Zebra

SKU: P1061022-010

Zebra P1061022-010 Motherboard Repair Kit

OEM motherboard swap for Zebra thermal printers with serial, parallel, USB

• OEM drop-in replacement restores serial, parallel, and USB ports without reconfiguration.
• Ships with pre-installed firmware and boot ROM, eliminating post-install programming steps.
• Covered by a 1-year warranty, reducing risk on component-level printer fleet repairs.

Zebra

SKU: P1061022-017

Zebra P1061022-017 Dispenser Repair Kit

OEM dispenser repair kit for Zebra ZD500 thermal printers

• Genuine Zebra OEM components ensure drop-in fit and full compatibility with ZD500 printers.
• Targets dispenser mechanism wear directly, reducing unplanned downtime in high-volume label ops.
• 1-year warranty coverage supports planned maintenance budgets without capital equipment spend.

Zebra

SKU: P1061022-023

Zebra P1061022-023 ZD500 Flat Flex Cable Repair Kit

OEM flat flex cable repair kit for Zebra ZD500 thermal printers

• Genuine OEM part ensures verified fitment and reliable MLB connectivity for ZD500 printers.
• 1-year warranty covers the replacement, reducing total cost of unplanned maintenance events.
• Compatible with optional service parts (105934-038, P1027135-040) for broader repair scope.

Zebra

SKU: P1061022-029

Zebra P1061022-029 Control Panel Repair Kit

Genuine ZD500 control panel assembly with mounting hardware

• OEM part ensures exact ZD500 spec compliance with no firmware modification needed.
• Includes all panel components and mounting hardware for a complete single-kit repair.
• 1-year warranty covers the replacement assembly after installation.

Zebra

SKU: P1061022-030

Zebra P1061022-030 Repair Kit Core Adaptors

OEM 3-inch core adaptors for Zebra ZD500 series thermal printers

• Genuine OEM components eliminate compatibility risk versus third-party alternatives.
• 3-inch core adaptors integrate directly with ZD500 series media path mechanisms.
• 1-year warranty coverage supports planned maintenance and replacement cycles.

Zebra

SKU: P1063406-021

Zebra P1063406-021 Magnetic Stripe Reader Module

Magnetic stripe reader for Zebra ZQ510 mobile printers

• Extends ZQ510 mobile printers with wired magnetic stripe card reading capability.
• Supports payment processing and credential verification in field deployment scenarios.
• Module form factor installs directly on compatible ZQ510 hardware; backed by 1-year warranty.

Zebra

SKU: P1063406-025

Zebra P1063406-025 Media Disk Support Kit 12.5mm

12.5mm media disk support for Zebra ZQ500 mobile printers

• Engineered specifically for ZQ500 series mobile printers, ensuring drop-in fit.
• 12.5mm disk support maintains accurate media alignment for consistent receipt output.
• 1-year warranty backs reliable media handling in logistics and field deployments.

Zebra

SKU: P1063406-026

Zebra P1063406-026 Swivel Lock Adapter Kit for ZQ500

Swivel lock mount for ZQ500 series mobile printers

• Secures ZQ500 series mobile printers mechanically for stable field deployment.
• Swivel design enables quick printer repositioning without unmounting the unit.
• Includes mounting hardware; no firmware or driver updates required to install.

Zebra

SKU: P1063406-027

Zebra P1063406-027 4-Bay Power Station

4-bay charging station for mobile devices in logistics operations

• Charges four mobile devices simultaneously via wired connection for fast shift turnaround.
• Integrates with facility power infrastructure for organized, centralized device staging.
• One-year warranty supports deployment in distribution centers and logistics operations.

Zebra

SKU: P1063406-030

Zebra P1063406-030 Vehicle Power Supply 12-24V

Vehicle power for Zebra mobile computers; 12-24V from cigarette lighter

• Plugs into any standard cigarette lighter socket—no vehicle rewiring required.
• Regulated 12–24V output prevents brownout-induced reboots during continuous shifts.
• Wired connection ensures uninterrupted power to Zebra mobile computers all shift.

Zebra

SKU: P1063406-031

Zebra P1063406-031 Vehicle Power Supply Cigarette Lighter

Dual-voltage vehicle power for Zebra mobiles—12V to 24V in one SKU

• Vehicle 12-24V power supply with cigarette lighter plug
• Tool-free unplug for switching vehicles or devices
• 1.0 lb adapter at 5.0 x 6.0 x 3.0 in form factor

Zebra

SKU: P1063406-032

Zebra P1063406-032 Battery Eliminator Dummy Battery Pack

• Eliminates battery swaps by delivering continuous AC power to stationary deployments.
• Accepts 12–48V DC input, suiting diverse power infrastructure without extra converters.
• Wired connectivity ensures uninterrupted power during critical scanning and data collection.

Zebra

SKU: P1063406-034

Zebra P1063406-034 ZQ500 Vehicle Cradle Adapter

Vehicle cradle for Zebra ZQ500 mobile printers with wired mounting

• Secures ZQ500 mobile printers in vehicle mounts for reliable in-transit label printing.
• Wired connectivity ensures stable power delivery to the printer during fleet operations.
• 1-year warranty covers cradle hardware for logistics and field deployment use cases.

Zebra

SKU: P1063406-035

Zebra P1063406-035 Rugged Shoulder Strap with Metal Clips

Shoulder strap with metal clips for Zebra ZQ500 and P4T printers

• Metal clips provide positive mechanical engagement, eliminating velcro slippage over time.
• Hands-free shoulder carry supports simultaneous scanning and labeling during field ops.
• Compatible with Zebra ZQ500 and P4T series; no adapters or brackets required to install.

Zebra

SKU: P1063406-037

Zebra P1063406-037 Soft Carrying Case

Soft case for Zebra ZQ520 mobile printers in field operations

• Protects Zebra ZQ520 mobile printers during transport in rugged field deployments.
• Soft case design supports daily-use mobility across warehouse and logistics workflows.
• 1-year warranty coverage reduces accessory replacement risk in long-term deployments.

Zebra

SKU: P1063406-038

Zebra P1063406-038 ZQ510 Soft Case Kit

Soft protective case kit for Zebra ZQ510 mobile printers

• ZQ510 soft case kit accessory replacement
• Direct-fit for printer connectivity and mounting workflow
• 0.4 lb at 7.3 x 7.0 x 3.2 in form factor