Accessories
Showing Results for Accessories
-
Lifesafety Power
SKU: FPO150/250-2C82D8PE8H1-WP-JNJ02
Lifesafety Power FPO150/250-2C82D8PE8H1-WP-JNJ02 400W Dual Voltag
- 400W dual voltage output drives mixed 12V/24V DC loads from a single 120V AC source.
- 16 relay lock outputs support strikes, mag-locks, and momentary devices across one cabinet.
- 16 auxiliary outputs distribute power to sensors and low-draw control signals independently.
$4,425.00 $2,906.99 Save $1,518.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C82D8PE8M1
Lifesafety Power FPO150/250-2C82D8PE8M1 FPO150/250-2C82D8PE8M1
- Dual independent output channels isolate faults so one failure won't cascade to the other.
- 400W total capacity supports mixed loads across access control and IP surveillance zones.
- 120 VAC input integrates directly into standard facility power without step-down conversion.
$2,678.00 $1,758.99 Save $919.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C82D8PE8M1/P16-A
Lifesafety Power FPO150/250-2C82D8PE8M1/P16-A 400W Dual Voltage
- Dual 12V/24V output rails power mixed lock and reader loads from one chassis.
- 16 supervised relay lock outputs plus 16 auxiliary outputs support medium-scale deployments.
- 120V AC input on a dedicated 20A circuit delivers up to 400W total system capacity.
$4,696.00 $3,084.99 Save $1,611.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C83D8E8V/P16-B
Lifesafety Power FPO150/250-2C83D8E8V/P16-B 16DR DV 400W E8V
- 400W regulated output powers up to 16 independent door control rails simultaneously.
- Dual-voltage design delivers 12V DC and 24V DC to support mixed lock and reader loads.
- Ships pre-wired to Panduit standards for VERTX integration, reducing field assembly time.
$4,405.00 $2,893.99 Save $1,511.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C83D8PE4M1/T16-A
Lifesafety Power FPO150/250-2C83D8PE4M1/T16-A 16DR DV 400W E4M1
- Dual-voltage 400W supply delivers 12A at 12VDC and 10A at 24VDC simultaneously.
- 16 dedicated lock outputs and 24 auxiliary outputs support mid-scale multi-door deployments.
- Factory-prewired to 1502/MR52 tie-wrap standard reduces on-site termination labor and errors.
$3,377.00 $2,218.99 Save $1,158.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C83D8PE4M1/T16-C
Lifesafety Power FPO150/250-2C83D8PE4M1/T16-C 16DR DV 400W E4M1
- 400W dual-voltage output delivers 12A at 12V and 10A at 24V simultaneously.
- 16 individually isolated outputs eliminate crosstalk across locks, relays, and cameras.
- Factory-prewired MR52 connectors reduce on-site assembly time in dense panel builds.
$3,347.00 $2,198.99 Save $1,148.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C83D8PE8M1/T16-A
Lifesafety Power FPO150/250-2C83D8PE8M1/T16-A 16DR E8M1 400W 12A
- Delivers 12A at 12V and 10A at 24V simultaneously from a single 400W supply.
- Supports up to 16 independent door circuits, eliminating the need to stack supplies.
- Dual 120/240V AC input with built-in redundancy reduces single-point failure risk.
$4,389.00 $2,882.99 Save $1,506.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C83D8PE8M2
Lifesafety Power FPO150/250-2C83D8PE8M2 FPO150/250-2C83D8PE8M2
- Dual independent monitored outputs enable per-circuit fault isolation across camera and access control feeds.
- 400W capacity supports mid-to-large security deployments with multiple device types on separate supervised circuits.
- Each output detects open-circuit, short-circuit, and overload conditions independently, preventing silent outages.
$2,627.00 $1,725.99 Save $901.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C83D8PE8M2/P16-A
Lifesafety Power FPO150/250-2C83D8PE8M2/P16-A 16DR DV E8V 400W 12
- 400W total capacity powers mixed lock, camera, and battery circuits simultaneously.
