Zebra · P1061022-006

Zebra P1061022-006 Gap/Black Line Sensor Repair Kit

Gap and black line sensor for ZD500 thermal label printers

• Restores accurate gap and black line detection, eliminating misaligned prints on ZD500 printers.
• OEM-specified components ensure seamless compatibility with ZD500 series without calibration guesswork.
• Wired integration connects directly to ZD500 electronics and ships with a 1-year warranty.

Zebra · P1061022-008

Zebra P1061022-008 Cutter Repair Kit for ZD500

Full 4-inch cutter assembly for Zebra ZD500 label printers

• Genuine Zebra OEM cutter assembly ensures ZD500 compatibility and fit.
• 4-inch full cutter replacement restores clean label separation at full width.
• Field-replaceable design allows technician installation without factory service.

Zebra · P1061022-010

Zebra P1061022-010 Motherboard Repair Kit

OEM motherboard swap for Zebra thermal printers with serial, parallel, USB

• OEM drop-in replacement restores serial, parallel, and USB ports without reconfiguration.
• Ships with pre-installed firmware and boot ROM, eliminating post-install programming steps.
• Covered by a 1-year warranty, reducing risk on component-level printer fleet repairs.

Zebra · P1061022-017

Zebra P1061022-017 Dispenser Repair Kit

OEM dispenser repair kit for Zebra ZD500 thermal printers

• Genuine Zebra OEM components ensure drop-in fit and full compatibility with ZD500 printers.
• Targets dispenser mechanism wear directly, reducing unplanned downtime in high-volume label ops.
• 1-year warranty coverage supports planned maintenance budgets without capital equipment spend.

Zebra · P1061022-023

Zebra P1061022-023 ZD500 Flat Flex Cable Repair Kit

OEM flat flex cable repair kit for Zebra ZD500 thermal printers

• Genuine OEM part ensures verified fitment and reliable MLB connectivity for ZD500 printers.
• 1-year warranty covers the replacement, reducing total cost of unplanned maintenance events.
• Compatible with optional service parts (105934-038, P1027135-040) for broader repair scope.

Zebra · P1061022-029

Zebra P1061022-029 Control Panel Repair Kit

Genuine ZD500 control panel assembly with mounting hardware

• OEM part ensures exact ZD500 spec compliance with no firmware modification needed.
• Includes all panel components and mounting hardware for a complete single-kit repair.
• 1-year warranty covers the replacement assembly after installation.

Zebra · P1061022-030

Zebra P1061022-030 Repair Kit Core Adaptors

OEM 3-inch core adaptors for Zebra ZD500 series thermal printers

• Genuine OEM components eliminate compatibility risk versus third-party alternatives.
• 3-inch core adaptors integrate directly with ZD500 series media path mechanisms.
• 1-year warranty coverage supports planned maintenance and replacement cycles.

Zebra · P1063406-021

Zebra P1063406-021 Magnetic Stripe Reader Module

Magnetic stripe reader for Zebra ZQ510 mobile printers

• Extends ZQ510 mobile printers with wired magnetic stripe card reading capability.
• Supports payment processing and credential verification in field deployment scenarios.
• Module form factor installs directly on compatible ZQ510 hardware; backed by 1-year warranty.

Zebra · P1063406-025

Zebra P1063406-025 Media Disk Support Kit 12.5mm

12.5mm media disk support for Zebra ZQ500 mobile printers

• Engineered specifically for ZQ500 series mobile printers, ensuring drop-in fit.
• 12.5mm disk support maintains accurate media alignment for consistent receipt output.
• 1-year warranty backs reliable media handling in logistics and field deployments.

Zebra · P1063406-026

Zebra P1063406-026 Swivel Lock Adapter Kit for ZQ500

Swivel lock mount for ZQ500 series mobile printers

• Secures ZQ500 series mobile printers mechanically for stable field deployment.
• Swivel design enables quick printer repositioning without unmounting the unit.
• Includes mounting hardware; no firmware or driver updates required to install.

Zebra · P1063406-027

Zebra P1063406-027 4-Bay Power Station

4-bay charging station for mobile devices in logistics operations

• Charges four mobile devices simultaneously via wired connection for fast shift turnaround.
• Integrates with facility power infrastructure for organized, centralized device staging.
• One-year warranty supports deployment in distribution centers and logistics operations.

Zebra · P1063406-030

Zebra P1063406-030 Vehicle Power Supply 12-24V

Vehicle power for Zebra mobile computers; 12-24V from cigarette lighter

• Plugs into any standard cigarette lighter socket—no vehicle rewiring required.
• Regulated 12–24V output prevents brownout-induced reboots during continuous shifts.
• Wired connection ensures uninterrupted power to Zebra mobile computers all shift.

