Lifesafety Power

SKU: FPO75/150-2C8P2D8PE4M1

Lifesafety Power FPO75/150-2C8P2D8PE4M1 FPO75/150-2C8P2D8PE4M1

• Redundant dual-channel architecture eliminates single points of failure in critical deployments.
• 75W primary / 150W combined output supports parallel load-balancing across multiple device zones.
• Eight isolated power circuits across 2 distribution boards enable flexible per-zone circuit assignment.

Lifesafety Power

SKU: FPO75/150-C4C82D8PE4M1

Lifesafety Power FPO75/150-C4C82D8PE4M1 16 Door

• Supports up to 16 doors from a single 12V DC power distribution module.
• Consolidates lock, reader, and ancillary device power to reduce panel clutter.
• Fits small-to-mid-sized access control installs with room for moderate expansion.

Lifesafety Power

SKU: FPO75/150-C4C82D8PE8M1

Lifesafety Power FPO75/150-C4C82D8PE8M1 FPO75/150-C4C82D8PE8M1

• 75W redundant output eliminates single points of failure in camera and access control systems.
• Automatic switchover between dual AC inputs requires no manual intervention or system restart.
• Configuration code C4C82D8PE8M1 defines output voltage, terminal layout, and supervision protocol.

Lifesafety Power

SKU: FPO75/150-C4PD8PE1

Lifesafety Power FPO75/150-C4PD8PE1 FPO75/150-C4PD8PE1

• Dual independent output rails isolate loads, preventing a single fault from dropping all circuits.
• Redundant architecture supports 99.5%+ uptime deployments for NVRs, access panels, and alarms.
• Separate circuit inputs allow phase or UPS isolation, maximizing protection against power events.

Lifesafety Power

SKU: FPO75/150-C4PD8PE2

Lifesafety Power FPO75/150-C4PD8PE2 FPO75/150-C4PD8PE2

Lifesafety Power

SKU: FPO75/150-C8D8E2

Lifesafety Power FPO75/150-C8D8E2 FPO75/150-C8D8E2

• Delivers 75W at 12V or 150W at 24V to match your downstream device requirements.
• Eight fused 3A auxiliary outputs distribute power to multiple locks or control boards.
• Compact E2 enclosure mounts in server rooms, electrical closets, or equipment racks.

Lifesafety Power

SKU: FPO75/150-C8D8E4

Lifesafety Power FPO75/150-C8D8E4 FPO75/150-C8D8E4

• Dual-output design powers multiple security devices from a single field-installed unit.
• Centralized power supervision simplifies monitoring of cameras, readers, and alarm loads.
• Standard hand-tool installation reduces deployment time in warehouse and enterprise sites.

Lifesafety Power

SKU: FPO75/150-C8D8E4A

Lifesafety Power FPO75/150-C8D8E4A FPO75/150-C8D8E4A

• 225W total output powers simultaneous 12V and 24V rails for multi-door deployments.
• 8 onboard DIN relay modules control up to 8 independent door strike or lock zones.
• Steel E4A enclosure (24×20×4.5 in) supports surface-mount or 19-inch rack integration.

Lifesafety Power

SKU: FPO75/150-C8D8E4S

Lifesafety Power FPO75/150-C8D8E4S FPO75/150-C8D8E4S

• Delivers 225W total across dual 12V and 24V outputs from a single enclosure.
• E4S form factor (24×20×4.5 in) mounts to 19-inch racks or wall surfaces.
• Supports mixed-voltage loads — IP cameras on 12V, access readers on 24V.

Lifesafety Power

SKU: FPO75/150-C8D8PE4M1

Lifesafety Power FPO75/150-C8D8PE4M1 8 Door

• Provisions and supervises 8 door circuits from a single centralized unit.
• Integrated circuit supervision detects open, short, and tamper faults per door.
• Battery backup eliminates the need for separate UPS units at each door location.

Lifesafety Power

SKU: FPO75/150-C8D8PE8M

Lifesafety Power FPO75/150-C8D8PE8M 8 Door

• 8 independent output channels isolate door lock and reader circuits across up to 8 access points.
• Centralized regulated DC power reduces field wiring complexity in warehouses and office deployments.
• Battery power support maintains lock and reader operation during primary power interruptions.

Lifesafety Power

SKU: FPO75/150-C8PD8PE2

Lifesafety Power FPO75/150-C8PD8PE2 8 lock 8 auxiliary outputs cl

• Supplies 8 dedicated lock outputs and 8 auxiliary outputs from one enclosure.
• Dual-rated 75W/150W lets you scale multi-door deployments without swapping hardware.
• Class 2 limited outputs at 2.5A each; no per-circuit overcurrent protection required.

Lifesafety Power

SKU: FPO75/150-C8PD8PE4

Lifesafety Power FPO75/150-C8PD8PE4 Preconfigured single and dual

• Ships preconfigured, eliminating field setup time and reducing commissioning complexity.
• Supports mixed single and dual voltage circuits for cameras and access control from one unit.
• Fixed preconfiguration suits small-to-mid-scale deployments; verify specs before ordering.

Lifesafety Power

SKU: FPO75/150-C8PD8PE4M

Lifesafety Power FPO75/150-C8PD8PE4M FPO75/150-C8PD8PE4M

• Dual-channel design powers 12VDC and 24VDC devices from a single enclosure.
• DIN-rail mount simplifies integration into existing security control panels.
• Separate output rails prevent cross-voltage damage to mixed downstream devices.

Lifesafety Power

SKU: FPO75/150-C8PD8PE4M1

Lifesafety Power FPO75/150-C8PD8PE4M1 FPO75/150-C8PD8PE4M1

• 225W modular enclosure centralizes 12V/24V distribution across multi-zone access systems.
• Eight relay-driven outputs independently feed door locks, strikes, or Class 2 signaling devices.
• Class 2 power-limited outputs simplify code compliance for downstream access-control devices.

Lifesafety Power

SKU: FPO75/150-C8PD8PE4S

Lifesafety Power FPO75/150-C8PD8PE4S 8DR SWH Pro specific 12V &

• 225W dual-output supply powers both 12V and 24V readers from a single unit.
• E4S enclosure (24H × 20W × 4.5D in.) fits standard 19-inch rack or wall cabinet.
• Purpose-built for 8DR SWH Pro platforms, eliminating daisy-chained power units.