Altronix T3SHK75F16DQ/PWX/KIT1 - T3SH75XK1DQ

Altronix T3SH75XK1DQ Concise Descriptor

Overview

The Altronix T3SH75XK1DQ is a 75W, 12VDC power distribution module designed to efficiently power multiple surveillance devices from a single source. This unit is ideal for centralized power management in installations requiring numerous cameras, sensors, or other low-voltage equipment, simplifying wiring and reducing potential points of failure. The T3SH75XK1DQ provides 16 individually fused outputs, allowing for granular control and protection of each connected device. This specific configuration is often deployed in network video recorder (NVR) racks or within main equipment cabinets to consolidate power distribution.

Compatibility

This power distribution module is compatible with any 12VDC power supply unit (PSU) capable of delivering at least 75W. It is commonly paired with Altronix power supplies such as the AL1024ULXM24, AL1024ULACM24, or similar 12VDC units. The fused outputs are suitable for powering a wide range of low-voltage surveillance equipment, including IP cameras, IR illuminators, access control readers, and network switches that operate within the 12VDC range and draw current within the limits of the individual fuses.

Installation Notes

Each of the 16 outputs on the T3SH75XK1DQ is protected by a user-replaceable fuse. The module requires a 12VDC input from a compatible power supply. Ensure the total current draw of all connected devices does not exceed the 75W capacity of the module or the output rating of the primary power supply. Fuse ratings should be selected based on the current requirements of each individual device, typically ranging from 0.5A to 3A. Proper ventilation should be maintained around the module and its associated power supply to prevent overheating.

What's in the Box

• 1x Altronix T3SH75XK1DQ 16-output 12VDC power distribution module
• 16x Fuses (pre-installed, typically 1A or 2A)
• 1x Installation manual