Code Blue · CB2A00551

Code Blue CB2AP Sbl Wem Np Dr - CB2A00551

Wall mount enclosure accessory for the Code Blue CB2 Series speakerphone system

• Direct replacement enclosure for CB2 Series speakerphones; no cross-series compatibility.
• Supports wall and pole mounting configurations using standard fastening hardware.
• Compatible with 12–24V DC power; verify against existing CB2 system before install.

Code Blue · CB2AP00551

Code Blue CB2AP00551

Replacement or complementary component designed for the CB2 Series wall mount enclosure family

• Designed as a direct replacement or expansion component for CB2 Series enclosures.
• Supports wall, pole, recessed, and rack mount configurations for flexible deployment.
• Compatible with 12–24V DC paging amplifier architecture in CB2 Series installations.

Code Blue · CB2AP00556

Code Blue CB2AP00556 AP Sylinder CC Remote NP

Replacement sylinder component designed for Code Blue CB2 series access point systems

• OEM replacement cylinder ensures spec-matched fit for CB2 series access points.
• Remote control capability supports centralized management in networked installations.
• Designed for CB2 AP systems, simplifying maintenance without field reconfiguration.

Code Blue · CB2E00510

Code Blue CB2E Brg Cc Yem Np - CB2E00510

Wall mount enclosure accessory designed for Code Blue CB2 Series speakerphones

• Wall-mount enclosure designed specifically for CB2 Series speakerphone deployments.
• Supports installations in stairwells, corridors, loading docks, and security checkpoints.
• Serves as a direct replacement for damaged CB2 enclosures, simplifying field maintenance.

Code Blue · SLNF0331

Code Blue CB2E Bsl Blem Np 4GLTE Poe - SLNF0331

Baffled (Blem) network enclosure designed specifically for the Code Blue CB2 Series wall-mount paging system towers

• PoE power input eliminates a separate DC supply run for CB2 Series wall-mount towers.
• 4G LTE connectivity provides cellular redundancy for life-safety paging where wired paths fail.
• Baffled (Blem) enclosure design reduces wind load and acoustic feedback in outdoor installs.

Code Blue · CB2E00547

Code Blue CB2E Bsl Cc Blas Np Poe - CB2E00547

Replacement or supplemental audio paging component designed for the Code Blue CB2 Series wall-mount speakerphone enclosures

• PoE power input eliminates the need for a separate 24V DC power supply.
• Designed exclusively for CB2 Series enclosures; not compatible with CB1, CB4, CB5, CB6, CB9, CBRT, or LS.
• Adds or replaces audio paging capability in existing CB2 deployments without external amplifiers.

Code Blue · CB2E00495

Code Blue CB2E Bsl Cc Blem Np Poe - CB2E00495

Replacement or additional wall mount enclosure accessory for Code Blue CB2 series speakerphones

• PoE power delivery eliminates separate DC power runs to the wall location.
• Accepts analog audio input from paging controllers or VoIP systems.
• Designed as a direct replacement or supplemental unit in CB2 series deployments.

Code Blue · CB2E00511

Code Blue CB2E Bsl Cc Blpo Np Std - CB2E00511

Replacement or accessory component for Code Blue CB2 Series wall mount speakerphone enclosures

• Integrates into CB2 Series wall-mount enclosures for modular emergency audio deployments.
• Supports 12–24V DC paging amplifier input, simplifying power integration at the enclosure.
• Wall, pole, recessed, and rack mount options provide flexible installation configurations.

Code Blue · CB2E00527

Code Blue CB2E Bsl Wem Np Sdr - CB2E00527

Replacement wall mount enclosure for Code Blue CB2 Series speakerphones

• Direct replacement enclosure engineered exclusively for CB2 Series speakerphones.
• Supports wall, pole, recessed, and rack mounting for flexible field deployment.
• Accepts 12–24V DC wiring transfer from existing unit, simplifying swap-out installs.

Code Blue · CB2E00550

Code Blue CB2E Dbz Wem Np Sdr - CB2E00550

Replacement enclosure component for the Code Blue CB2 Series wall-mounted speakerphone systems

• Replaces CB2 Series enclosures without additional adapters for audio wiring.
• Accepts 12–24V DC input, matching existing CB2 paging amplifier power specs.
• Supports wall, pole, recessed, and rack mounting for flexible deployment.

Code Blue · CB2E00460

Code Blue CB2E Gbk Wem Np Poe - CB2E00460

Wall mount enclosure designed for Code Blue CB2 series speakerphones, supporting audio input and PoE power delivery

• PoE power delivery eliminates separate DC power supplies, simplifying retrofit wiring.
• Supports wall, pole, recessed, and rack mounting for flexible CB2 series deployments.
• Integrated audio input enables connection to external paging systems or audio sources.

