Vertiv VR3300-013 42U Server Rack Enclosure 600x1200mm
Overview
The Vertiv VR3300-013 is a 42U rack enclosure designed for dense data center and server room deployments where load capacity, physical depth, and long-term structural reliability are non-negotiable. Built to a 600mm wide by 1200mm deep footprint, this unit accommodates full-depth servers, network switches, storage arrays, and high-density cabling infrastructure without the corner-cutting that surfaces in cheaper rack solutions. At 78.7 inches tall, the VR3300-013 fills a standard raised-floor tile and integrates cleanly into hot-aisle/cold-aisle airflow containment schemes.
This rack is part of the Vertiv infrastructure catalog and is built to the same structural standards used in enterprise data centers worldwide. If you're specifying equipment for a new server room build-out or expanding existing rack density, the VR3300-013 belongs on your shortlist alongside a proper rack enclosure strategy review.
Key Features
- 3,000 lb Static Load Capacity: This is the figure that matters for stationary deployments. You can fully populate this rack with blade chassis, storage shelves, and patch panels without worrying about the frame yielding — 3,000 lb static gives you headroom even in the most aggressive equipment configurations.
- 2,500 lb Dynamic Load Capacity: Rated for 2,500 lb while being moved, which means you can roll a populated rack across a raised floor or through a data center aisle during reconfiguration without having to strip it down first. That alone saves hours on build-outs.
- 600mm Width: The 600mm wide form factor is the enterprise data center standard — it seats flush in standard floor tile grids and accepts all major vendor's 19-inch rail kits and toolless mounting systems without adaptation.
- 1200mm Depth: Deep-chassis servers (2U compute nodes, full-depth UPS units, SAN arrays) require 1000mm or more of usable depth. The 1200mm interior gives you room for equipment plus rear cable management — no forced compromise between equipment depth and cable radius.
- 42U Rack Space: 42U is the sweet spot for most enterprise deployments — enough vertical space for a fully populated compute + networking + power stack, while remaining manageable for a two-person install team. At 78.7 inches tall, it ships and installs without a ceiling height problem in standard server rooms.
- Steel Construction: Cold-rolled steel throughout — not aluminum extrusion or sheet metal hybrid. This matters for long-term rigidity in high-density deployments and for grounding continuity across the enclosure frame.
- RoHS and REACH Compliance: Verified environmental compliance with both RoHS and REACH directives, which is a procurement requirement for government, healthcare, and EU-destined infrastructure. No exemption documentation needed at intake.
- 302 lb Unit Weight: At 302 lb bare, this rack is substantial but within standard two-person lift guidelines for floor-level positioning. Factor this into your freight and receiving planning — a pallet jack or data center lift is appropriate for final placement.
Integration and Compatibility
The VR3300-013 is a passive structural enclosure, so compatibility is governed by physical dimensions rather than firmware or protocol. The 19-inch EIA-310 rail mounting standard is assumed, making this rack compatible with equipment from virtually every major vendor. For network switch and server integration, verify usable depth after rail kit installation — most enterprise vendors publish rail kit depth specs that should be checked against the 1200mm interior. For power infrastructure, the rack accepts standard PDU vertical mounting in the rear vertical channels, which is the expected configuration for a 1200mm-deep enclosure.
If you're pairing this rack with an active cooling solution or containment system, the 600x1200mm footprint fits standard hot-aisle containment panels from Vertiv and most third-party containment vendors. Consult your data center infrastructure planning documentation for precise panel sizing — containment panel widths are typically specified to rack width, and 600mm is a well-supported dimension across major containment product lines.
Frequently Asked Questions
Q: What is the maximum static load capacity of the VR3300-013?
A: The VR3300-013 is rated for 3,000 lb static load capacity — meaning fully populated and stationary in its installed position. Its dynamic (in-motion) load rating is 2,500 lb.
Q: What are the exact dimensions of the VR3300-013?
A: The rack measures 78.7 inches high x 23.6 inches wide x 47.2 inches deep (2000mm x 600mm x 1200mm). Unit weight is 302 lb.
Q: Is the VR3300-013 RoHS compliant?
A: Yes. The VR3300-013 carries both RoHS and REACH environmental compliance certifications, making it suitable for government, healthcare, and EU procurement requirements.
Q: How many rack units does the VR3300-013 provide?
A: The VR3300-013 is a 42U enclosure — sufficient to house a full compute, networking, and power stack for most enterprise deployments.
Q: Can the VR3300-013 be moved while populated with equipment?
A: Yes, within its 2,500 lb dynamic load rating. This means you can reposition a loaded rack across a data center floor without fully depopulating it, though a data center lift or pallet jack is recommended given the combined weight.
The spec I keep coming back to on the VR3300-013 is that 3,000 lb static rating paired with a 1200mm depth. Most integrators I work with are dealing with deep-chassis storage or full-depth compute nodes, and shaving depth to save floor space means fighting rear cable management the entire life of the installation. At 47.2 inches of depth, this rack doesn't force that compromise.
Technical Highlights:
- 3,000 lb Static / 2,500 lb Dynamic: The 500 lb differential between static and dynamic is a meaningful engineering margin — it means the frame isn't just rated for static load with a paper dynamic spec. Practical consequence: you can move a fully loaded rack without stripping it, which matters enormously during phased data center build-outs.
- Steel Construction at 302 lb: The bare rack weight of 302 lb is consistent with heavy-gauge cold-rolled steel throughout, not a hybrid chassis. This translates to better long-term rigidity under sustained high-density loading and reliable ground bonding across the frame.
- RoHS + REACH Dual Compliance: Both certifications are verified on this SKU. For government or healthcare procurement offices that gate on environmental compliance documentation, these are the two frameworks most commonly required — having both eliminates a common intake delay.
Deployment Considerations:
- At 302 lb bare and a shipping weight of 175 lb (the delta suggests partial assembly or packaging variation), confirm your receiving dock and floor path can handle the loaded weight before scheduling delivery. A data center lift is strongly recommended for final positioning.
- The 78.7-inch height clears most standard ceiling grids, but verify clearance in older facilities with suspended ceilings or overhead cable trays before specifying — 42U racks can be tight in sub-9-foot ceilings when accounting for leveling feet and cable management overhead.
This rack is the right call for high-density server room builds where load capacity and usable depth are design constraints — specifically healthcare data closets, colocation builds, and enterprise edge deployments running blade chassis or full-depth storage arrays in a 600mm-wide floor grid.
