Vertiv VP6N60A1 Outlet-Level Monitored 0U Vertical Rack PDU
Overview
The VP6N60A1 is a 0U vertical rack PDU from Vertiv's Geist line built for high-density data center and server room deployments drawing three-phase 208V Delta power at up to 60A (17.2kW). It provides both input-level and per-outlet power monitoring — meaning you can track load at the individual receptacle, not just at the PDU feed. That granularity matters when you're load-balancing across a half-populated cabinet or chasing a mystery overload. The unit carries 12 locking IEC C13 and 12 locking IEC C19 receptacles; the locking mechanism prevents accidental disconnections in vibration-prone or high-activity environments. Dual Ethernet ports support network redundancy so a cable pull doesn't blind your monitoring platform. The hot-swappable IMD (Intelligent Metering Device) lets you replace the monitoring module without powering down the PDU — a significant operational advantage in 24/7 facilities. A 128x128 LCD touchscreen with color-coded receptacles gives local visibility at the cabinet without a remote session. The TAA-compliant designation makes this eligible for U.S. federal and government-procurement environments.
Compatibility
The VP6N60A1 connects via a 3P+E IP67 plug rated for 60A three-phase 208V Delta feeds — confirm your in-rack whip or overhead busway terminates with a compatible 60A 3P+E connector before ordering. The 24 receptacles (C13 + C19) serve standard IEC-compatible server PSUs, storage array power inputs, and network gear. C19 outlets handle high-draw devices such as blade server chassis and high-density GPU nodes; C13 outlets suit standard 1U/2U servers and networking equipment. Integrates with DCIM and power management platforms via dual Ethernet — verify your Vertiv Geist monitoring software version supports outlet-level polling for this PDU family. Environmental sensor port supports optional temperature and humidity probes for in-cabinet monitoring. Standards compliance — UL & c-UL Listed 60950, FCC Part 15 Class A, RoHS — confirms suitability for North American commercial and light-industrial installations.
Installation Notes
The 0U vertical form factor mounts in the side channel of a standard EIA-310 rack, preserving all front-to-back U-space for equipment. Verify your rack cabinet has a 0U PDU mounting channel wide enough for the unit's vertical rail. The 3P+E IP67 input plug requires a matching 60A delta whip; if your facility runs wye-configured feeds, this PDU is not the correct selection — consult the Vertiv Geist catalog for wye-input variants. U-Lock receptacles require a deliberate quarter-turn to release, so factor that into cable management plans for high-density patching.
