Sub categories

Showing Results for Warehouse Data Capture

Compare

Out of stock
Wasp

SKU: 633808920739

Wasp 633808920739 Battery Cover For WDT3200 & WDT3200II
- Genuine replacement cover restores dust and moisture sealing on WDT3200/WDT3200II units.
- Tool-free installation clips into place with no downtime required during field operations.
- Fit-verified for WDT3200 and WDT3200II only — confirm model before ordering to avoid mismatch.
$12.99

Add to Cart
The item has been added
Free shipping over $499

$12.99

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633808928124

Wasp 633808928124 DT60 Single Slot Cradle
- IP54-rated cradle withstands dust and splash exposure at active staging stations.
- Single-slot form factor minimizes bench footprint for small workgroup deployments.
- Charges and syncs the DT60 via dedicated cradle connector for reliable shift handoffs.
$249.00 $230.99 Save $18.01

Add to Cart
The item has been added
Free shipping over $499

$249.00 $230.99 Save $18.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633808928179

Wasp 633808928179 Wasp DT60 Standard Battery 1800 mAh
- Genuine 1800 mAh replacement restores full shift runtime to DT60 mobile computers.
- Tool-free swap with audible-click seating minimizes device downtime during deployment.
- Charges to full capacity in a standard DT60 dock within 2–4 hours.
$79.00 $78.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$79.00 $78.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633808928186

Wasp 633808928186 Wasp DT60 High capacity battery 3600 mAh
- 3600 mAh capacity supports full-shift deployments without mid-shift recharging breaks.
- Tool-free swap via rear access panel minimizes device downtime during active operations.
- Designed exclusively for Wasp DT60 mobile computers to maintain safe charging and warranty.
$129.00 $119.99 Save $9.01

Add to Cart
The item has been added
Free shipping over $499

$129.00 $119.99 Save $9.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633808928643

Wasp 633808928643 Wasp DT90/DT92 High Capac Batry 5200 Mah
- 5200 mAh capacity supports full-shift operation in DT90/DT92 terminals without mid-day swaps.
- Tool-free field replacement minimizes device downtime during active warehouse or field deployments.
- Exclusive DT90/DT92 compatibility prevents incorrect installs; verify model before deployment.
$129.00 $119.99 Save $9.01

Add to Cart
The item has been added
Free shipping over $499

$129.00 $119.99 Save $9.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633808928674

Wasp 633808928674 Wasp DT90/DT92 holster
- IP64-rated housing resists dust and water splashing in active warehouse environments.
- Belt-loop mount requires no tools, enabling rapid deployment across operator shifts.
- Purpose-built retention for DT90/DT92 prevents accidental ejection during movement.
$59.00 $58.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$59.00 $58.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633808928698

Wasp 633808928698 Wasp DT90/DT92 single slot dock kit
- Charges and syncs DT90/DT92 terminals via USB without manual cable connections.
- IP64-rated compatible terminals withstand dust and water ingress in harsh environments.
- Desktop dock needs no tools or mounting hardware for rapid deployment at shift end.
$240.00 $222.99 Save $17.01

Add to Cart
The item has been added
Free shipping over $499

$240.00 $222.99 Save $17.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633808928995

Wasp 633808928995 WASPHC1 Mcqwerty Nobt/Wifi/Cam Mfg Hwrmv
- Direct drop-in replacement restores HC1 keyboard function with no tools required.
- Ships with Bluetooth, Wi-Fi, and camera disabled—ideal for restricted-use deployments.
- HC1-exclusive dock connector ensures precise fit; confirm HC1 model before ordering.
$1,595.00 $1,450.99 Save $144.01

Add to Cart
The item has been added
Free shipping over $499

$1,595.00 $1,450.99 Save $144.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633808929664

Wasp 633808929664 Wasp WLS9600/WDI4600 Scanner Smart Stand
- Holds WLS9600 and WDI4600 scanners upright, freeing hands at checkout or receiving stations.
- Enables autosense scanning mode so the scanner triggers automatically when lifted from the stand.
- Passive stand design requires no external power wiring, drilling, or wall mounting to deploy.
$59.00 $58.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$59.00 $58.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633808929848

