Accessories
Showing Results for Accessories
-
i-PRO
SKU: 102-RX00
i-PRO M90 Receiver - 102-RX00
- Extends i-PRO M90-series wireless camera deployments via RF-to-network conversion.
- Connects to NVR or VMS over Ethernet, with PoE support for simplified cabling.
- Integrates at the network layer with ONVIF or native i-PRO protocol on your VMS.
$260.00 $247.99 Save $12.01The item has been added -
i-PRO
SKU: MC-MR50-S3
i-PRO MC-MR50-S3 Controller: THE High-performance MC-MR50
- Runs on PoE+ (802.3at), eliminating dedicated power supplies at each door controller.
- Integrates natively with Video Insight 7, correlating door events with camera footage automatically.
- No per-user licensing fees; unlimited concurrent browser-based connections included.
$626.50 $379.99 Save $246.51The item has been added -
i-PRO
SKU: WVCW334S
i-PRO Outdoor Vandal-resistant Fixed Dome Anal - WVCW334S
- Vandal-resistant dome enclosure handles deliberate impact in high-traffic exterior zones.
- ONVIF Profile S/T/G support enables direct integration with Milestone, Genetec, and neutral VMS.
- PoE-powered with ceiling/wall mount options, simplifying conduit and power runs at deployment.
$425.00 $334.99 Save $90.01The item has been added -
i-PRO
SKU: IPS-WS-RED-T1-STD
I-pro Redaction Tower Workstation FOR A - IPS-WS-RED-T1-STD
- Dedicated tower workstation purpose-built for forensic video redaction workflows.
- Integrates with i-PRO VMS and ONVIF-compliant NVR systems without added licensing.
- PoE connectivity simplifies deployment within existing surveillance network infrastructure.
$5,430.00 $4,666.99 Save $763.01The item has been added -
i-PRO
SKU: WVCU650
i-PRO System Controller F/ WJ-HD300 WJ-HD500 - WVCU650
- Controls WJ-HD300 and WJ-HD500 recorders via RS-485 in PS·Data or Terminal mode.
- PS·Data mode supports up to 4 networked controllers, 99 units, and 999 cameras.
- Runs on 100–240 V AC input and operates reliably from −10°C to +50°C.
$1,523.00 $1,196.99 Save $326.01The item has been added -
i-PRO
SKU: MC-TM400K1MC
i-PRO TM400K1MC ; (fuse Protected Output Version) - MC-TM400K1MC
- Per-output fuse protection isolates faults, preventing a single short from taking down the entire branch.
- Delivers 12VDC/24VAC selectable at 6A/150W from a 115VAC input, supporting mixed device loads.
- NDAA-compliant enclosed cabinet mounts in standard electrical panels across -20°C to +49°C environments.
$789.49 $543.99 Save $245.50The item has been added -
i-PRO
SKU: TRTN-UA
I-Pro Trtn-Ua Triton Ultra Sensor
- Offloads people counting and traffic analysis from camera CPU via external module.
- Powers over 802.3af PoE—no separate supply needed, conserves switch power budget.
- Microphone input enables audio-visual incident logging on compatible i-PRO systems.
$1,698.86 $1,147.99 Save $550.87The item has been added -
i-PRO
SKU: WV-CW634F
i-PRO WV-CW634F Super Dynamic 6 Vandal-Resistant Fixed Camera
- 700 TVL resolution with Super Dynamic 6 delivers usable detail in mixed lighting.
- IP66-rated dome withstands spray-down cleaning and physical tampering in harsh sites.
- Varifocal 3.8–8.0 mm CS-mount lens allows focal adjustment on-site without hardware swaps.
$519.00 $407.99 Save $111.01The item has been added -
i-PRO
SKU: WV-CW634S
i-PRO WV-CW634S Super Dynamic 6 Vandal-Resistant Camera
- 700 TVL / 976-pixel CCD resolves fine detail for evidence-grade footage.
- IP66-rated dome withstands dust ingress and high-pressure wash-down cycles.
- 0.008 lux B/W sensitivity enables 24-hour coverage without auxiliary lighting.
$533.00 $418.99 Save $114.01The item has been added -
i-PRO
SKU: WVCS584
i-PRO WVCS584 Super Dynamic 6 650 TVL Analog Camera
- Super Dynamic 6 WDR (128×–160× range) eliminates iris adjustments in mixed-light scenes.
- 36× optical zoom with 256 presets and 400°/s pan speed reduces camera count on large sites.
- Coaxial-native 650 TVL output integrates directly with existing DVRs and Pelco P/D systems.
$2,082.00 $1,636.99 Save $445.01The item has been added -
i-PRO
SKU: WVCU950
i-PRO WVCU950 Ethernet System Controller
- Rack-mount chassis (11.42"W × 4.37"H × 8.7"D) fits standard 19" equipment racks.
- Ethernet connectivity enables centralized control of i-PRO networked cameras from one chassis.
- Runs on supplied 120 V AC / 60 Hz adapter—no specialized power distribution required.
$2,883.00 $2,265.99 Save $617.01The item has been added -
Janam
SKU: ATC-HT1-1
Janam 2D Imager Attachment For HT1 Series - ATC-HT1-1
- 2D imager attachment for Janam HT1 Series mobile computers
- Adds barcode and 2D imaging to existing HT1 fleet
- Modular upgrade — extends device life without replacement
$350.00 $262.99 Save $87.01The item has been added -
Janam
SKU: PK-T2-002
Janam AC/DC Power Supply For XT2 Series Cradle - PK-T2-002
- AC/DC power supply for Janam XT2 Series cradle — 5V at 4A
- Powers docked XT2 device plus charges its battery
- Replaces lost or damaged cradle power adapters
$50.00 $49.99 Save $0.01The item has been added -
Janam
SKU: ATC-XT-01
Janam Active Epop-Loq Mount For XT30/XT40 Series - ATC-XT-01
- Active Epop-Loq mount for XT30 and XT40 mobile computers
- Secures device in fixed or vehicle-mounted positions
- Powered dock for charging while mounted in place
$155.00 $154.99 Save $0.01The item has been added -
Janam
SKU: BK-T2-003
Janam Extended Battery Kit For XT2 Series (Includes - BK-T2-003
- Extended battery kit for XT2 — 4,000 mAh 3.7V cell
- Adds runtime to XT2 handhelds for longer field shifts
- Non-NFC variant for cost-conscious deployments
$110.00 $109.99 Save $0.01The item has been added -
Janam
SKU: BK-T2-004
Janam Extended Battery Kit For XT2 Series (Includes - BK-T2-004
- Extended 4,000 mAh battery kit for Janam XT2 Series
- Longer shift runtime for warehouse and field operations
- Direct OEM fit on rugged XT2 mobile computers
$120.00 $119.99 Save $0.01The item has been added
Accessories
Warehouse data capture accessories support the daily operation of barcode scanners, mobile computers, RFID readers, and industrial label printers. From charging docks and batteries to mounting systems and communication cables, these components ensure reliable performance across high-volume warehouse and distribution environments.
Deployment Considerations
- Charging infrastructure for multi-shift operations
- Spare battery planning for uninterrupted workflows
- Vehicle mounts and workstation docks
- Connectivity cables and interface modules
- Device protection and environmental durability