Code Blue · CB2E00505

Code Blue CB2E Sbl Bkas Np Poe - CB2E00505

PoE-powered speaker bracket assembly designed for Code Blue CB2 series wall-mount enclosure systems

• PoE power delivery eliminates separate DC supply needs in networked audio runs.
• Supports wall, pole, recessed, and rack mounting for flexible facility deployment.
• Designed as a drop-in replacement for CB2 series enclosures—no infrastructure redesign.

Code Blue · CB2E00553

Code Blue CB2E Sbl Cc Was Np Poe - CB2E00553

Wall mount enclosure accessory designed for integration with Code Blue CB2 series speakerphones

• PoE power eliminates auxiliary AC or DC wiring at each audio endpoint.
• Mounts on walls, poles, recessed surfaces, or rack for flexible deployment.
• Accepts audio input for paging integration into existing VoIP systems.

Code Blue · CB2E00357

Code Blue CB2E Sbl Was Np Poe - CB2E00357

Wall-mount enclosure assembly for Code Blue CB2 Series speakerphone systems

• PoE (802.3af+) eliminates dedicated DC power wiring to each wall-mount endpoint.
• Supports wall, pole, recessed, and rack mounting for flexible site deployment.
• Routes a single CAT5e+ cable for both data and power, simplifying conduit planning.

Code Blue · CB2E00484

Code Blue CB2E Srd Bkem Np Std Dr - CB2E00484

Replacement wall-mount enclosure for the Code Blue CB2 Series speakerphone line

• Direct replacement enclosure eliminates rewiring — reuses existing CB2 Series terminals.
• Supports 12–24V DC input, matching CB2 Series power infrastructure without modification.
• Wall-mount form factor fits standard installations in active paging and VoIP deployments.

Code Blue · CB2E00297

Code Blue CB2E Ss Bkem Np Sdr - CB2E00297

Wall mount enclosure component designed as a replacement or spare part for Code Blue CB2 Series speakerphone installations

• Direct replacement enclosure for CB2 Series units — no power or network changes needed.
• Supports wall, pole, recessed, and rack mounting to match your existing installation.
• Restores enclosure integrity during maintenance cycles or damage remediation in the field.

Code Blue · CB2E00537

Code Blue CB2E Ss Blse Np Poe - CB2E00537

PoE-powered audio accessory designed for the CB2 Series wall-mount speakerphone enclosures

• PoE-powered operation eliminates separate 24V DC supply at each remote speaker location.
• Designed for CB2 Series wall-mount enclosures; verify CB2 model variant before ordering.
• Supports wall, pole, recessed, and rack mount configurations for flexible deployment.

Code Blue · CB2E00453

Code Blue CB2E Ss Blse Np Sdr - CB2E00453

Stainless steel baseplate and pole adaptor assembly designed as a replacement or additional mounting component for Code Blue CB2 series wall-mount

• Converts CB2 series wall-mount enclosures to pole-mount without replacing the unit.
• Stainless steel construction resists corrosion in outdoor, wet, and industrial environments.
• Supports wall and pole mount configurations, expanding deployment flexibility on-site.

Code Blue · CB2E00513

Code Blue CB2e SS GrEm NP PoE - CB2E00513

PoE-powered audio accessory designed for Code Blue CB2 series wall mount enclosures

• PoE-powered operation eliminates dedicated DC power runs at the installation point.
• Supports wall, pole, recessed, and rack mounting to fit varied facility layouts.
• Designed as a direct replacement accessory for CB2 series wall mount enclosures.

Code Blue · CB2E00538

Code Blue CB2E Ss Wem Np Dr Poe - CB2E00538

Wall mount enclosure accessory designed for the CB2 series audio system family

• PoE input consolidates voice and power onto one cable run, eliminating extra power drops.
• Supports wall, pole, recessed, and rack mounting for flexible indoor deployment points.
• Designed as a direct replacement or expansion component within the CB2 series audio family.

Code Blue · CB2E00549

Code Blue CB2E Syl Ng Np Sdr - CB2E00549

Replacement signaling device component for Code Blue CB2 Series wall mount emergency communication enclosures

• Replaces or extends CB2 Series wall-mount emergency communication enclosures.
• Operates on 12–24V DC, fitting into existing enclosure power supplies without modification.
• Supports audio input for integration with paging amplifiers or audio distribution systems.

Code Blue · CB2E00532

Code Blue CB2E Syl Rem Np Sdr - CB2E00532

Remote speaker replacement component designed for Code Blue CB2 Series wall mount enclosures

• Extends audio paging to secondary zones without a dedicated power supply.
• Runs on 12–24V DC drawn directly from the CB2-series paging amplifier output.
• Mounts to wall or pole, enabling flexible speaker placement across multi-zone layouts.

Code Blue · SLNF0425

Code Blue CB2E Syl Wem Np 4G LTE - SLNF0425

4G LTE network module designed for Code Blue CB2E emergency communication systems

• Adds 4G LTE cellular connectivity to CB2E emergency units where wired networks are unavailable.
• Supports wall, pole, recessed, and rack mounting for flexible indoor and outdoor deployments.
• Retrofits directly into existing CB2E enclosures, upgrading legacy installs without full replacement.

