "Warning Ground Wire Do Not Remove" Legend: Factory-printed text means consistent, legible marking across every installation — no hand-writing variation, no smeared ink, no compliance gaps from field-applied labels that don't meet marking standards.
• 100 Tags per Package: A single PT-GND package covers a large panel or a full rack row of grounded equipment. For integrators running cable management and bonding projects across multiple cabinets, buying in 100-count packs reduces per-tag cost and eliminates mid-job reorders.
• RoHS Compliant: The polyethylene formulation meets RoHS restrictions on hazardous substances — relevant for installations in EU-market equipment or any project with environmental compliance requirements in the bill of materials.
• Carton Quantity of 5 Packages: Stocking in carton quantities (5 x 100 = 500 tags) makes sense for integrators running recurring panel builds or facilities teams maintaining large electrical infrastructure. Bulk stocking eliminates repetitive small orders.

Integration and Compatibility

The PT-GND tags are designed for use with Panduit's tag holder accessories and standard cable tie mounts used in electrical enclosures, switchgear, and grounding systems. They are compatible with any application requiring a 2.75" x 1.38" tag format. Pair with Panduit cable ties and mounting hardware for a complete grounding identification system on bonding conductors, equipment chassis grounds, and grounding electrode conductors.

What's in the Box

• 100x Panduit PT-GND ground wire warning tags (semi-rigid polyethylene, black/yellow, pre-printed legend)

Frequently Asked Questions

Q: How many tags are included in one package of the PT-GND?

A: Each PT-GND package contains 100 tags. The carton quantity is 5 packages (500 tags total per carton).

Q: What material are the PT-GND tags made from?

A: The tags are made from semi-rigid polyethylene, which resists tearing, curling, and degradation from heat or solvents better than paper or standard vinyl labels.

Q: What are the exact dimensions of each PT-GND tag?

A: Each tag is 2.75 inches wide by 1.38 inches tall (69.9mm x 35.1mm).

Q: Is the PT-GND RoHS compliant?

A: Yes, the PT-GND meets RoHS compliance standards as listed in the product specifications.

Q: What is the legend printed on the PT-GND tag?

A: Each tag is pre-printed with the legend: "Warning ground wire do not remove" in black on a yellow background.

Q: What color are the PT-GND tags?

A: Black text on yellow background, consistent with standard electrical warning color coding conventions.

Eden Phillips

The PT-GND is a deceptively simple product that gets overlooked until an inspector flags an unmarked ground conductor or a tech accidentally disconnects a bonding wire during service. The 2.75" x 1.38" semi-rigid polyethylene construction means these tags stay readable and intact on the wire for the life of the installation — not just until the next cleaning crew runs a solvent wipe through the panel.

Technical Highlights:

• 100 Tags per Package: Covers a full medium-density panel or a complete row of grounded rack equipment in one package — relevant when you're labeling every grounding electrode conductor and equipment bond point on a large installation.
• Semi-Rigid Polyethylene: Holds its flat form on the tag holder without curling or tearing, which matters in warm enclosures where adhesive labels fail and paper tags degrade within months.
• RoHS Compliant: Meets hazardous substance restrictions, so these tags can be specified into EU-market equipment builds or any project requiring a clean environmental compliance record on all installed materials.

Deployment Considerations:

• The 2.75" x 1.38" format is designed for Panduit tag holders — verify your existing holder or mount accepts this footprint before ordering in carton quantities.
• At 100 tags per package, a single PT-GND pack is the right quantity for most single-panel jobs; for multi-cabinet facility builds, order by the carton (5 packs) to avoid mid-project shortages.

The PT-GND is the right call for electrical contractors and systems integrators running bonded grounding systems in commercial switchgear, telecom rooms, or industrial control panels where NEC-compliant ground identification is a requirement, not an afterthought.