Accessories
Showing Results for Accessories
-
Lifesafety Power
SKU: FPO150-B100C8PD8PE4A
Lifesafety Power FPO150-B100C8PD8PE4A 8DR AMAG specific with 8 au
- Eight discrete 2.5A outputs eliminate daisy-chaining across multi-door AMAG deployments.
- Dedicated 12V and 24V rails at 4A each power readers and strikes on independent circuits.
- Class 2 certified 150W supply ships in an E4 enclosure ready for 19-inch or wall-mount rack.
$1,084.00 $711.99 Save $372.01 -
Lifesafety Power
SKU: FPO150-B100C8PD8PE4M
Lifesafety Power FPO150-B100C8PD8PE4M FPO150-B100C8PD8PE4M
- Delivers 150W total with simultaneous 4A at 12V and 4A at 24V outputs.
- Supports 8 door lock circuits and 8 Class 2-rated auxiliary outputs at 2.5A each.
- E4M enclosure with Mercury backplate suits constrained security closets and cabinets.
$1,065.00 $699.99 Save $365.01 -
Lifesafety Power
SKU: FPO150-B100C8PD8PE4M1
Lifesafety Power FPO150-B100C8PD8PE4M1 FPO150-B100C8PD8PE4M1
- 150W regulated output consolidates power for cameras, readers, and door strikes.
- Eight independently fused channels limit fault propagation across connected devices.
- PD supervision monitors per-channel power delivery for proactive fault detection.
$1,339.00 $879.99 Save $459.01 -
Lifesafety Power
SKU: FPO150-B100C8PD8PE4V1
Lifesafety Power FPO150-B100C8PD8PE4V1 FPO150-B100C8PD8PE4V1
- 150W access control power supply for door locks and latches
- Multi-zone power distribution for facility deployments
- Equipment cabinet enclosure for protected install
$1,273.00 $836.99 Save $436.01 -
Lifesafety Power
SKU: FPO150-B100C8PD8PE6V
Lifesafety Power FPO150-B100C8PD8PE6V FPO150-B100C8PD8PE6V
- 150W regulated output supports multiple DC devices from a single centralized supply.
- Eliminates individual wall supplies, reducing installation labor on multi-device builds.
- Compatible with 12VDC and 24VDC readers, door strikes, and motion sensors.
$1,575.00 $1,034.99 Save $540.01 -
Lifesafety Power
SKU: FPO150-B100C8PE2M
Lifesafety Power FPO150-B100C8PE2M 150W Dual Voltage 120 VAC 8
- Delivers 150W across 8 relay lock outputs for multi-zone door hardware control.
- 120 VAC input integrates directly with standard building power—no step-down required.
- Relay-driven outputs support door strikes, mag-locks, and fail-safe latches in one supply.
$886.00 $581.99 Save $304.01 -
Lifesafety Power
SKU: FPO150-B100C8PE4M1
Lifesafety Power FPO150-B100C8PE4M1 FPO150-B100C8PE4M1
- 150W managed supply centralizes power for 4–8 camera circuits in one unit.
- Per-channel fault isolation prevents a single load failure from taking down adjacent circuits.
- Accepts AC 110–240V input, suitable for standard commercial building infrastructure.
$1,200.00 $788.99 Save $411.01 -
Lifesafety Power
SKU: FPO150-B100E1
Lifesafety Power FPO150-B100E1 FPO150-B100E1
- Delivers 4A at 12V and 4A at 24V simultaneously from a single 150W supply.
- Eliminates separate power feeds for mixed 12V sensors and 24V access control devices.
- E1 enclosure fits standard wall-mount or rack installs in control rooms and closets.
$576.00 $378.99 Save $197.01 -
Lifesafety Power
SKU: FPO150-B150C8D8PE4M
Lifesafety Power FPO150-B150C8D8PE4M 150W selectable 12/24V 12A
- 150W supply runs up to 12A at 12V or 6A at 24V for multi-door deployments.
- 8 individually fused auxiliary outputs allow independent circuit protection per door.
- Integrated fire alarm interface supports fail-safe and fail-secure lock switching.
$1,102.00 $723.99 Save $378.01 -
Lifesafety Power
SKU: FPO150-B150C8D8PE4M1
Lifesafety Power FPO150-B150C8D8PE4M1 150W Dual Voltage 120 VAC
- 150W at 120 VAC input supports mid-sized multi-door access control deployments.
- 8 relay lock outputs drive EM locks and REX devices across independent door circuits.
- 8 auxiliary outputs power sensors and ancillary devices without a separate supply.
$1,276.00 $838.99 Save $437.01 -
Lifesafety Power
SKU: FPO150-BOXED
Lifesafety Power FPO150-BOXED FPO150-BOXED
- 150W rated output handles mixed loads—cameras, readers, and door strikes in one zone.
- 12 VDC output suits standard access control readers and low-voltage security cameras.
- Factory-boxed enclosure eliminates on-site assembly, reducing installation labor at remote sites.
$371.00 $243.99 Save $127.01 -
Lifesafety Power
SKU: FPO150-C4D8E1
Lifesafety Power FPO150-C4D8E1 150W Svps 4 Aux Out CONTROLLED8 Au
- Delivers 12A at 12VDC or 6A at 24VDC to power cameras, strikes, and controllers.
- Four independent 3A-fused outputs isolate faults and prevent cascading circuit failures.
- 150W supervised supply suits small-to-mid-scale distributed security deployments.
$636.00 $417.99 Save $218.01 -
Lifesafety Power
SKU: FPO150-C4E2M
Lifesafety Power FPO150-C4E2M FPO150-C4E2M
$702.00 $461.99 Save $240.01 -
Lifesafety Power
SKU: FPO150-C4PE1
Lifesafety Power FPO150-C4PE1 4 lock outputs class 2 pwr ltd at 2
- Four independent 2.5A outputs support 12V or 24V locks from a single 150W supply.
- Class 2 rating eliminates separate power-limited circuit wiring for each lock run.
- E1 enclosure suits cabinet or wall-mount install in commercial controlled environments.
$582.00 $382.99 Save $199.01 -
Lifesafety Power
SKU: FPO150-C82D8E2
Lifesafety Power FPO150-C82D8E2 150W Single Voltage 120 VAC 8 Re
- Delivers 150W regulated output to power multiple door strikes and mag locks.
- Eight relay lock outputs enable dedicated switched control for each door circuit.
- 16 auxiliary output circuits support alarm devices, strobes, and ancillary loads.
$822.00 $539.99 Save $282.01 -
Lifesafety Power
SKU: FPO150-C82D8PE4M/T8-A
Lifesafety Power FPO150-C82D8PE4M/T8-A 150W Single Voltage 120
- Delivers 150W at 120VAC input to power locks, readers, and exit devices across zones.
- Eight dedicated relay lock outputs enable direct control of electric locks and strike plates.
- Sixteen auxiliary outputs support signaling and device switching in multi-door deployments.
$1,789.00 $1,175.99 Save $613.01
Accessories
Warehouse data capture accessories support the daily operation of barcode scanners, mobile computers, RFID readers, and industrial label printers. From charging docks and batteries to mounting systems and communication cables, these components ensure reliable performance across high-volume warehouse and distribution environments.
Deployment Considerations
- Charging infrastructure for multi-shift operations
- Spare battery planning for uninterrupted workflows
- Vehicle mounts and workstation docks
- Connectivity cables and interface modules
- Device protection and environmental durability