Zebra CRDCUP-W5X6-1DB-01 Scanner Cradle Cup
Overview
The Zebra CRDCUP-W5X6-1DB-01 is a dedicated cradle cup designed to charge and store a single WT54 or WT6400 series handheld scanner alongside one 600mAh battery. This wired accessory integrates into scanner cradle solutions and provides a consolidated docking point for device and battery management in warehouse, retail, and field service environments where multiple scanners require organized charging stations.
Key Features
- Single-Device / Single-Battery Capacity: Holds one WT54 or WT6400 handheld scanner and one 600mAh battery in a single cradle cup. This limits deployment to one-scanner-per-station setups — useful in retail checkouts or fixed workstations, but requires multiple cups for multi-scanner charging banks.
- Wired Connectivity: Cradle connects via wired interface to the host charging system. No wireless pairing required, eliminating Bluetooth pairing overhead and supporting consistent, always-on power delivery to both device and battery.
- WT54/WT6400 Compatibility: Purpose-built for Zebra's WT series handheld scanners. Verify your exact scanner model against the WT54 or WT6400 designation before purchase — this cup will not fit other Zebra scanner families (e.g., DS/MC series).
- Battery Charging Integration: Simultaneous charging of the paired 600mAh battery means a user picks up a scanner with a fully charged spare battery ready in the cup. Reduces device downtime in multi-shift operations.
- Compact Form Factor: Designed as a single-unit cup for point-of-use deployment — minimizes desk or counter footprint compared to multi-bay charging stations. Trades scalability for simplicity in low-density scanner environments.
Integration & Compatibility
The CRDCUP-W5X6-1DB-01 (often searched as CRDCUP W5X6 1DB 01) integrates seamlessly with existing Zebra WT54 and WT6400 infrastructure, including compatible charging docks and power management systems. Ensure your host system or cradle base supports this cup connector type before ordering — mismatched cradle-to-cup connections will prevent proper docking. If you are deploying a multi-bay charging solution or require support for mixed scanner models, consult your Zebra systems integrator or review the full Zebra scanner portfolio to confirm cup compatibility across your fleet.
Deployment Considerations
This cradle cup is suited for fixed charging stations in controlled environments (retail counters, warehouse offices, service hubs) where a single scanner and battery per station meet workflow requirements. High-volume, multi-user deployments requiring rapid battery swaps across many devices should evaluate larger multi-bay cradle systems. The wired connection limits portability — ensure adequate power routing to each cup location.
When to Choose a Different Model
If your deployment requires simultaneous charging of multiple scanners at one location, consider a multi-bay Zebra charging cradle or dock designed for 4–8 device capacity. If you need wireless charging or mobile charging carts, explore alternative Zebra accessories designed for multi-unit mobile charging. Consult your Zebra partner or integrator to confirm the right cradle configuration for your scanner fleet size and workflow density.
Frequently Asked Questions
Q: Is the CRDCUP-W5X6-1DB-01 compatible with WT41 or DS3678 scanners?
A: No. This cup is designed exclusively for WT54 and WT6400 series handheld scanners. Other Zebra scanner families require different cradle cups.
Q: Can I charge two scanners using one CRDCUP-W5X6-1DB-01 cup?
A: No. This cup holds one device and one 600mAh battery only. For multi-scanner charging, deploy multiple cups or specify a multi-bay Zebra cradle system.
Q: What power source does the CRDCUP-W5X6-1DB-01 require?
A: The cup connects via wired interface to a Zebra charging base or dock. Confirm your host charging system is compatible before ordering.
Q: Does this cradle cup support battery-only charging without the scanner?
A: This cup is designed for simultaneous device and battery charging. Check your host charging system or Zebra documentation for battery-only charging slots if required.
Q: Is a power supply included with the cradle cup?
A: No. The CRDCUP-W5X6-1DB-01 cradle cup itself is a passive accessory. Power is supplied by the host Zebra charging dock or base — verify inclusion when ordering the complete system.
Q: What is the warranty on the CRDCUP-W5X6-1DB-01?
A: Warranty details are not specified in the product documentation. Contact your Zebra partner or systems integrator for warranty coverage details.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The CRDCUP-W5X6-1DB-01 is a straightforward single-unit cradle cup, and that's its strength and its constraint. If your WT54 or WT6400 deployment lives in fixed workstations—retail registers, warehouse receiving desks, service hubs—this cup delivers organized, consolidated charging without the overhead of multi-bay infrastructure. The 600mAh battery charging slot is the real value: users grab a scanner with a fully charged spare ready to go, which cuts real downtime in high-traffic environments.
Technical Highlights:
- Single-Device / Single-Battery Design: One WT54 or WT6400 plus one 600mAh battery per cup keeps the footprint minimal and the charging logic simple—no complex multi-slot logic, just dock and charge.
- Wired Connectivity: Direct wired connection to the host charging base eliminates wireless pairing overhead and ensures consistent power delivery. No dropped connections, no re-pairing after scanner firmware updates.
- Purpose-Built Form Factor: Designed explicitly for WT series scanners. Verify model compatibility before deploying—a WT41 or DS3678 will not fit, and forcing a wrong scanner into the cup risks damage to the connector.
Deployment Considerations:
- This cup scales linearly: one scanner per station requires one cup. Multi-user environments or high-density scanning operations should calculate total cup count upfront, as deploying 20+ cups across a facility adds cost and management complexity.
- The wired interface requires proper power routing to each station. Ensure your host Zebra charging dock or base supports this cup connector type—mismatched interfaces will prevent docking and render the cup non-functional.
Deploy the CRDCUP-W5X6-1DB-01 in point-of-use charging scenarios—retail checkout lanes, warehouse sort stations, field service hubs—where one scanner per location and a spare battery meet the workflow demand. Not suitable for centralized multi-scanner charging pools or mobile charging carts.