- 16 independent relay circuits support door strikes, mag locks, and alarm switching.
- Factory pre-wired terminal blocks eliminate custom harness assembly on installation day.
$4,394.00 $2,886.99 Save $1,507.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2C83D8PE8M2/P16-B
Lifesafety Power FPO150/250-2C83D8PE8M2/P16-B 16DR E8M2 400W 12A
- 16 independent locked outputs isolate faults — one tripped circuit leaves 15 active.
- Simultaneous 12VDC/12A and 24VDC/10A outputs eliminate separate power chains per voltage.
- 400W capacity and per-output thermal breakers reduce service calls on transient faults.
$4,387.00 $2,881.99 Save $1,505.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C83D8PE8M2/T16-A
Lifesafety Power FPO150/250-2C83D8PE8M2/T16-A 16DR E8M2 400W 12A
- 400W dual-voltage output delivers 12A at 12VDC and 10A at 24VDC from one unit.
- 16 supervised output channels enable per-device fault detection and independent reset.
- Supports mixed IP camera, card reader, lock, and auxiliary loads in a single enclosure.
$4,133.00 $2,714.99 Save $1,418.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C83D8PE8M2/T16-B
Lifesafety Power FPO150/250-2C83D8PE8M2/T16-B 16DR E8M2 400W 12A
- Delivers 12A at 12VDC and 10A at 24VDC simultaneously from a single 400W enclosure.
- 16 pre-wired output channels reduce on-site assembly time on large access control installs.
- Dual-voltage architecture supports mixed loads: mag locks on 12V, readers/logic on 24V.
$4,133.00 $2,714.99 Save $1,418.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C8P2D8PE4
Lifesafety Power FPO150/250-2C8P2D8PE4 16 Lock 16 Auxiliary Outp
- Supports 16 lock outputs and 16 auxiliary outputs from a single 150W supply.
- Each lock circuit is Class 2 current-limited to 2.5A—no inline fuses required.
- Runs 12V or 24V loads; scalable to 250W for higher-density door deployments.
$1,364.00 $895.99 Save $468.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C8P2D8PE4M1
Lifesafety Power FPO150/250-2C8P2D8PE4M1 FPO150/250-2C8P2D8PE4M1
- Dual independent output channels power separate subsystems from one enclosure.
- Reduces single-point-of-failure risk across multi-zone security deployments.
- Rack- or wall-mountable design simplifies distributed access control installations.
$1,686.00 $1,107.99 Save $578.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C8P2D8PE8A
Lifesafety Power FPO150/250-2C8P2D8PE8A 16DR AMAG specific 12V &
- 400W integrated PDU powers 16 door circuits with mixed 12V and 24V outputs.
- AMAG-specific design eliminates compatibility guesswork in 16-door deployments.
- E8A enclosure (36"H×30"W×4.5"D) fits standard 19" racks or wall-mount frames.
$2,512.00 $1,649.99 Save $862.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C8P2D8PE8H1
Lifesafety Power FPO150/250-2C8P2D8PE8H1 FPO150/250-2C8P2D8PE8H1
- Delivers 400W at 12V and 24V to power up to 16 doors on Honeywell platforms.
- E8H1 enclosure (36H×30W×4.5D in) supports wall-mount or rack installation.
- Dedicated access control supply; keeps lock/reader circuits isolated from other loads.
$2,760.00 $1,812.99 Save $947.01The item has been added
Accessories
Warehouse data capture accessories support the daily operation of barcode scanners, mobile computers, RFID readers, and industrial label printers. From charging docks and batteries to mounting systems and communication cables, these components ensure reliable performance across high-volume warehouse and distribution environments.
Deployment Considerations
- Charging infrastructure for multi-shift operations
- Spare battery planning for uninterrupted workflows
- Vehicle mounts and workstation docks
- Connectivity cables and interface modules
- Device protection and environmental durability