Wasp 633808929848 WLS8600 Industrial Scnner Hands-Free Std
- Fixed 45° mount enables hands-free presentation scanning at 35 scans/sec throughput.
- USB and RS-232 interfaces connect directly to POS, WMS, or label printer hosts.
- Stand-only install—no power or config needed; mounts on any flat work surface.
$59.00 $54.99 Save $4.01

Add to Cart
The item has been added
Free shipping over $499

$59.00 $54.99 Save $4.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633808951207

Wasp 633808951207 Wasp WWS150I Crdless Pkt Barcod Scnr USB
- Scans at 200 scans/sec, keeping up with high-volume picking and cycle-count workflows.
- 2 MB onboard memory retains scan data during disconnected or batch-collection operations.
- HID-class USB connection requires no drivers, simplifying deployment on Windows terminals.
$195.00 $175.99 Save $19.01

Add to Cart
The item has been added
Free shipping over $499

$195.00 $175.99 Save $19.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633809000201

Wasp 633809000201 Wasp WWS250I 2D Pckt Barcod Scnr W/USB
- Reads 2D symbologies (Aztec, Data Matrix, PDF417) at 30 fps for high-throughput scanning.
- USB HID mode requires no drivers — plug into any Windows, macOS, or Linux host instantly.
- Weighs 70 g and operates from -10°C to 40°C, suiting mobile field and warehouse deployments.
$325.00 $292.99 Save $32.01

Add to Cart
The item has been added
Free shipping over $499

$325.00 $292.99 Save $32.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633809001048

Wasp 633809001048 Wasp DR2 Ext Battery Kit Incl Bat & Covr
- Extends DR2 runtime past standard single-battery limits, supporting 8–12 hour shifts.
- Includes paired protective cover to guard against physical damage and moisture ingress.
- Model-specific fit for Wasp DR2 computers; verify DR2 variant before ordering.
$158.00 $157.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$158.00 $157.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633809001185

Wasp 633809001185 Pre-Prntkimduraassttag 2X1(3101-4100)Spo
- Kimdura polypropylene substrate resists moisture, oils, and abrasion where paper labels fail.
- Pre-printed sequential tags (3101–4100) integrate directly with Wasp MobileAsset and AssetCloud.
- Rated -40°C to 80°C; suitable for loading docks, unheated warehouses, and outdoor assets.
$225.00 $208.99 Save $16.01

Add to Cart
The item has been added
Free shipping over $499

$225.00 $208.99 Save $16.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633809002168

Wasp 633809002168 Wasp DR4/DR3 single slot USB cradle
- Simultaneously charges and syncs DR4/DR3 units via standard USB—no extra adapters.
- Single-slot design simplifies shift-rotation staging for DR4/DR3 fleets at pick stations.
- No tools or configuration required; connects to any host PC or powered USB hub instantly.
$179.00 $178.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$179.00 $178.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Wasp

SKU: 633809002175

Wasp 633809002175 Wasp DR4/DR3 Std Battery 37V 3200MAH
- 3.7V 3200mAh cell restores full shift runtime to DR4/DR3 mobile computers.
- Tool-free cartridge swap minimizes device downtime during active warehouse shifts.
- Exclusive DR4/DR3 fit — verify device model before ordering to ensure compatibility.
$95.00 $94.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$95.00 $94.99 Save $0.01

Add to quote Compare

Warehouse Data Capture

Warehouse data capture systems power modern inventory visibility, order accuracy, and real-time operational intelligence. Select from rugged barcode scanners, mobile computers, RFID systems, and industrial label printing platforms designed for high-throughput warehouse and distribution environments.

Plan Your Deployment

Scan range and barcode symbology support
Ruggedization and drop resistance requirements
Wireless connectivity and roaming performance
Battery life and shift-length operation
Integration with WMS, ERP, and inventory systems

Mobile Computers Barcode Scanners RFID Systems Label Printers

What to Look For When Buying

The six decisions that matter most before you spec.

Drop & IP Rating for Rugged Devices

Consumer-grade barcode scanners and Android handhelds fail quickly in warehouse environments. Specify 6-foot drop-to-concrete minimum (Zebra TC53/TC73 rated to 8ft), IP65 sealing for dust and splash, and MIL-STD-810H certification for temperature and vibration tolerance. The TCO math strongly favors enterprise devices — downtime from a failed device outweighs the per-unit cost premium quickly.

