Sub categories

Showing Results for Printer Accessories

Compare

Out of stock
Zebra

SKU: 105931-001

Zebra 105931-001 Printhead Kit

OEM Zebra printhead kit for direct thermal & thermal transfer
- Wired integration with warehouse, logistics, and POS labeling systems
- Manufacturer-authorized replacement for compatible Zebra thermal printers
- Maintains print quality across high-volume shipping and inventory labels
$188.14 $187.99 Save $0.15

Add to Cart
The item has been added
Free shipping over $499

$188.14 $187.99 Save $0.15

Add to quote Compare
Compare

Out of stock
Zebra

SKU: 105934-029

Zebra 105934-029 GK/GX420d Medium Duty Cutter

Medium-duty cutter for Zebra GK/GX420d 4-inch thermal printers
- Automated label separation for warehouse, retail, and logistics workflows
- Direct accessory port connection with native printer firmware compatibility
- Industrial-grade cutting module for moderate-volume production environments
$739.05 $572.99 Save $166.06

Add to Cart
The item has been added
Free shipping over $499

$739.05 $572.99 Save $166.06

Add to quote Compare
Compare

Out of stock
Zebra

SKU: 105934-033

Zebra 105934-033 GX420t/GX430t Medium Duty Cutter

Medium-duty automated cutter for Zebra GX420t/GX430t printers
- Eliminates manual label trimming with automated cutting for moderate-volume operations
- Integrates directly into GX420t and GX430t thermal transfer printer platforms
- Consistent cut quality across extended production runs in warehouse and logistics workflows
$675.44 $532.99 Save $142.45

Add to Cart
The item has been added
Free shipping over $499

$675.44 $532.99 Save $142.45

Add to quote Compare
Compare

Out of stock
Zebra

SKU: 105934-038

Zebra 105934-038 GK/GX420t Printhead 203dpi

Direct thermal printhead for Zebra GK/GX420t label printers, 203 dpi
- 203 dpi resolution for sharp barcodes and text on industrial labels
- Direct thermal technology eliminates ribbon or toner consumables
- Wired replacement part for GK420t and GX420t printer series
$180.04 $179.99 Save $0.05

Add to Cart
The item has been added
Free shipping over $499

$180.04 $179.99 Save $0.05

Add to quote Compare
Compare

Out of stock
Zebra

SKU: 105934-040

Zebra 105934-040 GK/GX420d Printhead Spring Clip

OEM printhead spring clip for Zebra GK420d and GX420d printers
- Maintains optimal printhead tension for consistent direct thermal print quality
- Fits GK420d and GX420d label and receipt printers; engineered to OEM specs
- Withstands repeated opening and closing cycles during maintenance intervals
$21.65 $16.99 Save $4.66

Add to Cart
The item has been added
Free shipping over $499

$21.65 $16.99 Save $4.66

Add to quote Compare
Compare

Out of stock
Zebra

SKU: 105934-053

Zebra 105934-053 GK420d/t 60W Power Supply

60W power supply for Zebra GK420d and GK420t label printers
- 60W regulated DC output with US and EU power cords included
- Desktop-mounted design for warehouse, logistics, and POS environments
- Direct compatibility with GK420d and GK420t thermal printer models
$157.79 $122.99 Save $34.80

Add to Cart
The item has been added
Free shipping over $499

$157.79 $122.99 Save $34.80

Add to quote Compare
Compare

Out of stock
Zebra

SKU: 105934-099

Zebra 105934-099 Platen Roller Bearings

Genuine OEM platen roller bearings for Zebra thermal printers
- Supports smooth label advancement and paper feed in thermal printers
- Genuine Zebra OEM part manufactured to original specifications
- Replacement bearings restore platen rotation and reduce feed errors
$14.89 $11.99 Save $2.90

Add to Cart
The item has been added
Free shipping over $499

$14.89 $11.99 Save $2.90

Add to quote Compare
Compare

Out of stock
Zebra

SKU: 105934-110

Zebra 105934-110 Medium Duty Partial Cutter Thermal Printer

Automated partial cutter for Zebra thermal printers, medium-duty high-volume
- Partial cut mechanism for tear-off labels without manual intervention between cycles
- Medium duty rated for moderate to high-volume warehouse, retail, and logistics printing
- Direct compatibility with standard Zebra cutter mounting on thermal printer platforms
$511.65 $403.99 Save $107.66

Add to Cart
The item has been added
Free shipping over $499

$511.65 $403.99 Save $107.66

Add to quote Compare
Compare

Add to Cart The item has been added
Zebra

SKU: 105950-035

Zebra 105950-035 Printhead Cleaning Pens 12-Pack

12-pack printhead cleaning pens for Zebra thermal printers
- Removes label dust, adhesive, and ink residue from printheads
- Compatible with Zebra desktop and mobile direct thermal printers
- 12 pens per pack for routine maintenance across multiple locations
$54.99

Add to Cart
The item has been added
Free shipping over $499

$54.99

Add to cart Add to quote Compare
Compare

Out of stock
Zebra

SKU: 105950-060

Zebra 105950-060 Power Supply Assembly Kit C5

C5 power supply for Zebra C-series printers, 100-240V universal input
- Includes C5 unit with US and EU power cords for North American and European use
- Universal 100-240V AC input eliminates need for region-specific power supplies
- Compatible with Zebra C-series thermal printers and enterprise thermal devices
$254.46 $200.99 Save $53.47

Add to Cart
The item has been added
Free shipping over $499

$254.46 $200.99 Save $53.47

Add to quote Compare
Compare

Out of stock
Zebra

SKU: 61331M

Zebra 61331M HC100 Platen Roller

OEM platen roller for Zebra HC100 thermal printers
- Engineered roller composition maintains consistent print quality in 24/7 operations
- Direct-fit replacement for HC100 series thermal printing systems
- Replace per manufacturer schedule or when visible wear appears on surface
$96.12 $74.99 Save $21.13

Add to Cart
The item has been added
Free shipping over $499

$96.12 $74.99 Save $21.13

Add to quote Compare
Compare

Out of stock
Zebra

SKU: 79803M

Zebra 79803M ZM600 Printhead 203dpi

OEM ZM600 printhead, 203 DPI, direct thermal & thermal transfer
- 203 DPI resolution for sharp barcodes and text on logistics labels
- Drop-in replacement for ZM600 series, no calibration or setup needed
- Dual printing technology support for direct thermal and transfer modes
$829.75 $654.99 Save $174.76

Add to Cart
The item has been added
Free shipping over $499

$829.75 $654.99 Save $174.76

Add to quote Compare
Compare

Out of stock
Zebra

SKU: 79804M

Zebra 79804M ZM600 Printhead 300dpi

OEM ZM600 printhead with 300dpi direct thermal for label production
- 300dpi resolution produces sharp, scannable barcodes for retail and logistics
- Drop-in replacement design installs without firmware updates or recalibration
- Direct thermal technology eliminates ribbon supplies on compatible ZM600 printers
$1,291.32 $1,018.99 Save $272.33

Add to Cart
The item has been added
Free shipping over $499

$1,291.32 $1,018.99 Save $272.33

Add to quote Compare
Compare

Out of stock
Zebra

SKU: P1018252

Zebra Cutter KIT UPG FOR 110XI4 Cutter KIT UPG FOR 110XI4 - P1018252
In stock · Ships same business day

$1,460.32 $1,151.99 Save $308.33

Add To Quote
Free shipping over $499

$1,460.32 $1,151.99 Save $308.33

Add to quote Compare
Compare

Out of stock
Zebra

SKU: P1018255

Zebra Cutter Upgrade KIT FOR 170XI4 Cutter Upgrade KIT FOR 170XI4 - P1018255
In stock · Ships same business day

$1,695.89 $1,337.99 Save $357.90

Add To Quote
Free shipping over $499

$1,695.89 $1,337.99 Save $357.90

Add to quote Compare
Compare

Out of stock
Zebra

SKU: P1038186

Zebra Enterprise Conn FOR Oracle - P1038186
In stock · Ships same business day

$9,600.00 $7,449.99 Save $2,150.01

Add To Quote
Free shipping over $499

$9,600.00 $7,449.99 Save $2,150.01

Add to quote Compare

Printer Accessories

Printer accessories keep thermal label printers in service across warehouse, industrial, and retail deployments. This category covers printheads, cutters, peelers, power supplies, cleaning supplies, and connectivity modules for the industrial and desktop printer fleet.