Zebra · P1063406-031

Zebra P1063406-031 Vehicle Power Supply Cigarette Lighter

Dual-voltage vehicle power for Zebra mobiles—12V to 24V in one SKU

• Vehicle 12-24V power supply with cigarette lighter plug
• Tool-free unplug for switching vehicles or devices
• 1.0 lb adapter at 5.0 x 6.0 x 3.0 in form factor

Zebra · P1063406-032

Zebra P1063406-032 Battery Eliminator Dummy Battery Pack

• Eliminates battery swaps by delivering continuous AC power to stationary deployments.
• Accepts 12–48V DC input, suiting diverse power infrastructure without extra converters.
• Wired connectivity ensures uninterrupted power during critical scanning and data collection.

Zebra · P1063406-034

Zebra P1063406-034 ZQ500 Vehicle Cradle Adapter

Vehicle cradle for Zebra ZQ500 mobile printers with wired mounting

• Secures ZQ500 mobile printers in vehicle mounts for reliable in-transit label printing.
• Wired connectivity ensures stable power delivery to the printer during fleet operations.
• 1-year warranty covers cradle hardware for logistics and field deployment use cases.

Zebra · P1063406-035

Zebra P1063406-035 Rugged Shoulder Strap with Metal Clips

Shoulder strap with metal clips for Zebra ZQ500 and P4T printers

• Metal clips provide positive mechanical engagement, eliminating velcro slippage over time.
• Hands-free shoulder carry supports simultaneous scanning and labeling during field ops.
• Compatible with Zebra ZQ500 and P4T series; no adapters or brackets required to install.

Zebra · P1063406-037

Zebra P1063406-037 Soft Carrying Case

Soft case for Zebra ZQ520 mobile printers in field operations

• Protects Zebra ZQ520 mobile printers during transport in rugged field deployments.
• Soft case design supports daily-use mobility across warehouse and logistics workflows.
• 1-year warranty coverage reduces accessory replacement risk in long-term deployments.

Zebra · P1063406-038

Zebra P1063406-038 ZQ510 Soft Case Kit

Soft protective case kit for Zebra ZQ510 mobile printers

• ZQ510 soft case kit accessory replacement
• Direct-fit for printer connectivity and mounting workflow
• 0.4 lb at 7.3 x 7.0 x 3.2 in form factor

Zebra · P1063406-039

Zebra P1063406-039 ZQ500 2-Roll Media Storage Case

2-roll media storage case for Zebra ZQ500 portable thermal printers

• Stores two thermal media rolls securely, reducing downtime during extended field deployments.
• Purpose-built for ZQ500 series printers, ensuring a precise fit across the full ZQ51/ZQ52 lineup.
• Dedicated case protects receipt media in logistics and warehouse mobility workflows.

Zebra · P1063406-040

Zebra P1063406-040 Belt Clip 5-Pack for ZQ510/ZQ520

OEM belt clips for Zebra ZQ510/ZQ520 mobile printers, 5-pack

• OEM Zebra clip ensures exact fit on ZQ510/ZQ520 mounting points—no tools required.
• 5-pack format supports multi-unit deployments and covers spare inventory in one order.
• 1-year warranty backs clips against wear in active field and warehouse environments.

Zebra · P1063406-041

Zebra P1063406-041 ZQ500 D-Ring Adapter Belt Attachment

D-ring belt attachment for Zebra ZQ500 mobile printers

• Wired interface locks the ZQ500 securely in place, preventing accidental disconnection.
• Compatible with standard 1.5–2 inch belts and harnesses, simplifying deployment.
• Hands-free waist-level mounting keeps both hands free for scanning or label tasks.

Zebra · P1063406-042

Zebra P1063406-042 ZQ500 RAM Arm Mounting Plate

RAM arm mounting plate for Zebra ZQ500 mobile printers

• Mounts ZQ500 mobile printers to standard RAM arm systems without custom fabrication.
• Mechanical attachment keeps printer power and communications fully independent of the mount.
• 1-year warranty coverage supports deployment in vehicle, warehouse, and workstation environments.

Zebra · P1063406-043

Zebra P1063406-043 ZQ510 Exoskeleton Shoulder Strap

Hands-free shoulder strap for ZQ510 mobile printers in field operations

• Mounts directly to ZQ510 exoskeleton hardpoints—no tools, no adapters required.
• Passive mechanical design adds zero battery drain or wireless overhead to the printer.
• Shoulder carry frees both hands for scanning and data entry during extended shifts.

Zebra · P1063406-044

Zebra P1063406-044 ZQ520 Exoskeleton Printer Protection Case

Rugged exoskeleton case for Zebra ZQ520 mobile printers

• Exoskeleton shell absorbs impact and abrasion, protecting ZQ520 units in field ops.
• Integrated shoulder strap enables hands-free carry for warehouse and logistics deployments.
• Designed exclusively for ZQ520 series, ensuring seamless fit with existing Zebra infrastructure.

