Middle Atlantic STL Blank Ext. BOX Ivory - V5760

Middle Atlantic V5760 SAS Data Transfer Cable

Overview

The Middle Atlantic V5760 is a 7.28-inch SAS data transfer cable engineered for internal storage interconnects in Intel R1000GZ/GL and R2000GZ/GL server families. It features dual 36-pin SFF-8087 Mini-SAS connectors with a right-angled connector design, shipped as a 2-pack to support replacement inventory and deployment consistency across multiple systems. This is not a generic cable — it's purpose-built for controlled internal runs where cable slack must be minimized and connector fit is critical in space-constrained chassis.

Key Features

• Dual SFF-8087 Mini-SAS Connectors: Both ends use the 36-pin Mini-SAS standard, delivering direct SAS connectivity without adapter overhead. This eliminates a potential failure point in storage subsystems and ensures signal integrity on short, high-bandwidth runs inside the chassis.
• 7.28-inch Cable Length: Precisely measured for internal server chassis routing. Shorter cable runs reduce excess slack that can impede airflow or create pinch hazards during maintenance. In dense rack builds, every inch of managed cable matters to rack stability and mean-time-to-repair.
• Right-Angled Connector Design: Both connectors angle away from the mating port, improving fit where front or rear panel clearance is tight. This design choice eliminates the need for right-angle adapters, which themselves introduce connection points and potential signal degradation. If you've fought cable strain relief issues in tight chassis before, this geometry is worth noting.
• 2-Pack Quantity: Each V5760 order includes two cables. This supports service spare inventory, matched pair replacement during maintenance, and deployment consistency when provisioning multiple identical server instances. Data center teams typically maintain spares at a 1:3 to 1:5 ratio with active ports.
• Intel Platform Specificity: Qualified for R1000GZ/GL and R2000GZ/GL families. This specificity means you're not buying a generic cable that merely might work — you're deploying exactly what the platform design engineer specified. Mismatched cables introduce latency variance and compliance risk in storage-attached systems.
• Internal Interconnect Application: Designed for controlled runs inside the chassis, not cross-cabinet cabling. This distinction matters: internal SAS requires shielding optimized for shorter distances, while cross-cabinet runs demand different impedance characteristics. Using the right cable type for the right application reduces troubleshooting time when storage performance drops unexpectedly.

Integration & Compatibility

The V5760 connects directly to supported Intel server storage subsystems via SFF-8087 Mini-SAS ports. No adapters, no converters, no firmware version dependencies. If your infrastructure runs Intel R1000GZ or R2000GZ platforms with internal SAS storage, this cable maintains the exact signal path the platform architect designed. For non-Intel platforms or external SAS enclosures, consult your storage subsystem documentation — Mini-SAS is a standard connector, but cable impedance and connector orientation matter more than most engineers expect.

What's in the Box

2x SAS data transfer cables, 7.28 inches, SFF-8087 Mini-SAS connectors, right-angled design.

Frequently Asked Questions

Q: Is the V5760 compatible with my Intel R2000GL server?

A: Yes. The V5760 is explicitly qualified for Intel R1000GZ/GL and R2000GZ/GL server families. Confirm your exact model matches one of these before ordering.

Q: Can I use the V5760 for external SAS enclosure cabling?

A: The V5760 is designed for internal chassis interconnects. External SAS runs typically require different cable impedance and shielding. Check your enclosure documentation for the correct cable specification.

Q: Why is the cable only 7.28 inches long?

A: The short length is intentional for internal server chassis routing, where excess slack impedes airflow and complicates maintenance. If you need longer runs, you likely need a different cable type or cross-cabinet SAS solution.

Q: What does the right-angled connector design do?

A: The right-angle geometry improves fit in tight chassis where front or rear panel clearance is limited. It eliminates the need for additional right-angle adapters, reducing connection points and potential signal issues.

Q: Why buy a 2-pack instead of a single cable?

A: Data center maintenance typically requires spare inventory. A 2-pack supports immediate replacement during service calls and ensures matched cable pairs across multiple systems, reducing troubleshooting variables when storage connectivity issues arise.

James Everett

When you're managing Intel R1000GZ or R2000GL storage subsystems at scale, cable integrity directly impacts mean-time-between-failures. The Middle Atlantic V5760's 7.28-inch length and right-angled SFF-8087 connectors aren't arbitrary choices — they're the result of Intel's platform engineering. I've seen too many data center teams substitute generic cables to save $10 per unit, only to spend 40 hours troubleshooting latency spikes or intermittent SAS timeouts. The V5760 eliminates that risk.

Technical Highlights:

• Dual 36-pin SFF-8087 Mini-SAS connectors: Direct SAS interconnect without adapter overhead — every adapter introduces a connection point. On internal runs where cable length is under 10 inches, eliminating one passive component measurably improves signal stability and reduces future troubleshooting surface area.
• 7.28-inch length optimized for internal chassis routing: Excess slack in server chassis creates two problems: airflow obstruction (raising CPU/storage temps by 3–5°C) and pinch points during maintenance. The V5760's length is engineered to eliminate both without requiring custom fabrication or cable routing overhead.
• Right-angled connector geometry: In tight rear-panel environments, this design eliminates strain relief fighting and connector rocking that gradually degrades contact resistance. Over 18–24 months of thermal cycling, poor contact geometry can introduce intermittent CRC errors that VMS logs misattribute to drive failures.

Deployment Considerations:

• The V5760 is not a cross-cabinet SAS cable — it's internal-only. If you need external enclosure connectivity, confirm your enclosure spec before ordering. Wrong cable type in the wrong application is a silent failure mode.
• The 2-pack format is practical only if you manage multiple identical servers. If you're deploying a single R2000GL instance, one cable is waste; if you're deploying 10, the spare inventory pays for itself in faster MTTR on your first failure.

Deploy the V5760 in Intel R1000GZ/GL or R2000GZ/GL storage subsystems where internal SAS integrity is non-negotiable. If your infrastructure includes mixed platforms or generic cabling practices, this cable signals discipline — it's the right choice for teams that view infrastructure reliability as a cost, not a luxury.