Zebra KT-PAD-RS507-10R RS507 Ring Scanner Replacement Comfort Pads — 10-Pack
Overview
The Zebra KT-PAD-RS507-10R is a 10-pack of genuine replacement comfort pads designed specifically for the RS507 hands-free ring scanner when deployed in manual trigger configurations. In high-throughput warehouse, distribution center, and fulfillment environments, wearable ring scanners take a beating — workers wear them continuously across full shifts, and the comfort pad is the primary contact point between the device and the finger. When pads wear down or degrade, scan ergonomics suffer, worker fatigue increases, and scan accuracy can drop as the scanner shifts position. Keeping KT-PAD-RS507-10R packs on hand as a consumable maintenance item is standard practice for any operation running RS507 fleets at scale.
Each pad in this kit is manufactured to Zebra's original fit specification for the RS507's manual trigger mount, ensuring the replacement seats correctly without improvised fitting or tape workarounds that introduce misalignment. Stocking a 10-pack means a supervisor can swap pads for an entire small team in one maintenance window, or replenish a larger fleet's supply closet with a single SKU order.
Key Features
- 10-Unit Pack Format: The KT-PAD-RS507-10R ships 10 comfort pads per kit — enough to refresh a full small team's scanners in a single maintenance pass, or serve as a replenishment unit for larger RS507 fleets. Ordering by the pack rather than individually reduces requisition overhead and keeps per-unit cost manageable.
- Manual Trigger Configuration Compatibility: These pads are specified for RS507 units running in manual trigger mode — not the always-on trigger variant. If your RS507 units are configured for hands-free/always-on operation, verify the mount style before ordering; pad geometry differs between configurations.
- Genuine Zebra Replacement Part: Factory-new parts sourced through the Zebra supply chain, not aftermarket substitutes. Aftermarket comfort pads frequently deviate in thickness or material durometer, causing the scanner to sit off-angle on the finger — which shifts the scan window and introduces read failures at close range.
- Lightweight Consumable Stock: At 0.23 lb for the full 10-pack, the KT-PAD-RS507-10R adds negligible weight to maintenance kit inventories and ships efficiently in standard parcel. No special handling required for storage or transport.
- UNSPSC Classification 26121636: Properly classified under the Carrying and Protective Accessories hierarchy, which simplifies procurement routing for organizations using UNSPSC-coded purchasing systems — the code matches standard enterprise purchasing catalog structures for scanner accessories.
- US Country of Origin: Documented country of origin is the United States, which matters for contracts with TAA or Buy American compliance requirements on accessory purchases.
Compatibility
The KT-PAD-RS507-10R is compatible exclusively with the Zebra RS507 ring scanner in manual trigger configurations. The RS507 is Zebra's Bluetooth ring-mounted imager, commonly paired with WT5000 and WT6000 wearable terminals in warehouse scanning workflows. These pads are not interchangeable with comfort pads from other Zebra ring scanner families (RS4000, RS5000, RS6000) — each generation uses a distinct mount geometry. If you are running a mixed RS507/RS6000 fleet, order the correct pad SKU per device generation.
For integrators managing wearable computer deployments at scale, pairing this consumable stock order with a review of your Zebra accessories catalog — trigger springs, stylus kits, and protective boots — at the same time reduces the number of separate purchase orders needed to keep a fleet running. Consult your scanner accessory selection guide if you are standardizing a new RS507 deployment and need to identify which consumable SKUs belong in your maintenance kit.
What's in the Box
- 10x RS507 replacement comfort pads (manual trigger configuration)
Frequently Asked Questions
Q: Will the KT-PAD-RS507-10R work with RS507 units configured for hands-free (always-on) trigger mode?
A: No. These pads are specified for manual trigger configurations of the RS507. The mount geometry differs between manual and always-on trigger variants, so verify your RS507 configuration before ordering.
Q: How many pads are included in the KT-PAD-RS507-10R kit?
A: The kit contains 10 replacement comfort pads — enough to service 10 individual RS507 units or serve as a replenishment stock for a larger fleet.
Q: Are these OEM Zebra parts or aftermarket replacements?
A: These are genuine Zebra replacement parts (MFG code ZEB), sourced through the Zebra supply chain — not aftermarket substitutes. Aftermarket pads can deviate in fit and material, causing scanner misalignment on the finger.
Q: What is the country of origin for the KT-PAD-RS507-10R?
A: Country of origin is documented as the United States, which supports TAA and Buy American compliance requirements on accessory purchases where applicable.
Q: Are these pads compatible with other Zebra ring scanners like the RS6000 or RS5000?
A: No. Each Zebra ring scanner generation uses a distinct mount geometry. The KT-PAD-RS507-10R is designed specifically for the RS507 and is not interchangeable with RS4000, RS5000, or RS6000 comfort pads.
Q: What is the packaged weight and dimensions for this kit?
A: The KT-PAD-RS507-10R ships at 0.23 lb gross weight in a package measuring 9.00 in × 6.50 in × 1.50 in, making it easy to include in standard parts orders without special freight considerations.
The KT-PAD-RS507-10R is a consumable you should be ordering before you need it, not after workers start complaining about scanner drift. In manual trigger RS507 deployments — particularly in fulfillment centers running two- or three-shift operations — comfort pad wear is predictable and manageable if you treat it like any other wearable consumable with a replenishment cycle, not a break-fix item.
Technical Highlights:
- 10-Pack Quantity: At 10 units per kit, one order covers a small team's full refresh or serves as a baseline stock unit for larger fleets — reduces procurement fragmentation compared to ordering individual pads.
- Manual Trigger Fit Specificity: The pad geometry is defined for RS507 manual trigger mount configurations; this is not a universal Zebra ring scanner pad and will not seat correctly on always-on trigger or other RS-series generations.
- US Origin, 0.23 lb Gross: Lightweight enough to bundle into any standard parts shipment at negligible freight cost — and the US country of origin documentation is already in the supply chain record for TAA-sensitive procurement workflows.
Deployment Considerations:
- Build pad replacement into your RS507 preventive maintenance schedule — waiting for worker complaints means scanner misalignment has already been affecting read rates for some period before it surfaces.
- Confirm your RS507 trigger configuration (manual vs. always-on) before ordering; the pad SKU differs by configuration and ordering the wrong variant results in pads that won't seat properly, which is a common source of unnecessary returns on this accessory.
The KT-PAD-RS507-10R belongs in the standard maintenance kit for any warehouse or distribution operation running RS507 ring scanners in manual trigger mode — particularly cross-dock and pick-and-pass environments where wearables cycle through multiple workers per shift and ergonomic consistency directly affects throughput.