Code Blue · CB2E00477

Code Blue CB2E00477 CB2E Gwt Blem Np Sdr

• Supports 12–24V DC input, fitting a wide range of existing power infrastructures.
• Drop-in replacement for CB2e paging amplifiers with no mounting or wiring changes.
• Restores full CB2e amplifier functionality, minimizing downtime on active deployments.

Code Blue · CB2E00478

Code Blue CB2E00478 CB2E Gwt Blem Np Sdr

• Integrates BLE and SDR in one module, supporting flexible digital radio communications.
• Operates on 24V DC power, compatible with standard Code Blue system power infrastructure.
• Modular drop-in replacement design simplifies field servicing of Code Blue installations.

Code Blue · CB2E00489

Code Blue CB2E00489 CB2E Sbl Cc Was Sdr Part

Replacement component designed for security and audio paging amplifier systems

• Accepts 12–24V DC input, simplifying deployment across mixed-voltage facility environments.
• Direct replacement for CB2E series paging amplifiers, minimizing system downtime during swap.
• Restores continuous power delivery to emergency paging and audio distribution infrastructure.

Code Blue · CB2E00490

Code Blue CB2E00490 CB2E Srd Was Np Std

• Operates on 12–24V DC, supporting both new installations and retrofits.
• Direct replacement component restores full CB2E paging amplifier functionality.
• Stocking this spare minimizes downtime during CB2E system maintenance or expansion.

Code Blue · CB2E00491

Code Blue CB2E00491 CB2E Ss Yas Np Sdr Part

• Operates on 12-24V DC, supporting both legacy and modern power configurations.
• Direct MPN match (CB2E00491) ensures confirmed compatibility with Code Blue paging amplifiers.
• Stocking this spare part reduces downtime during audio paging system maintenance or upgrades.

Code Blue · CB2E00498

Code Blue CB2E00498 CB2E Sbl Yem Np Sdr

• Direct replacement component restores paging amplifier audio distribution without system redesign.
• Operates on 24V DC, fitting standard low-voltage power infrastructures in existing installations.
• Purpose-built spare part for Code Blue paging amplifiers, supporting maintenance and uptime continuity.

Code Blue · CB2E00501

Code Blue CB2E00501 CB2E Syl Blem Np Sdr

Replacement component designed for CB2e series paging amplifier systems

• Designed as a direct replacement for CB2e series paging amplifier components.
• Accepts 12–24V DC input, supporting flexible integration across varied power infrastructures.
• Supports SYL BLEm network protocol for compatibility within CB2e signal distribution chains.

Code Blue · CB2E00516

Code Blue CB2E00516 CB2E Syl Wem Np Sdr Part

Replacement component designed for the CB2e audio paging amplifier system

• OEM replacement ensures direct compatibility with CB2e paging amplifier series.
• Supports 12–24V DC input, matching existing CB2e power configurations.
• Enables field repairs without system reconfiguration, minimizing downtime.

Code Blue · CB2E00523

Code Blue CB2E00523 CB2E Gbk Wem Np Sdr

• Direct-fit replacement module restores Code Blue paging amplifier systems quickly.
• Operates on 24V DC input, matching existing amplifier power infrastructure.
• Spare part sourcing simplifies maintenance for deployed Code Blue paging installations.

Code Blue · CB2E00542

Code Blue CB2E00542 CB2e SS Win NP SDR Part

• Delivers regulated 24V DC output to Code Blue paging amplifier modules.
• Accepts 12–24V DC input range, simplifying installation across varied power sources.
• Direct replacement component minimizes downtime during amplifier maintenance or upgrades.

Code Blue · CB2E00543

Code Blue CB2E00543 CB2E Bsl Cc Wem Np Sdr Part

Direct replacement component for Code Blue paging amplifiers, specifically designed to address issues with audio output and power delivery

• Restores full amplification in existing Code Blue paging systems without redesign.
• Accepts 12–24V DC input, supporting multi-voltage site configurations.
• Security-grade construction suits professional audio/paging infrastructure deployments.

Code Blue · CB2E00546

Code Blue CB2E00546 CB2E Bsl Bkem Np Sdr

Replacement component designed for paging amplifier systems

• Accepts 12–24V DC input, fitting installations with varying power source specs.
• Direct drop-in replacement for Code Blue paging amplifier systems reduces downtime.
• Multi-voltage design simplifies inventory management across mixed-voltage deployments.

Code Blue · CB2AED00032

Code Blue CB2EAED Gwt Blas Np 120V - CB2AED00032

120V paging amplifier designed as a replacement component for Code Blue CB2 Series wall-mount emergency communication enclosures

• Direct replacement amplifier keeps CB2 Series wall-mount enclosures operational.
• Runs on standard 120V AC mains — no transformer or voltage conversion required.
• Restores paging audio distribution in CB2 speakerphone systems without full unit swap.