1D Laser vs 2D Imager Scanners

1D laser scanners read linear barcodes (Code 128, UPC) at long range with sharp focus — still preferred for high-volume SKU picking at 10-15ft. 2D imagers read QR codes, stacked symbologies, and damaged/wrinkled labels — essential for modern retail, healthcare (GS1 DataMatrix), and pharmaceutical traceability. New deployments default to 2D imagers; 1D lasers only for specialty long-range applications.

Wired vs Wireless Scanners

Corded USB scanners are $100-200 cheaper, zero battery management, and reliable for fixed-POS and lab workstations. Wireless (Bluetooth or Zebra STB cradle) scanners add $150-300 but enable 33-100ft roaming — essential for receiving, case-pick, and warehouse workflows. For high-volume picking, specify wireless with hot-swappable batteries.

Direct Thermal vs Thermal Transfer Printing

Direct thermal labels use heat-sensitive paper — no ribbon required, lower per-label cost, but labels fade in heat/sun/chemicals. Thermal transfer uses a wax/resin ribbon — longer-lasting labels suitable for cold-chain, outdoor, and long-term asset tagging. Match technology to label lifespan: shipping labels = direct thermal; asset tags = thermal transfer with resin ribbon.

Android Enterprise vs Consumer OS

Enterprise mobile computers run Android Enterprise (formerly Android for Work) with Zebra Mobility Extensions, Honeywell Mobility Edge, or Datalogic enterprise services — enabling remote management (MDM), app whitelisting, and OS lifecycle support measured in years. Consumer Android tablets are orphaned from OS updates in 18-24 months and lack enterprise-grade MDM. Specify enterprise OS for any deployment over 10 devices.

RFID Frequency & Standards

UHF Gen2 (EPC Global Class 1 Gen2, 860-960 MHz) is the warehouse and supply-chain standard — 10-30ft read range, thousands of tags per second, case and pallet-level tracking. HF/NFC (13.56 MHz) is short-range (inches) for access, payment, and authentication. LF (125 kHz) is legacy proximity. For inventory and asset tracking at scale, UHF Gen2.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

Enterprise Android (AOSP + Mobility Extensions)

Zebra Mx (Mobility Extensions) and Honeywell Mobility Edge extend base Android with enterprise-grade kiosk mode, peripheral management, OS lifecycle guarantees (typically 5+ years of OS updates), and integration with MDM platforms (SOTI MobiControl, VMware Workspace ONE, Microsoft Intune). Essential for scaled deployments.

Symbology Support (1D + 2D)

Modern 2D imagers read 30+ symbologies: UPC/EAN, Code 128, Code 39, Interleaved 2-of-5, QR, Data Matrix, PDF417, Aztec, GS1 DataBar. Healthcare and pharma workflows rely on GS1 DataMatrix for unit-dose barcoding. Ensure scanner firmware includes the symbologies you actually use — some are license-gated on certain models.

Bluetooth + Wi-Fi Dual-Radio

Enterprise handhelds run simultaneous Bluetooth (for peripheral connections — scanners, printers, sleds) and Wi-Fi 6 (for data backhaul). Specify Wi-Fi 6 for new deployments — throughput + client density matter in warehouse environments with 100+ mobile devices per AP. Socket Mobile, Zebra, and Honeywell all ship Wi-Fi 6 flagship models.

Thermal Printhead Life

Direct thermal and thermal transfer printheads are consumable — rated for 20-50 miles of print at label width. Industrial printers (Zebra ZT610, Sato CL4NX) reach 50-mile printhead life; desktop models (Zebra ZD620) are closer to 20 miles. Printhead replacement cost vs. new-printer cost is the key budget factor for high-volume shipping operations.

RFID Read Performance

UHF Gen2 read rate depends on reader power (typically 30 dBm / 1W US, 27 dBm / 0.5W EU), antenna gain (6-9 dBiC typical), tag orientation, and ambient RF environment. Warehouse dock-door portals with four circularly-polarized antennas read 200-500 tags per pallet pass at typical forklift speeds. Site surveys and tag-on-carrier validation are essential.

MDM + Enterprise App Lifecycle

Enterprise mobile computers integrate with MDM platforms for zero-touch provisioning, remote troubleshooting, app update push, and kiosk-mode lockdown. Zebra StageNow, Honeywell Launcher, and Datalogic SOTI certification — match your device platform to your MDM platform carefully, or provisioning becomes a manual nightmare at scale.