Zebra · P1063406-045

Zebra P1063406-045 USB Cable with Twist Lock

6ft USB cable with twist-lock for Zebra ZQ500 mobile printers

• Twist-lock connector prevents accidental disconnection in high-vibration warehouse deployments.
• 6 ft (1.8 m) length accommodates vehicle mounts and multi-station dock setups without cable snarl.
• USB Type A to 5-pin Micro-USB Type B topology connects ZQ500 printers to standard host ports.

Zebra · P1063406-047

Zebra P1063406-047 USB Micro A/B to USB A Converter Cable

USB Micro A/B to USB-A cable for Zebra ZQ500 mobile printers

• 1.83 m (6 ft) cable length provides practical reach for bench or dock deployments.
• USB Micro A/B to USB-A connector bridges ZQ500 mobile printers to standard host ports.
• 1-year warranty backs field use in logistics, warehouse, and point-of-sale environments.

Zebra · P1063406-049

Zebra P1063406-049 USB Type-A to Serial DB9 Cable

USB Type-A to Serial DB9 cable for Zebra ZQ500 mobile printers

• Bridges USB Type-A hosts to legacy Serial DB9 devices without additional adapters.
• Purpose-built for Zebra ZQ500 mobile printers, ensuring validated compatibility.
• 1-year warranty supports deployment in warehouse, logistics, and field service environments.

Zebra · P1063406-061

Zebra P1063406-061 Battery Eliminator Cradle USB Kit

USB-powered docking cradle for Zebra ZQ5 with integrated lock

• Eliminates battery swaps by delivering continuous USB power to docked ZQ5 units.
• Integrated lock prevents accidental disconnection in high-vibration dock environments.
• Compact cradle form factor drops into existing workstation layouts without reconfiguration.

Zebra · P1063406-062

Zebra P1063406-062 ZQ500 Vehicle Cradle with USB Lock

Secure ZQ500 printer cradle with USB lock for vehicles

• Integrated USB lock prevents mid-route disconnection over vibration or rough terrain.
• Fits ZQ500 series printers natively — no adapters, no modification, mount once and trust the fit.
• Vehicle-mount design supports dashboard, windshield, or console positions for flexible deployment.

Zebra · P1063406-133

Zebra P1063406-133 Car Power Adapter Battery Eliminator Kit

12V car power adapter eliminates battery drain during vehicle operations

• Cigarette lighter input powers Zebra mobile devices from any 12V vehicle port.
• Battery eliminator module sustains full device operation without battery drain.
• Kit includes adapter, eliminator module, and connector assembly; 1-year warranty.

Zebra · P1063406-146

Zebra P1063406-146 USB Micro-B Cable 11.5ft

USB Micro-B cable, 11.5 feet, for Zebra mobile computers

• USB-A to Micro-USB Type B wiring suits dock stations and charging bay deployments.
• 11.5 ft (3.5 m) reach eliminates short-cable strain in warehouse and POS installations.
• 1-year warranty backs reliable data sync and charging for Zebra ZQ500 mobile computers.

Zebra · P1063997-001

Zebra P1063997-001 14-Pin Connector Cable Assembly Kit

14-pin wired connector kit for Zebra POS and mobile devices

• 14-pin wired interface delivers stable power and data without wireless dependency.
• Cable form factor simplifies direct integration with compatible Zebra POS and mobile hardware.
• 1-year warranty provides defined coverage for deployment lifecycle planning.

Zebra · P1064132

Zebra P1064132 ZBI 2.0 Activation Key Mobile Computer

ZBI 2.0 activation key designed to enable advanced functionality on compatible Zebra mobile computers

• Unlocks ZBI 2.0 middleware on compatible Zebra mobile computers for streamlined deployment.
• Delivered via email for immediate activation—no waiting on physical media or shipment.
• Single-device license supports Wi-Fi-connected Zebra units with 2D scan engine capability.

Zebra · P1065668-008

Zebra P1065668-008 AC Adapter Kit for QLn Printers

30W AC adapter kit for Zebra QLn mobile printers, 110–240V global

• 30W output sustains QLn printers at full capacity, preventing brownout during print runs.
• 110–240V auto-ranging input supports global deployment without region-specific adapter variants.
• Integrated straight-connector cable eliminates field assembly and reduces port disconnection risk.

Zebra · P1065668-021

Zebra P1065668-021 QLn/ZQ6 HC 61" Shoulder Strap

61" shoulder strap for Zebra QLn and ZQ6 HC mobile printers

• 61-inch adjustable strap enables hands-free printer carry during active warehouse ops.
• Compatible with Zebra QLn Series and ZQ6 HC printers via standard attachment points.
• 1-year warranty covers the accessory for sustained field and logistics deployments.

Zebra · P1066329-001

Zebra P1066329-001 Media Bracing Disk Kit

Media bracing disk kit for precise roll and label alignment

• Maintains precise roll and label alignment to reduce misprints during print runs.
• Includes both media bracing disk and guide, delivering a complete installation kit.
• Backed by a 1-year warranty, supporting reliable deployment in industrial workflows.