BCD International BCD-700R-48 Milestone-Ready VMS Server

Overview

The BCD-700R-48 is a purpose-built video management server configured around an Intel Xeon E-2236 processor, 16GB of ECC-class memory, and 16TB of SATA storage — a specification set aimed squarely at mid-size VMS deployments that need dedicated compute headroom rather than a repurposed general-server chassis. Buyers researching this platform typically search it as BCD-700R-48 (often searched as BCD 700R 48), and the configuration on this page bundles the CPU, memory, boot drive, and bulk storage as a single ordered unit rather than separate line items. This is a build-to-order rack server, so lead time runs through the manufacturer rather than off-the-shelf stock — plan procurement accordingly if you're staging a rollout against a fixed install date.

Key Features

• Xeon E-2236 processor: a 6-core server-class CPU with ECC memory support, giving the recorder headroom to run analytics workloads and VMS services concurrently without the frame drops you'd see on a consumer-grade i5/i7 box under sustained 24/7 load.
• 16GB (2x8GB) memory configuration: dual-channel memory improves bandwidth to the CPU versus a single stick — relevant when the VMS is juggling live view, motion analytics, and database writes at the same time.
• 240GB M.2 BOSS boot card: isolating the operating system onto a dedicated M.2 boot device keeps Windows and the VMS application off the bulk recording array, so a busy write workload on the 16TB drive doesn't contend with OS I/O — a common bottleneck on servers that boot from the same array they record to.
• 16TB SATA HDD: a single high-capacity drive sized for extended retention windows; confirm your camera count, resolution, and retention policy against this capacity before ordering; larger deployments should size storage using the same calculation used for any camera-hours dee retention budget referenced in a storage and retention planning guide.
• 1.6TB BVA accelerator card: a dedicated accelerator card separate from the OS and bulk storage drives, giving the platform an additional fast-storage tier for workloads that benefit from low-latency I/O alongside the primary recording array.
• Dual 1GbE RJ45 network interfaces: two gigabit ports let you segment camera traffic from client/management traffic on separate NICs — a straightforward way to keep recording bandwidth off the same link your operators use to pull live view, and a detail worth mapping out during PoE and network planning for the camera side of the deployment.
• 350W power supply: sized for this CPU and drive configuration; if you expand storage or add expansion cards later, check the incremental draw against this power budget before populating additional bays.
• Windows 10 IoT Enterprise (embedded) OS: ships pre-loaded, so the server arrives ready to install a VMS package rather than requiring a from-scratch OS build — a real time savings on a commissioning day with a hard deadline.
• 5-year NBD KYHD warranty: next-business-day, keep-your-hard-drive coverage for five years — meaningful for a recording server, since a next-day part swap means far less recording downtime than a standard depot-return warranty, and the keep-your-hard-drive terms mean you never ship a drive holding recorded evidence back to the manufacturer.

Integration & Compatibility

The product listing identifies this configuration as Milestone-ready, meaning the hardware sizing (CPU cores, memory, and storage split between OS and recording volumes) is built around the resource profile Milestone XProtect recommends for a mid-tier recording server. That doesn't lock you into a single VMS platform — the dual NIC layout and Windows-based OS support most mainstream network video recorders and VMS software that runs on Windows Server or embedded builds. If you're pairing this server with a specific camera lineup, cross-check total camera count and bitrate against the 16TB usable capacity before finalizing the BOM, and review a camera selection guide if you haven't finalized resolution and frame rate targets yet. For sites deploying IP cameras from BCD International's broader hardware line or a third-party camera vendor, this server slots in as the recording backbone rather than a camera-specific appliance.

What's in the Box

The listing confirms the BCD-700R-48 ships as a complete rack server unit with the CPU, memory, 240GB M.2 boot card, 16TB SATA HDD, and 1.6TB accelerator card factory-installed; no separate accessory inventory (rails, cables, or bezels) is itemized in the manufacturer listing, so confirm rack-mounting hardware inclusion directly before ordering if that's a deciding factor for your rollout.

Frequently Asked Questions

Q: What CPU and memory does the BCD-700R-48 ship with?

A: It ships with an Intel Xeon E-2236 processor and 16GB of memory in a 2x8GB dual-channel configuration.

Q: How much storage does the BCD-700R-48 include?

A: The configuration includes a 240GB M.2 BOSS boot card, a 16TB SATA HDD for recording storage, and a separate 1.6TB BVA accelerator card.

Q: Is the BCD-700R-48 compatible with Milestone XProtect?

A: Yes, the manufacturer lists this configuration as Milestone-ready, sized for XProtect deployment.

Q: What warranty comes with the BCD-700R-48?

A: It carries a 5-year next-business-day, keep-your-hard-drive (NBD KYHD) warranty.

Q: What operating system is pre-installed on the BCD-700R-48?

A: Windows 10 IoT Enterprise (embedded) ships pre-loaded on the server.

Q: How many network interfaces does the BCD-700R-48 have?

A: Two 1GbE RJ45 network interfaces, useful for separating camera traffic from client/management traffic.

Marty Allison

What stands out on the BCD-700R-48 is the storage split: a dedicated 240GB M.2 BOSS card for the OS, a separate 1.6TB BVA accelerator card, and 16TB of SATA capacity for actual recording. That's not a typical single-drive recorder build.

Technical Highlights:

• Xeon E-2236 + 16GB (2x8GB): six server-class cores with dual-channel memory give you enough headroom to run VMS services and analytics without fighting for CPU cycles during peak recording load.
• 240GB M.2 BOSS boot card: keeping the OS off the 16TB recording drive means boot and application I/O never compete with write-heavy camera ingest.
• 1.6TB BVA accelerator card: a dedicated fast-storage tier separate from both boot and bulk recording, useful for workloads that need lower-latency access than a spinning 16TB SATA drive provides.

Deployment Considerations:

• The 350W power supply is sized for this exact configuration — if you're adding expansion cards or additional drives down the line, check the incremental draw before you populate more bays.
• This is a build-to-order server (listed Call For Availability), so it isn't a same-day shelf-pull; build lead time into your commissioning schedule, especially against a fixed go-live date.

This configuration fits a mid-size commercial site standardizing on Milestone XProtect where you want OS, accelerator, and bulk recording storage physically separated — not a bare-bones single-drive NVR replacement, and not sized for a large enterprise multi-hundred-camera site without adding storage.