TSC 257341-002 Cutter Module for TT2N Label Printer
Overview
The TSC 257341-002 is a dedicated cutter module designed to add automatic label cutting capability to the TSC TT2N thermal transfer label printer. If your TT2N is currently configured for tear-off label output and your operation needs cleanly cut individual labels — for print-and-apply lines, kitting stations, or on-demand label dispensing — this is the factory-matched upgrade path. Rather than retrofitting a third-party solution or running a separate cutter in-line, the 257341-002 integrates directly with the TT2N's native architecture, keeping your footprint compact and your label output consistent. For a full view of the TSC label printer add-ons lineup, the 257341-002 (sometimes searched as 257341 002) fits within TSC's Label Printer Add-Ons family alongside other TSC accessories and peripherals.
Key Features
- TT2N-Specific Fit: Engineered specifically for the TSC TT2N printer platform — not a universal cutter. This means the mechanical interface, firmware handshake, and label path geometry are matched to TT2N tolerances, which matters for cut registration accuracy on short labels.
- Automatic Cut Finishing: Adds auto-cut capability to a TT2N that ships in tear-off configuration, letting you dispense individual labels without operator intervention — a real throughput gain on high-volume print runs.
- Label Media Support: Designed to work with standard label stock as used in the TT2N. Confirm your media thickness and liner type against TT2N specifications before deploying on specialty or thick-stock labels.
- Compact Add-On Form Factor: At 1.06 lb gross weight, the module adds minimal mass to the printer assembly — important when the TT2N is shelf- or wall-bracket-mounted in tight workstation layouts.
- 2-Year Warranty: Covered under a 2-year manufacturer warranty, which aligns with the TT2N's own support lifecycle and simplifies service planning.
- Taiwan Manufacture: Produced in Taiwan under TSC's direct quality control — consistent with the TT2N printer itself.
Integration & Compatibility
The 257341-002 is built exclusively for the TSC TT2N label printer. It is not a universal cutter and should not be sourced as a cross-fit solution for other TSC models. If you are running a different TSC platform — such as a wider-format or higher-throughput model — confirm the correct cutter module part number with TSC before ordering. Installation requires the TT2N base unit; this module does not function as a standalone device. For print-and-apply automation, pair the TT2N with appropriate label printer accessories and verify that your host system or label software supports cutter command output (typically via ZPL or TSPL cutter commands).
Frequently Asked Questions
Q: Is the 257341-002 compatible with TSC printers other than the TT2N?
A: No. The 257341-002 is designed specifically for the TSC TT2N printer. It is not a universal cutter module and should not be installed on other TSC models without explicit confirmation from TSC.
Q: What is the warranty on the TSC 257341-002?
A: The 257341-002 carries a 2-year manufacturer warranty.
Q: Does the 257341-002 support both thermal transfer and direct thermal label media?
A: The module is listed for use with label media on the TT2N platform. The TT2N supports thermal transfer printing; confirm your specific media type against TT2N and cutter module specifications before deployment.
Q: Does installing the 257341-002 require any firmware update on the TT2N?
A: TSC documentation does not specify a firmware requirement in the available evidence. Contact TSC technical support to confirm whether a firmware revision is needed before installation.
Q: What is the weight of the 257341-002 cutter module?
A: The gross weight of the 257341-002 is 1.06 lb.
The TSC 257341-002 is a straightforward mechanical upgrade, but it's one where part-number precision matters more than almost anything else. This module is matched to the TT2N's specific label path geometry — get the wrong cutter module on a different TSC platform and you're dealing with misaligned cuts, media jams, and a service call that could have been avoided at the purchasing stage.
Technical Highlights:
- Platform-Specific Design: Built exclusively for the TT2N — the mechanical interface and cutter timing are calibrated to TT2N feed rates, which keeps cut registration tight even on short-pitch labels.
- 2-Year Warranty Coverage: The 2-year manufacturer warranty on the 257341-002 aligns with TT2N service lifecycle planning, so you're not managing mismatched support expiration dates between your printer and its cutter module.
- 1.06 lb Add-On Weight: Light enough that it won't shift the TT2N's center of gravity on shelf mounts or cause bracket stress in space-constrained workstations.
Deployment Considerations:
- Before ordering, verify the TT2N's current configuration — some TT2N units ship cutter-ready, others require mechanical preparation of the media exit path. Confirm with TSC whether your serial number range requires any additional hardware prep.
- If your label software sends cutter commands via TSPL or ZPL, test the command set against the TT2N firmware version in your environment — cutter activation timing can vary by firmware revision and label length setting.
The 257341-002 is the right call for TT2N deployments on kitting lines or print-and-apply stations where operator tear-off is a throughput bottleneck and individual label dispensing is the goal.
