Panduit NWSLC2-3Y Cable Identification Sleeve, Orange, 100-Pack
Overview
The Panduit NWSLC2-3Y is a 2-inch flexible PVC identification sleeve designed specifically for 3mm simplex cable — the type of cable most commonly found in structured cabling runs, fiber patch installations, and security system wiring closets. At 2.25 inches in overall length and 0.3 inches in height, these sleeves slide over individual cable strands and accept printed labels, giving installers a durable, color-coded identification method that stays put through the life of the installation. The orange color designation makes it immediately readable in dense patch environments where visual triage needs to happen fast. NWSLC2-3Y (often searched as NWSLC2 3Y) is part of Panduit's LabelCore™ identification system, a coordinated family of sleeves, labels, and printers engineered to work together rather than requiring field improvisation with aftermarket materials.
Key Features
- Orange Color-Coding: In a packed rack or wiring closet, color is the fastest visual signal an installer or technician has. Orange sleeves on 3mm simplex runs let you assign and enforce a cabling convention — circuit type, zone, priority — without pulling cables to read a tag on the far end. When a port goes down at 2 AM, the color tells you which circuit before you touch anything.
- 2-Inch Flexible PVC Construction: The 2.25-inch overall length gives enough sleeve surface to anchor a label firmly without bunching on tight bend radii. Flexible PVC, unlike rigid plastic alternatives, conforms slightly around the cable jacket, which reduces migration during cable movement — relevant on patch panels where cables get pulled and re-seated regularly. The material also resists the mild solvents found in most data center cleaning protocols.
- Designed for 3mm Simplex Cable: Fit matters in identification systems. The NWSLC2-3Y is dimensioned for 3mm simplex — the standard jacket diameter for single-strand fiber and many copper control wires used in access control and security camera runs. Using the correctly sized sleeve eliminates the slippage and rotation that makes labels unreadable after a few months of cable movement.
- Compatible with Laser/Inkjet and Thermal Transfer Labels: The sleeve accepts two verified label stocks: S200X150YAJ for laser and inkjet printers, and S200X150VATY for thermal transfer printers. This means your existing label printer — whether it's a desktop laser or a dedicated thermal transfer unit — is already supported. You don't need to source a new printer or a proprietary printing system to use this identification system.
- 100-Piece Package, 1000-Piece Carton: The 100-piece package quantity is sized for a single project or a closet refresh without over-ordering. For larger deployments — a new building floor, a data center row, a full camera system installation — the 1000-piece carton quantity (10 packages) keeps per-unit cost down and reduces reorder friction. Plan your label quantities against the carton break, not the single package.
- RoHS Compliant: RoHS compliance means the PVC formulation meets EU Directive 2011/65/EU restrictions on hazardous substances — relevant for any project with European export requirements, green building certifications, or corporate sustainability procurement mandates. For domestic-only installations it's a non-issue, but for multi-region deployments it eliminates a sourcing question.
Integration and Compatibility
The NWSLC2-3Y is engineered to work within the Panduit LabelCore™ system. The two verified compatible label stocks are S200X150YAJ (for laser and inkjet output) and S200X150VATY (for thermal transfer printers). These labels are sized and surface-treated to adhere reliably inside the sleeve and remain legible under normal handling. Do not substitute generic labels — off-spec adhesive or caliper thickness will affect how the label seats inside the sleeve and how well it resists edge-peeling over time.
These sleeves are used across cable management and identification applications in structured cabling, security system wiring, and network infrastructure. They are suited to any installation where 3mm simplex cable — fiber or copper — needs persistent, maintainable identification that survives the normal lifecycle of moves, adds, and changes. For color-coded cable infrastructure projects, having the correct Panduit identification accessories on hand from the start prevents rework during certification or handoff.
For installations requiring a broader identification toolkit — floor labels, rack asset tags, patch panel markers — review the full signs, labels, and identification category to coordinate label media, printers, and sleeves as a system rather than individual components.
