Altronix T2M7XK3D Power and Access Control System Kit

The Altronix T2M7XK3D is a pre-configured power and access control kit that consolidates the core components needed for a structured security installation into a single orderable unit. Rather than sourcing each piece individually, integrators receive the Trove2 enclosure, eFlow104NB power supply/charger, ACMS8CB current monitoring board, PDS8CB power distribution board, VR6 voltage regulator, TM2 transformer module, and RSB1 relay board together — reducing procurement steps and ensuring component compatibility out of the box. If you are evaluating Altronix power and access solutions, this kit represents a vetted assembly of complementary hardware from a single product line.

What This Kit Contains

The T2M7XK3D ships with seven matched components designed to work together in a single-enclosure power and access installation:

• Trove2 Enclosure (×1): The backbone housing for the entire assembly — Altronix's modular Trove2 chassis accommodates the power, distribution, and communication modules in one organized cabinet, reducing wiring clutter in the head-end closet.
• eFlow104NB Power Supply/Charger (×1): The power heart of the kit. The eFlow104NB is compatible with the LINQ2 network communication module (sold separately), enabling remote diagnostics — a real advantage when you are managing distributed sites and need to monitor power supply health without rolling a truck.
• ACMS8CB Current Monitoring Board (×1): Adds per-output current sensing to the installation. Knowing which output is drawing abnormal current helps localize faults before they cascade to the whole panel.
• PDS8CB Power Distribution Board (×1): Distributes power across up to eight outputs from within the enclosure, keeping individual circuit protection tidy and serviceable.
• VR6 Voltage Regulator (×1): Conditions output voltage for connected devices — relevant when your load mix includes readers or controllers with tighter input tolerances.
• TM2 Transformer Module (×1): Provides the AC-side transformer stage within the Trove2 chassis.
• RSB1 Relay Board (×1): Adds relay-switched outputs for door strike or auxiliary device control directly inside the enclosure.

Compatible Add-On Accessories

Altronix offers a documented set of access control power accessories that expand or adapt the T2M7XK3D installation. These are ordered separately:

• BR1 Add-On Mounting Bracket: Extends mounting flexibility when standard enclosure positioning does not align with your backboard layout.
• WM5 / WM25 / WM100 Magnetic Cable Tie Mounts: Keep wiring routed cleanly inside the enclosure — a small detail that matters during service calls when another technician needs to trace a circuit quickly.
• MM4 / MM8 / MM12 / MM24 Mounting Magnets: Available in packs of 4, 8, 12, or 24 for securing cable runs or sub-assemblies within the Trove2 chassis.
• Trove2BWC Battery/Wire Trough Enclosure: Adds battery and wire management capacity to the base Trove2 — necessary if your installation requires standby battery backup within the same cabinet.
• LINQ2 Network Communication Module: Connects the eFlow104NB to your network for remote monitoring, control, and diagnostics via Altronix's eFlow-compatible management interface. If remote site visibility is a project requirement, plan for LINQ2 during initial design — retrofitting network modules after closeout is avoidable rework. See access control infrastructure for related networking components.
• Circ1ATSE Automatic Transfer Switch: Provides high-voltage AC automatic transfer in a dedicated enclosure — relevant for installations requiring failover between two AC sources at the panel level. Review your power planning requirements before specifying this option.

Frequently Asked Questions

Q: What components are included in the T2M7XK3D kit?

A: The T2M7XK3D ships with one each of: Trove2 enclosure, TM2 transformer module, eFlow104NB power supply/charger, ACMS8CB current monitoring board, VR6 voltage regulator, PDS8CB power distribution board, and RSB1 relay board.

Q: Is the LINQ2 network communication module included in the T2M7XK3D?

A: No. The LINQ2 is a compatible add-on accessory ordered separately. It enables remote monitoring and diagnostics of the eFlow104NB power supply/charger included in this kit.

Q: Does the T2M7XK3D include battery backup capability?

A: Battery backup enclosure capacity can be added via the Trove2BWC Battery/Wire Trough Enclosure, which is a separately ordered accessory compatible with the Trove2 chassis included in this kit.

Q: What is the Circ1ATSE used for with the T2M7XK3D?

A: The Circ1ATSE is a high-voltage AC automatic transfer switch in its own enclosure. It is a compatible add-on accessory — not included — intended for installations requiring automatic failover between two AC power sources at the panel level.

Q: Can the T2M7XK3D enclosure accommodate additional mounting hardware?

A: Yes. The BR1 add-on mounting bracket, WM-series magnetic cable tie mounts, and MM-series mounting magnets (in packs of 4, 8, 12, or 24) are all documented compatible accessories for the Trove2 chassis in this kit.

Jerry Tildsen

The T2M7XK3D is the kind of kit that makes sense when you are commissioning a mid-size access control head-end and want the enclosure, power supply, distribution, relay, and current monitoring to arrive together on the same PO. The eFlow104NB at its center is the component worth noting — it is explicitly listed as compatible with the LINQ2 network module, which means this kit is designed with remote diagnostics in mind from the start, not as an afterthought.

Technical Highlights:

• eFlow104NB Power Supply/Charger: LINQ2-compatible design means you can add network-based remote monitoring of power supply diagnostics without replacing the core hardware — plan for LINQ2 in your BOM if the site is unattended or multi-location.
• ACMS8CB Current Monitoring: Per-output current sensing inside the same Trove2 chassis gives you fault isolation at the distribution level — valuable when eight outputs are driving a mix of readers, strikes, and auxiliary devices.
• Circ1ATSE Add-On: The automatic transfer switch option is a high-voltage AC device in its own enclosure — not a low-voltage afterthought. If dual-feed redundancy is in the spec, this is the correct Altronix path, but it must be ordered separately and planned for in the electrical rough-in.

Deployment Considerations:

• The Trove2BWC battery/wire trough is not included — if your installation calls for standby battery within the same cabinet, add it to the order before closeout. Retrofitting enclosure expansions after the panel is wired is avoidable rework.
• LINQ2 remote diagnostics require network connectivity at the panel location. Confirm a data drop is available during rough-in — this is frequently overlooked in equipment room planning for smaller sites.

The T2M7XK3D is a practical fit for commercial access control installs — multi-tenant office, school, or light industrial — where a single-enclosure power head-end with current monitoring and an upgrade path to remote diagnostics is the spec, and procurement simplicity on a multi-component panel matters.