Altronix T2MK78LVFM TROVE2M2 8-Door 10A 220V Access Control Power Supply
Overview
The Altronix T2MK78LVFM is a TROVE2M2 series centralized access control power solution rated at 10A across an 8-door configuration and designed to operate on 220V input. If you're commissioning a mid-to-large commercial access control deployment — hotel corridors, office buildings, parking structures, or multi-tenant facilities wired for 220V — this unit is built to consolidate power distribution and reduce the panel clutter that comes with powering each reader and lock individually. The T2MK78LVFM ships as a complete, UL-listed (ULX) power integration solution under Altronix's well-established TROVE2 platform.
The TROVE2 enclosure design keeps your access control hardware, power supply, and wiring in one managed space, which simplifies both initial commissioning and future service calls. An integrator can walk up to a single enclosure, trace every circuit, and make changes without hunting across a ceiling grid for distributed power bricks.
Key Features
- 8-Door Capacity: Powers up to 8 access-controlled doors from a single enclosure — consolidating power for locks, readers, and request-to-exit devices means fewer home-run runs to an MDF and a cleaner riser design on multi-floor projects.
- 10A Total Output: A 10-amp aggregate output budget gives you headroom to drive multiple electric strikes, mag locks, or electrified hardware simultaneously without tripping the supply under worst-case load scenarios (e.g., morning badge-in rush when most doors cycle within seconds of each other).
- 220V Input (ULX Rated): Designed for 220V input, making this the correct pick for international deployments or domestic facilities where 220V branch circuits are the building standard — avoiding the need for step-down transformers that add cost, heat, and a failure point.
- ULX Listing: The ULX certification means this unit has been evaluated to UL standards for power-limited and access control power supplies — a requirement on most commercial and government projects where the AHJ demands listed equipment at the panel level.
- TROVE2M2 Platform: The TROVE2 enclosure system is designed to integrate Altronix power hardware with third-party access control panels in a single backplane-mounted assembly. This reduces field-fabricated wiring, keeps the install serviceable, and satisfies inspectors who want to see organized, documented power distribution.
- Centralized Power Distribution: Rather than deploying individual power supplies per door — which multiplies battery backup complexity and creates distributed failure points — this unit centralizes distribution, making battery backup integration and load monitoring far simpler across all 8 doors.
Integration & Compatibility
The T2MK78LVFM is designed around Altronix's TROVE2 integration platform, which supports pairing with a wide range of access control panels from manufacturers including Lenel, Software House, Honeywell Pro-Watch, AMAG, and others that use standard power input requirements. Verify your panel's current draw per door and confirm total load stays within the 10A output budget before finalizing the door count. The 220V input requirement is a hard constraint — this unit is not field-convertible to 120V, so confirm your electrical rough-in before ordering. For access control power deployments on 120V circuits, Altronix offers alternate TROVE configurations in the same family. Review the broader Altronix catalog for companion enclosures, battery backup modules, and power distribution accessories that extend this platform. Integrators specifying access control power supplies for multi-door commercial projects should evaluate total lock current draw against this unit's 10A budget — magnetic locks typically draw 250–650mA each at 12VDC or 24VDC, so 8 doors of mag lock hardware is well within budget, but electrified panic hardware or high-power strikes should be load-calculated carefully. For a complete system, pair with a compatible access control panel and battery standby module sized for your required hold time under power outage conditions. Integrators building out larger campuses should also review PoE network switches for IP reader infrastructure alongside dedicated access power.
Frequently Asked Questions
Q: What is the input voltage for the T2MK78LVFM?
A: The T2MK78LVFM is rated for 220V input. It is not designed for 120V circuits. Confirm your facility's electrical branch circuits before specifying this unit.
Q: How many doors can the T2MK78LVFM support?
A: The T2MK78LVFM supports up to 8 doors, providing centralized power distribution for locks, readers, and associated access hardware across all 8 points.
Q: What is the total current output of the T2MK78LVFM?
A: The unit provides a 10A total output. Calculate your per-door lock and reader current draw and confirm the aggregate stays within this budget, particularly in installations with high-current electrified hardware.
Q: Is the T2MK78LVFM UL listed?
A: Yes. The T2MK78LVFM carries a ULX listing, which satisfies AHJ requirements on commercial and government projects that mandate listed power equipment at the panel level.
Q: Which access control panels are compatible with the T2MK78LVFM?
A: The TROVE2M2 platform is designed to integrate with a broad range of third-party access control panels. Confirm compatibility with your specific panel manufacturer's power input specifications before deployment.
Q: Does the T2MK78LVFM support battery backup?
A: The TROVE2 platform is designed to support battery backup integration. Consult Altronix's TROVE2 accessory lineup for compatible battery modules and size the battery for your required standby duration.
The T2MK78LVFM's 220V input is the first thing I check when this unit shows up on a submittal — it's a hard requirement that catches integrators off guard when a facility's electrical rough-in is 120V. Get that confirmed with the electrical contractor before the equipment ships; a 220V-input unit on a 120V branch circuit is a no-go, and swapping to an alternate Altronix TROVE configuration after rough-in is an avoidable project delay.
Technical Highlights:
- 10A Output Budget: At 10A total, you have comfortable headroom for 8 doors of mag lock hardware (typical mag lock draws 250–500mA at 12VDC), but electrified panic bars or high-current strikes can push 800mA–1A each — load-calc before you commit the full 8-door count to high-draw hardware.
- ULX Certification: UL listing on access control power is a non-negotiable on most commercial permits. The ULX mark on this unit means you're not going back to the drawing board when the AHJ reviews the submittal.
- TROVE2M2 Enclosure Platform: Centralizing power for all 8 doors in one TROVE2 enclosure cuts your service time dramatically — one location to trace circuits, one location for battery backup integration, and a clean presentation for any future panel upgrades.
Deployment Considerations:
- Confirm your access control panel's per-door current draw against the 10A aggregate before finalizing the design — it's easy to underestimate load when mixing mag locks, REX devices, and card readers on the same supply.
- The 220V input is not field-convertible. If the facility has mixed voltage circuits across floors, you may need to pair this unit with an alternate Altronix 120V TROVE configuration on different zones rather than forcing a single supply across incompatible branches.
The T2MK78LVFM is best suited for international facilities, commercial buildings wired to 220V standards, or domestic projects where the electrical design specifically calls for 220V access control branch circuits — multi-tenant office builds, hospital wings, and hotel properties with European electrical infrastructure are the scenarios where this unit earns its place on the submittal.