Typical Deployment Scenarios

Distribution Center Receiving

Rugged forklift-mounted computers with tethered long-range 1D/2D scanners for pallet receipt. Dock-door UHF Gen2 RFID portals for auto-identification of tagged inbound cases. Zebra ZT610 industrial label printers for pallet label reprinting. MDM-managed Android fleet with WMS client (SAP EWM, Oracle WMS, Manhattan).

Retail Back-of-House + POS

Honeywell Genesis or Zebra DS2278 2D corded scanners at point-of-sale. Socket Mobile handheld scanners for line-busting and inventory checks. Zebra ZD411 desktop label printers at receiving dock. Mobile computers for cycle counts and replenishment. Mixed 1D/2D scanning across UPC and retail-private-label SKUs.

Hospital Clinical Supply Chain

Zebra TC52 handhelds for bedside medication verification (5 Rights scanning, GS1 DataMatrix on unit-dose packs). Zebra ZD510 wristband printers for patient ID bands at admission. HIPAA-compliant MDM + app lockdown. Integration with EHR (Epic, Cerner) via middleware. High-durability sanitization cycles — IP65 rated devices.

Parcel + Shipping Operation

Zebra ZT411 industrial thermal-transfer printers for 4x6 shipping labels at 300-600 dpi. TSC TTP-346 or Sato CL4NX for label reprint. Zebra DS3608 rugged 2D scanners for confirm-ship workflows. Direct integration with shipping platforms (ShipStation, ReadyCloud, UPS WorldShip, FedEx Ship Manager).

Frequently Asked Questions

Should I buy 1D laser or 2D imager barcode scanners?

For new deployments, default to 2D imagers — they read every 1D symbology plus 2D codes (QR, Data Matrix, PDF417). 1D laser scanners still excel at long-range linear barcode reading (10-15ft) and are cheaper, so they remain popular for high-volume warehouse picking. Healthcare and pharmaceutical workflows require 2D imagers for GS1 DataMatrix. Match technology to your symbology mix.

What's the difference between a rugged enterprise mobile computer and a consumer Android tablet?

Enterprise devices (Zebra TC, Honeywell CT, Datalogic Memor) are rated for 6-8ft drops, IP65 sealing, MIL-STD-810H certification, integrated barcode scanners, 5+ year OS support, and MDM-managed lifecycle. Consumer tablets die within weeks in warehouse environments, lack integrated scanners, and are orphaned from OS updates in 18-24 months. TCO strongly favors enterprise for any 24/7 operation.

Direct thermal or thermal transfer — which printer do I need?

Direct thermal for short-lifespan labels (shipping, receiving, pick labels) — no ribbon required, lower per-label cost, but labels fade in heat/sun/chemicals. Thermal transfer for long-life labels (asset tags, cold-chain, outdoor, compliance labels) — uses wax or resin ribbon, resistant to heat and chemicals, lasts years. Many industrial printers (Zebra ZT411) support both modes — switch between based on media.

Are there NDAA-compliant options for barcode scanners and mobile computers?

Zebra Technologies (US-headquartered, Lincolnshire IL), Honeywell (US), Datalogic (Italy), and Socket Mobile (US) are all NDAA Section 889 compliant. For federal and critical-infrastructure warehouse deployments, these brands are safe choices. Chinese-manufactured scanner brands — primarily rebrands — are excluded from federal procurement.

Do I need UHF Gen2 RFID or is barcode scanning enough?

Barcode scanning is still the standard for most operations — it's cheap, reliable, and every vendor supports it. UHF Gen2 RFID adds value when you need to read 100+ items simultaneously (dock-door portal reading a pallet), identify items without line-of-sight (sealed cases, tote contents), or track assets in large open environments. RFID infrastructure is expensive — evaluate ROI against your specific workflow before committing.

How do I choose between Zebra, Honeywell, and Datalogic mobile computers?

Zebra is the market leader with the broadest catalog and best MDM ecosystem. Honeywell is strong in healthcare (color-coded devices, sanitization-rated) and delivery/logistics. Datalogic competes on value and has excellent European support + Memor 11 is a strong Zebra TC52 alternative. All three run Android Enterprise with 5-year OS support. Match device to your existing WMS/app partner certifications first, then price.

Sub categories

Showing Results for Warehouse Data Capture

Warehouse Data Capture

Plan Your Deployment

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading