Zebra SAC3600-KIT 4-Slot Battery Charger Kit
The Zebra SAC3600-KIT is a dedicated multi-device battery charging solution engineered for logistics, warehouse, and field service operations where rapid device turnaround is non-negotiable. This 4-slot charger enables simultaneous charging of up to four Zebra mobile computers or scanning devices, eliminating the bottleneck of sequential single-device charging and keeping your fleet operational throughout shifts.
Key Features
- 4-Slot Charging Capacity: Charge four Zebra mobile devices in parallel — critical when you're managing a fleet of 20+ field units and need predictable turnaround times. One hour of downtime per device compounds quickly; parallel charging cuts idle time drastically.
- Standard Zebra Battery Compatibility: Works with Zebra mobile computers and scanning devices using Zebra's standard battery form factors. Before purchase, verify your specific device models against Zebra compatibility specifications to ensure correct battery cradle pairing — this prevents costly mismatches in mixed-device environments.
- Included USA Power Cord: Ships with a standard USA power cord, so no additional sourcing required for immediate deployment. If you operate internationally, confirm voltage compatibility with regional variants (typically 110–240V, but verify against your facility's power infrastructure).
- Compact Footprint for Warehouse Deployment: 4-slot design consolidates charging into a single unit suitable for warehouse staging areas, service bays, or field depot configurations. Reduces clutter and centralizes device management compared to four individual chargers.
- Wired, Stationary Architecture: Mains-powered operation means no battery drain on the charger itself and consistent charge delivery regardless of facility power fluctuations. Ideal for fixed charging stations in warehouses, distribution centers, and service centers where devices rotate through predictable shift schedules.
- Fleet Operations Ready: Designed explicitly for environments where multiple Zebra mobile devices are in active circulation. Typical deployments: warehouse picking operations (10–50 devices per shift), field service routing (5–20 devices per region), logistics staging areas (high-volume device rotation).
Compatibility & Deployment Context
The SAC3600-KIT (often searched as SAC3600 KIT) integrates into standard warehouse and logistics workflows without requiring custom power distribution or unusual mounting infrastructure. Verify compatibility with your specific Zebra device models — different device families (e.g., MC3300 vs. MC9300 vs. DS3678 scanners) use varying battery form factors. Cross-reference your device serial numbers or SKUs against Zebra's official compatibility matrix before ordering to avoid installation delays.
Typical deployment pattern: Position the SAC3600-KIT at your shift-change area, dock staging zone, or service vehicle bay. Assign specific time blocks (e.g., end-of-shift, overnight) for parallel charging. A single 4-slot unit typically supports 15–30 active field devices depending on shift duration and charge cycle frequency.
What's in the Box
- 4-Slot Battery Charger Unit
- USA Power Cord
Frequently Asked Questions
Q: How long does it take to fully charge a battery in the SAC3600-KIT?
A: Charge time varies by battery capacity and Zebra device model. Consult your device's battery datasheet for typical charge durations; most Zebra mobile device batteries charge fully within 2–4 hours. The SAC3600-KIT delivers consistent charge current across all four slots simultaneously.
Q: Can I use the SAC3600-KIT with non-Zebra devices?
A: No. The SAC3600-KIT is designed exclusively for Zebra mobile computers and scanning devices using Zebra battery form factors. Third-party devices require different battery cradles and are not compatible.
Q: What happens if I plug in fewer than four devices?
A: The SAC3600-KIT operates normally with one, two, three, or four devices installed. Unused slots draw no power and do not affect charging performance for installed devices.
Q: Does the SAC3600-KIT work internationally?
A: The included power cord is USA-standard. If you operate outside North America, verify your facility voltage (typically 110–240V, 50–60 Hz) and obtain a compatible regional power cord separately. Contact Zebra support to confirm voltage compatibility.
Q: What is the warranty on the SAC3600-KIT?
A: Refer to Zebra's standard warranty terms for battery charging accessories. Warranty details vary by region and reseller; verify coverage with your authorized Zebra distributor at time of purchase.
Q: Can the SAC3600-KIT be mounted on a wall or cart?
A: The unit is designed as a stationary desktop/bench charger. It does not include built-in mounting hardware. Wall or cart mounting would require third-party brackets — verify dimensions and weight capacity before attempting custom installation.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Zebra SAC3600-KIT addresses a real pain point in mobile-device fleet management: the math of parallel charging. If you're running 20+ field units across a warehouse or field service operation, a single 4-slot charger eliminates device staging bottlenecks and ensures predictable shift-start availability. The SAC3600-KIT simplifies logistics by consolidating four independent chargers into one unit.
Technical Highlights:
- 4-Slot Parallel Architecture: All four battery slots charge simultaneously at consistent current, so you're not waiting for sequential single-device cycles. If your fleet rotates 25–30 devices per shift, this cuts idle time by roughly 75% compared to single-slot alternatives.
- Standard Form-Factor Battery Support: Works with any Zebra mobile device using Zebra's standard battery cradles. No proprietary adapters required, but compatibility depends entirely on your device mix — verify before deployment to avoid integration surprises.
- Mains-Powered Stability: Wired 110–240V operation (USA cord included) means no battery drain on the charger itself and stable, predictable charge cycles regardless of facility power fluctuations — important in warehouse environments with variable electrical loads.
Deployment Considerations:
- This is a stationary charger, not portable — position it at your shift-change area, dock, or service bay where device rotation happens. No built-in mounting; desktop/bench placement is the intended use case.
- Verify battery form-factor compatibility with your specific Zebra device models before ordering. Mixed device families (e.g., MC3300 vs. MC9300 vs. specialized scanning units) may use different cradle interfaces — mismatches mean unused slots.
- International deployment requires a regional power cord — the included USA cord works only on North American power infrastructure. Confirm voltage and frequency before shipping to remote locations.
The SAC3600-KIT is the right choice for centralized warehouse charging operations, field service depots, and logistics staging areas where you manage 15–50 Zebra mobile devices and need predictable device availability throughout the shift. Skip this if you're running fewer than 8–10 devices or require portable charging solutions.
