Middle Atlantic VWM DR W/solid 42HX16D BW - VWM-SSD-4216-BW

Middle Atlantic VWM-SSD-4216-BW Split Solid Front Door for 42U Wall Mount Racks

Overview

The Middle Atlantic VWM-SSD-4216-BW is a split solid steel front door designed specifically for Middle Atlantic's VWM series 42U wall mount racks with a 16-inch depth profile. If you're running a VWM rack in a public corridor, classroom, or any space where passive ventilation takes a back seat to a clean, tamper-resistant appearance, this door closes that gap without requiring a full enclosure swap. The VWM-SSD-4216-BW ships at 47 lbs, which tells you this is a genuine steel panel — not a thin cosmetic fascia — built to hold up in demanding facility environments.

Middle Atlantic is a well-established name in the rack systems and AV infrastructure category, and this door is sourced and sold as a genuine factory component, not an aftermarket substitute. Buyers spec'ing the broader Middle Atlantic rack catalog will find the VWM-SSD series doors are the purpose-matched closure option for the VWM wall mount line.

Key Features

• 42U Height (106.7 cm / 42 in): Matches the full-height VWM 42U rack opening exactly — no gaps at the top or bottom that would expose cable runs or equipment faces to casual access or dust ingress. If your rack is a 42U VWM, this is the correct door height. A 45U or 36U rack needs a different door — do not mix heights.
• 16-Inch Depth Profile (40.6 cm): Sized for the 16-inch VWM rack depth variant. Shallow-depth VWM racks (12-inch) use a different door. Confirm your rack's listed depth before ordering — depth determines door clearance and swing arc against adjacent walls.
• Split Door Design: The door opens in two halves rather than as a single full-height panel. In a wall-mount installation where vertical clearance above or below the rack is limited, a split door lets you open one half for routine patch access without swinging a 42-inch panel into foot traffic or adjacent equipment. This is the practical reason to specify the SSD variant over a single solid door in tight server rooms or IDF closets.
• Solid Steel Construction: The steel panel provides physical security and visual closure. Unlike vented or mesh doors, a solid door blocks line-of-sight to installed equipment — relevant in shared spaces, reception areas, or anywhere rack contents should not be visible to general building occupants. It also eliminates the minor airflow contribution of a vented door, so factor in your thermal load when specifying this alongside high-heat equipment.
• Black Powder Coat Finish: The black powder coat is a durable, chip-resistant surface treatment — not paint. It stands up to cleaning agents used in commercial building maintenance and matches the standard black finish of other Middle Atlantic VWM rack components, keeping the installation visually consistent across the enclosure.
• TAA Compliant: Verified TAA (Trade Agreements Act) compliance means the VWM-SSD-4216-BW is eligible for federal, state, and local government procurement contracts that require domestic or TAA-designated-country sourcing. If your project is a government facility or educational institution operating under TAA-required purchase rules, this matters at the PO stage.
• RoHS and TSCA Compliant: RoHS compliance restricts hazardous substances in the material composition — relevant for facilities with environmental procurement policies or LEED project documentation. TSCA compliance (Toxic Substances Control Act) applies in US facilities with chemical safety requirements. Both are already satisfied here without additional vendor documentation requests.
• Prop 65 (GREENGUARD) Noted: California Proposition 65 disclosure is present on this product. This is a standard compliance notice, not a product defect — but note it for California-based installations that require Prop 65 disclosure tracking in procurement records.
• Product Weight 29.5 lbs (13.4 kg): At 29.5 lbs, this is a substantial door panel. Factor this weight into your wall-mount rack installation planning — the VWM rack's wall anchors and the wall substrate itself need to be appropriately rated for the combined rack, door, and equipment load. Confirm with your structural drawings before final install.