Plan Your Deployment

Printhead life in inches or meters printed, and replacement cost
Cutter type (rotary, guillotine) and throughput rating
Peeler and present options for applicator and pick-and-apply setups
Power supply voltage, amperage, and cord region for global deployments
Connectivity (Ethernet, wireless 802.11, Bluetooth, parallel) module fit

Label Printer Guide Get Recommendations

What to Look For

Stock printheads at 0.5 to 1 per production printer to protect throughput. Rotary cutters are the industrial workhorse; guillotine designs handle heavier stocks like tags. Verify that wireless modules match both your printer family and your network security requirements (WPA3, certificate-based auth) before you order.

Common Deployment Scenarios

Accessories are ordered during printer commissioning, as spare inventory for 24/7 lines, and during field-service calls to extend the life of existing hardware. A rolling budget of 5-10% of new printer capex covers most accessory replenishment plans.

What to Look For When Buying

The decisions that matter most before you spec.

Printhead Lifespan & Replacement Timing

Thermal print heads degrade after 5–8 million inches of travel; preventive replacement before failure prevents label batch loss. Check OEM head part numbers against your exact printer model—Honeywell and Sato heads are not interchangeable across product lines. Monitor print darkness drift and vertical streaks as early warning signs.

Power Supply Redundancy in 24/7 Operations

Warehouse and retail label printers running 16+ hours daily benefit from dual PSU configurations or hot-swappable modules to eliminate single-point failure. Verify voltage and amperage specs match your printer's draw—undersized supplies cause intermittent resets and print quality loss during peak demand.

Cleaning Protocol & Printhead Preservation

Weekly cleaning with OEM-approved isopropyl alcohol and lint-free swabs extends printhead life by 30–40% and prevents label adhesive buildup that causes print gaps. Do not use generic office wipes or water-based cleaners—they leave residue that accelerates head wear and voids manufacturer warranty.

Cutter & Peeler Maintenance in High-Volume Environments

Label-finishing modules (cutters, peelers) accumulate adhesive and dust and require replacement every 6–12 months depending on label stock and daily volume. Stock spare modules on-site to avoid multi-hour printer downtime during changeover in retail and warehouse deployments.

Connectivity Module Selection for System Integration

Verify that your chosen interface module (Ethernet, USB, or serial) matches your warehouse management or point-of-sale system's communication protocol. Legacy serial connections may require RJ-45-to-DB9 converters; modern Ethernet modules reduce setup time and improve network visibility for troubleshooting.

Supply Chain Planning for Seasonal Demand Spikes

Peak retail seasons (Q4, holiday) and year-end inventory cycles drive 30–50% surges in label printer utilization. Pre-position replacement printheads, cleaning kits, and cutters 8–12 weeks ahead to avoid stockouts and unplanned downtime when spare parts backlogs extend lead times across the industry.

Technology Stack

The specs and acronyms that actually affect printer accessories performance.

Thermal Print Resolution (DPI)

Measured in dots per inch—203 DPI covers standard retail and warehouse labels; 300 DPI enables smaller text and barcode density for compliance labels and pharmaceutical applications. Higher DPI components (printheads, platens) cost 15–25% more but are required for print-quality-dependent workflows.

Printhead Dot Count & Width

Industrial printers use 832-dot heads (4-inch wide labels); desktop/mobile printers use 384-dot or 576-dot heads for 2–3 inch widths. Matching dot architecture to your label format is critical—mismatched heads produce partial-line printing and alignment errors across the entire batch.

Print Speed (Inches Per Second, IPS)

Typical accessories support 2–12 IPS; faster heads and cutters incur higher electrical load and require larger power supplies. Verify PSU amperage when upgrading to high-speed modules to avoid voltage sag and thermal throttling during extended print runs.

Media Feed Mechanism & Ribbon Compatibility

Direct-thermal vs. thermal-transfer printing requires different feed guides and ribbon cartridges; mixing mechanisms causes label jams and ribbon shredding. Confirm your printer's media type before ordering replacement guides and cartridges.

Interface Protocol (RS-232, USB, Ethernet, 802.11ac)

Serial (RS-232) and USB modules suit standalone or legacy warehouse systems; Ethernet and Wi-Fi enable cloud-connected label printing and real-time queue management across multiple printers and locations. Modern modules also provide firmware update capability over IP.