What's in the Box
- 100x Panduit NWSLC2-3Y Orange PVC Identification Sleeves (2-inch, for 3mm simplex cable)
Frequently Asked Questions
Q: What cable diameter does the NWSLC2-3Y fit?
A: The NWSLC2-3Y is designed for 3mm simplex cable — the standard jacket diameter for single-strand fiber and many copper control cables used in security and network installations. Verify your cable's jacket OD before ordering to ensure proper fit and label stability.
Q: What labels are compatible with the NWSLC2-3Y?
A: Two label stocks are verified compatible: S200X150YAJ for laser and inkjet printers, and S200X150VATY for thermal transfer printers. These are Panduit LabelCore™ labels sized to seat correctly inside the 2-inch sleeve. Substituting off-spec labels may result in poor adhesion or label migration.
Q: How many sleeves come in a package, and is a larger quantity available?
A: Each package contains 100 sleeves. The standard carton quantity is 1000 pieces (10 packages), which is the recommended purchase unit for larger deployments or full-floor cabling projects.
Q: Is the NWSLC2-3Y RoHS compliant?
A: Yes. The NWSLC2-3Y meets RoHS compliance standards, making it suitable for projects with European regulatory requirements, green building mandates, or corporate sustainability sourcing policies.
Q: Can I use the NWSLC2-3Y on duplex fiber cable?
A: The NWSLC2-3Y is sized for 3mm simplex cable. Duplex cable has a different jacket profile and will not seat correctly in this sleeve. Panduit offers other identification sleeve variants sized for duplex and larger cable types — confirm your cable's jacket diameter before selecting a sleeve part number.
The NWSLC2-3Y is a specificity play — it is not a generic cable marker but a sleeve dimensioned for exactly 3mm simplex cable with a verified label compatibility matrix. When I spec cable identification for security camera backbone runs or access control wiring closets, the failure mode I see most often is installers grabbing whatever sleeve is on the shelf, ending up with a loose fit, and finding that labels have rotated 180° or migrated out entirely within a year. The 2-inch PVC sleeve on the NWSLC2-3Y, at 0.3 inches in height, is tight enough on 3mm simplex to hold position without heat-shrinking, which matters in environments where you're re-seating cables regularly.
Technical Highlights:
- Sleeve Length (2.25 in / 57.2 mm): Long enough to carry a full printed label from either the S200X150YAJ (laser/inkjet) or S200X150VATY (thermal transfer) stock — verified label media, not field-guessed substitutes. This is the spec that determines whether your label is readable six months after installation or curled and half-ejected.
- Package Quantity (100/pack, 1000/carton): The 100-piece package is the right unit for a single wiring closet or camera system; the 1000-piece carton is the right unit for a full floor or building. Order at the carton break when your count exceeds 200 — it's a straightforward cost decision.
- RoHS Compliance: PVC formulation meets RoHS — relevant for government facility projects, LEED-certified builds, or any client with a restricted substances policy in their procurement specs. Check the project RFP before substituting a non-compliant sleeve to save a few cents per unit.
Deployment Considerations:
- The NWSLC2-3Y is strictly for 3mm simplex cable. If your installation mixes simplex and duplex runs — common in hybrid fiber/copper security systems — order the correct sleeve variant for each cable type. A sleeve that's loose on a duplex jacket will rotate and make the label unreadable at the worst possible moment: during a troubleshooting event.
- Label stock selection is not optional. The two verified stocks (S200X150YAJ and S200X150VATY) are matched to the sleeve's internal surface treatment. Generic label stock from a big-box office supplier will not have the same adhesive profile and is likely to fail under the minor mechanical stress of cable movement in a live patch environment.
For a structured cabling contractor or systems integrator running 3mm simplex fiber to IP camera endpoints or access control readers — environments where port-level identification is required for certification sign-off and ongoing MAC work — the NWSLC2-3Y delivers a compliant, printer-matched identification solution without requiring a proprietary labeling ecosystem.
