Lifesafety Power

SKU: FPO75-B100C8D8E2-3SL1

Lifesafety Power FPO75-B100C8D8E2-3SL1 6DR Dv E2 75W 8 Lock and 8

• Dual 12VDC/24VDC outputs support mixed-voltage readers and maglocks on one supply.
• 8 lock supervision channels enable real-time electromagnetic lock status monitoring.
• 3 included Salto mounting plates accelerate commissioning on multi-door Salto deployments.

Lifesafety Power

SKU: FPO75-B100C8D8E2M

Lifesafety Power FPO75-B100C8D8E2M 75W Dual Voltage 120 VAC 8 Re

• 75W dual-voltage output supports mixed 12VDC/24VDC loads across multi-zone deployments.
• Eight relay outputs switch door strikes and mag-locks from a single centralized supply.
• Eight auxiliary outputs connect sensors and indicators without additional distribution hardware.

Lifesafety Power

SKU: FPO75-B100D8E4P

Lifesafety Power FPO75-B100D8E4P FPO75-B100D8E4P

• 75W regulated output supports multi-device loads without cascading power loss.
• Filtered DC output reduces noise-induced jitter in video and prevents reader resets.
• Cabinet or wall-mount design suits controlled-environment installs in access control racks.

Lifesafety Power

SKU: FPO75-B100E1

Lifesafety Power FPO75-B100E1 Dvps Fpo/B100 Combination Up To A 2

• Dual-rail 12V and 24V DC outputs eliminate separate supply runs in mixed systems.
• 75W total capacity supports up to 2A per rail for concurrent multi-device loads.
• E1 enclosure suits flush or panel mounting in racks, closets, or wall installs.

Lifesafety Power

SKU: FPO75-B100E1M

Lifesafety Power FPO75-B100E1M FPO75-B100E1M

• Delivers 75W of regulated DC output to keep cameras, switches, and controllers stable.
• Designed for commercial and industrial security deployments requiring clean, protected power.
• Mount in a ventilated enclosure; verify load budget and wire gauge before installation.

Lifesafety Power

SKU: FPO75-C4D8PE2M

Lifesafety Power FPO75-C4D8PE2M 75W Single Voltage 120 VAC 4 Rel

• 75W single-voltage supply consolidates power for multi-door access control deployments.
• 4 relay outputs switch mag locks, door strikes, or auxiliary devices from one unit.
• 8 auxiliary outputs support readers, sensors, and indicators on 120 VAC mains input.

Lifesafety Power

SKU: FPO75-C4D8PE4M

Lifesafety Power FPO75-C4D8PE4M 75W Single Voltage 120 VAC 4 Rel

• 75W 24VDC output powers electric strikes, mag locks, and auxiliary sensors.
• 4 dry-contact relay outputs (NO/NC) enable independent zone switching per lock.
• 8 auxiliary circuits allow separate device groups without an added control layer.

Lifesafety Power

SKU: FPO75-C4D8PE4M/T4-A

Lifesafety Power FPO75-C4D8PE4M/T4-A FPO75-C4D8PE4M/T4-A

Lifesafety Power

SKU: FPO75-C4E1-DM2

Lifesafety Power FPO75-C4E1-DM2 75W Single Voltage 120 VAC 4 Rel

• 75W regulated output powers mag locks, strikes, and REX devices across 4 doors.
• Four individually supervised relay outputs prevent cross-load faults in multi-door deployments.
• 120VAC hardwired input suits dedicated-circuit electrical closet installations.

Lifesafety Power

SKU: FPO75-C4E1M

Lifesafety Power FPO75-C4E1M FPO75-C4E1M

• Four independent supervised outputs isolate faults without disrupting remaining circuits.
• 75W capacity delivers regulated 12VDC or 24VDC across mixed access control and camera loads.
• Integrated battery backup supports continuity during brief outages on 120 VAC input systems.

Lifesafety Power

SKU: FPO75-C4PE1

Lifesafety Power FPO75-C4PE1 FPO75-C4PE1

• Four independent 2.5A Class 2 outputs let you supervise one lock circuit per door.
• Selectable 12VDC/6A or 24VDC/3A output suits most electric strike and mag-lock loads.
• NEMA 1 E1 enclosure mounts directly in control rooms or secure equipment cabinets.

Lifesafety Power

SKU: FPO75-C4PE2M

Lifesafety Power FPO75-C4PE2M QUICK GUIDE Mercury Backplat

• Consolidates wiring diagrams and specs to accelerate Mercury Backplate deployments.
• Covers voltage, amperage, battery backup, and supervision signaling in one reference.
• Keep on-site for faster troubleshooting of Lifesafety Power access control systems.

Lifesafety Power

SKU: FPO75-C8D8E1

Lifesafety Power FPO75-C8D8E1 8 Lock 8 Auxiliary Outputs Fused

• Eight independently fused 3A auxiliary outputs prevent a single fault from dropping the panel.
• Supports 12VDC or 24VDC topologies, covering standard strikes, mag locks, and card readers.
• 75W cabinet-mount form factor fits single-building or multi-zone access control deployments.

Lifesafety Power

SKU: FPO75-C8E2

Lifesafety Power FPO75-C8E2 FPO75-C8E2

• Delivers 12VDC output to support analog and IP cameras plus access control loads.
• Multi-output design centralizes power distribution, reducing field wiring complexity.
• Compatible with 110–240VAC input, simplifying deployment across regional installations.

Lifesafety Power

SKU: FPO75-C8E2M

Lifesafety Power FPO75-C8E2M Power Suppy board 75W 6A/12Vor 3A/2

• Delivers 75W at 6A/12VDC or 3A/24VDC to match mixed-voltage load requirements.
• Board-level format enables compact integration into custom enclosures or retrofit cabinets.
• Dual-voltage output reduces the need for separate supplies in camera and access control deployments.

Lifesafety Power

SKU: FPO75-C8PE1

Lifesafety Power FPO75-C8PE1 8 lock outputs class 2 power limited

• 8 independent 2.5A lock outputs eliminate per-output fusing under Class 2 rating.
• Selectable 12V/6A or 24V/3A output supports maglocks and solenoid strikes in one unit.
• 75W wall-mount supply fits retrofit and new-build access control cabinets on 120V AC.