Electrical Load & PoE Compatibility

Most thermal printers draw 5–15W at idle and 40–80W during active printing; inline PSUs and ribbon motors can spike to 120W. Standard office PoE switches (48W budget) cannot support full-speed label printers—dedicated power supplies or PoE+ switches (90W+) are required for reliable operation.

Typical Deployment Scenarios

Mid-Size Warehouse Label Printing Fleet (8–12 Printers)

Deploy Sato or Honeywell industrial printers at packing stations and receiving docks with shared cutter/peeler modules. Stock 4 spare printheads, 2 complete ribbon/media-guide kits, and 1 backup power supply per 4 printers. Implement monthly preventive cleaning to extend head life and reduce mid-shift failures during peak shipping windows.

Retail Point-of-Sale Label Printing (3–5 Desktop Printers)

Compact desktop printers at checkout and customer-service counters require Ethernet-connected interface modules for real-time inventory sync. Maintain on-site spares: 2 printheads, 1 cutter assembly, and 2 cleaning kits. Power supply redundancy is optional but recommended for stores with 10+ daily print-volume peaks.

High-Speed Parcel & Shipping Operation (20+ Printers)

Industrial units running 10+ IPS sustained require dedicated 120W+ power supplies and heavy-duty feed mechanisms rated for 10+ million label count lifecycles. Pre-position replacement printheads quarterly; schedule cutter/peeler swaps every 6 months. Implement predictive maintenance alerts tied to printhead dot-count diagnostics to prevent batch delays.

Hybrid Thermal & Barcode Labeling (Specialty Compliance)

Medical, pharmaceutical, or food-service environments using thermal-transfer printing with waterproof ribbon cartridges and 300+ DPI printheads. Require sealed ribbon-feed guides to prevent contaminant ingress and quarterly head alignment checks. Stock specialty ribbon spools and solvent-based cleaning supplies to meet industry compliance audits.

Frequently Asked Questions

How do I know which printhead to order for my thermal label printer?

Locate your exact printer model number on the device nameplate or in the system menu, then cross-reference the part number in the OEM datasheet. Honeywell and Sato printheads are model-specific and not interchangeable. If you are unsure, contact an expert with your printer model and we will confirm the correct part and lead time.

What is the typical lifespan of a thermal printhead, and when should I replace it?

Most OEM thermal print heads are rated for 5–8 million inches of label travel before dot failure becomes visible (loss of print darkness, vertical streaks, or missing dots). For a printer running 500 labels/day (500 inches/day), expect 27,000–43,000 days (~4–6 years) of operation. Monitor print quality monthly and replace proactively before customer-facing failures occur.

Can I use third-party or compatible printer accessories, or must I buy OEM parts?

OEM parts carry manufacturer warranty and are tested for your exact printer model. Compatible (aftermarket) alternatives are typically 20–30% cheaper but carry higher failure risk and may void extended service contracts. For mission-critical deployments (retail, shipping), OEM parts are strongly recommended; for lower-volume or secondary printers, compatible alternatives are acceptable if you stock spares.

How often should I clean my thermal printhead, and what supplies do I need?

Clean your printhead weekly for continuous-duty printers (16+ hours/day) and bi-weekly for standard 8-hour shifts. Use only OEM-approved isopropyl alcohol (90% or higher purity) with lint-free swabs or cleaning cards. Never use water, acetone, or generic office wipes—they leave residue and accelerate head wear. Budget one cleaning kit per printer per quarter.

What power supply do I need for my label printer, and can I use a generic USB-C adapter?

Check your printer's datasheet for rated voltage (12V, 24V, or 48V DC) and amperage draw. Most industrial printers require 40–80W during active printing; standard USB-C phone chargers (5–25W) are undersized and will cause resets, print quality loss, or thermal shutdown. Use the OEM power supply or a certified equivalent rated for your printer's peak draw plus 20% headroom.

Do I need to stock spare cutter and peeler modules, and how often do they need replacement?

Yes—cutter and peeler modules wear out faster than printheads due to repeated blade contact with label adhesive. Plan for replacement every 6–12 months depending on daily label volume and stock type. For warehouse and retail environments running 500+ labels/day, keep at least one spare cutter module on-site to minimize downtime during changeover.