Middle Atlantic STL Divider Clip 60000 - G6001DA

Middle Atlantic G6001DA STL Divider Clip 60000

Overview

The Middle Atlantic G6001DA is a steel divider clip designed for the Wiremold 6000 cable management system. This accessory clips into the 6000 series trays to subdivide cable runs, allowing you to separate different circuit groups, power feeds, or data lines within a single tray path. Steel construction ensures durability in high-traffic rack environments where frequent cable additions and modifications are expected.

Divider clips are most useful when you're managing mixed-voltage circuits (AC power separate from signal) or need to enforce physical separation between redundant paths. The G6001DA fits directly into the 6000 series profile without additional fasteners, making installation straightforward during initial build or retrofit scenarios.

Key Features

• Wiremold 6000 Compatibility: Engineered to clip into the 6000 series tray design — no adapters or drilling required. If you've already standardized on Wiremold 6000 across your racks, the G6001DA integrates without rework.
• Steel Material: Provides structural rigidity to prevent flexing under the weight of bundled cables. Unlike plastic dividers, steel won't degrade or sag when supporting 20+ lbs of conductors in a vertical run.
• Splittable Tray Function: Creates a discrete partition within the tray to enforce cable separation — critical when code or design standards require physical isolation between power and signal conductors, or between redundant A/B feeds.
• Space Efficiency: Allows you to use a single larger tray with internal subdivisions rather than running multiple parallel trays. Reduces overall footprint in crowded vertical cable paths while maintaining logical organization.
• ISO 9001 / ISO 14001 / ISO 45001 Certified Manufacturing: Product is manufactured under quality, environmental, and occupational health standards. Relevant if your facility audit trail requires traceability of all infrastructure components.
• TAA/889 Compliant: Meets U.S. Trade Agreements Act and Section 889 domestic sourcing requirements. Essential for federal, defense, or government-adjacent projects with Buy American procurement mandates.

Integration & Compatibility

The G6001DA is a direct-fit component for Wiremold 6000 cable trays. Verify your existing tray series before ordering — this clip is not compatible with the 4000 or 5000 series, nor with third-party tray systems. If you're mixing cable manager brands in the same rack, confirm the 6000 specification on your current inventory.

Typical deployments place divider clips at regular intervals (every 12–18 inches vertically) to maintain cable organization through multi-story vertical runs. In horizontal overhead drops, a single clip at the tray entry point is often sufficient unless the circuit count demands more granular separation.

What's in the Box

The G6001DA is sold as an individual divider clip. No additional hardware, fasteners, or installation tools are included — the clip integrates directly into the Wiremold 6000 tray profile.

Frequently Asked Questions

Q: Is the G6001DA compatible with Wiremold 5000 or 4000 series trays?

A: No. The G6001DA is designed specifically for the Wiremold 6000 series. The tray profile and clip interface differ between generations. Verify your tray model before purchase.

Q: How many divider clips do I need per vertical cable run?

A: This depends on circuit count and code requirements. Generally, place one clip every 12–18 inches vertically to prevent cable shifting and maintain separation. For a 10-foot vertical run with mixed voltage circuits, plan 6–8 clips.

Q: Can the G6001DA be used in horizontal overhead cable trays?

A: Yes. Horizontal trays benefit from divider clips at entry points and at intervals where tray direction changes or cable density is high. The steel construction prevents sagging under the weight of bundled cables in horizontal spans.

Q: Does the G6001DA require tools to install?

A: No. The clip slides into the 6000 series tray profile and seats with finger pressure. No fasteners, welding, or drilling is required. Installation time is under 30 seconds per clip.

Q: Is the G6001DA suitable for outdoor or wet environments?

A: The G6001DA is intended for indoor rack and cable tray applications. For outdoor or corrosive environments, consult Middle Atlantic's stainless-steel or powder-coated alternatives in the 6000 series accessory line.

Q: What is the weight rating of the G6001DA?

A: The clip supports typical cable bundle weights in vertical runs (15–25 lbs depending on conductor gauge and count). If you're bundling extremely heavy power feeds, contact pre-sales engineering for load-testing specifics.

Marty Allison

The Middle Atlantic G6001DA divider clip is a straightforward but often overlooked component that makes a real difference in cable tray organization, especially in larger installations where circuit separation is mandated. Steel construction is the critical detail here — it holds its shape under repeated cable additions over years without plastic fatigue or creep that can compromise isolation between power and signal runs.

Technical Highlights:

• Steel Material vs. Plastic Alternatives: Steel resists sagging and deformation under sustained 15–25 lb cable loads in vertical runs. Plastic clips will bow over time, reducing effective partition height and defeating the purpose of separation. The G6001DA maintains a rigid barrier across the tray's full depth.
• Wiremold 6000 Profile Fit: Direct integration into the 6000 series tray — no adapter clips, shims, or workarounds required. Installation is a 30-second clip-and-seat operation, not a fabrication job. That speed translates to labor cost savings if you're retrofitting an existing system.
• ISO 9001 / ISO 14001 / ISO 45001 Certification: Traceability and audit compliance for facilities that require documented manufacturing standards across all infrastructure components. TAA/889 compliance also covers federal and defense procurement mandates without exception.

Deployment Considerations:

• Verify Wiremold 6000 series before ordering — mixing tray generations in the same rack is common, and a 5000-series tray will not accept the G6001DA clip profile. Check your existing inventory or cable plan specification.
• In vertical runs longer than 6 feet, plan to use multiple clips (one every 12–18 inches) rather than relying on a single clip at top and bottom. Cable weight and thermal cycling can pull the midpoint of a long span, reducing separation effectiveness.

This clip is ideal for mixed-voltage infrastructure projects where code or design standards require physical isolation between 120V distribution and low-voltage signal (CAT6A, fiber, control circuits) in the same tray path. Without dividers, one stray cable can create both a safety hazard and a compliance headache during inspection.