Integration and Compatibility

The VWM-SSD-4216-BW is engineered for Middle Atlantic's VWM wall mount rack series at the 42U / 16-inch depth configuration. It is not a universal fit — rack height (42U), rack depth (16 inches), and series (VWM) all must match. Pairing this door with the correct wall mount rack from the VWM line is the only supported configuration. If you are building out a new VWM rack and need complementary components — side panels, rear doors, or PDUs — refer to the broader rack accessories category for compatible additions. This door does not include locking hardware by default; if physical key-lock access control on the door is required, verify lock kit compatibility with Middle Atlantic before finalizing the order.

Frequently Asked Questions

Q: Is the VWM-SSD-4216-BW TAA compliant for government procurement?

A: Yes. The VWM-SSD-4216-BW is verified TAA compliant, making it eligible for federal and state government contracts that require Trade Agreements Act conformance.

Q: What rack is this door designed to fit?

A: The VWM-SSD-4216-BW is designed for Middle Atlantic VWM series wall mount racks that are 42U tall and 16 inches deep. It will not fit VWM racks with a different depth (e.g., 12-inch) or a different unit height.

Q: Why is a split solid door preferred over a single-panel solid door?

A: A split door opens in two independent halves. In wall-mount IDF or AV rack installations where vertical clearance is limited, you can open one half for patch access without swinging a full 42-inch panel into a corridor or adjacent equipment. It is the practical choice for space-constrained deployments.

Q: Does the solid door affect rack ventilation?

A: Yes. Unlike vented or mesh doors, this solid steel door blocks passive front airflow. For racks housing high-heat active equipment (switches, UPS, servers), plan for rear or top exhaust ventilation or active cooling. Low-heat passive AV or cabling-only rack loads are generally not affected.

Q: Is the VWM-SSD-4216-BW RoHS compliant?

A: Yes. The door carries RoHS compliance (REACH), restricting hazardous substances in its materials. It also meets TSCA (Toxic Substances Control Act) requirements and includes a California Proposition 65 disclosure.

Q: What does the VWM-SSD-4216-BW weigh, and does that affect my wall-mount installation?

A: The door itself weighs 29.5 lbs (13.4 kg) and ships at 47 lbs. When added to a loaded VWM rack, wall anchors and the substrate (stud, masonry, or blocking) must be rated for the total combined load. Verify structural capacity before installation.

Eden Phillips

The VWM-SSD-4216-BW comes up frequently on projects where the architect or owner wants a clean wall-mount enclosure in a semi-public space — and the split door design is the detail that matters most. At 42 inches tall and 29.5 lbs of solid steel, this door is not a cosmetic afterthought. The split configuration means your integrators can open the top half to access patch panel rows without the bottom half swinging into a hallway during a live maintenance window — a real consideration in occupied buildings where rack access doesn't happen after hours.

Technical Highlights:

• Split Solid Steel Panel: Two independently opening halves on a 42U (106.7 cm) opening — lets technicians work the top section of the rack without fully opening the door into a constrained space. Non-negotiable for corridor-mounted IDF racks.
• 16-Inch Depth Match (40.6 cm): Fit is depth-specific. The 16-inch VWM rack variant and this door are paired components. A 12-inch depth VWM rack takes a different door — confirm rack depth on the purchase order before this ships.
• TAA and RoHS Verified: TAA compliance is pre-verified on this SKU, which clears the procurement gate on government, education, and public-sector projects without back-and-forth with the manufacturer. RoHS (REACH) satisfies environmental material documentation requirements simultaneously.

Deployment Considerations:

• The 47 lb shipping weight (29.5 lb door + packaging) is a field logistics note: two-person installation is practical, particularly when mounting the door onto a rack that is already wall-anchored and loaded with equipment above head height.
• The solid door eliminates passive front airflow entirely. If the rack will house any active switching, UPS, or compute hardware, verify that rear or top-panel exhaust ventilation is part of the rack spec before closing this door permanently — passive airflow through a vented front door is often the only cooling path in shallow wall-mount enclosures.

The VWM-SSD-4216-BW is the right call for 42U VWM wall-mount deployments in K-12 IDF closets, corporate lobby AV racks, or any installation where the integrator needs TAA-verified, solid-panel closure with split-access convenience — and where the rack's thermal load is low enough to live without front-panel airflow.