QNAP 8GB Ecc DDR4 Ram 3200 MHZ Udimm T0 - RAM-8GDR4ECT0-UD-3200

QNAP RAM-8GDR4ECT0-UD-3200 8GB ECC DDR4 UDIMM Memory Module

Overview

The RAM-8GDR4ECT0-UD-3200 is an 8GB ECC DDR4 UDIMM running at 3200 MHz, designed to expand memory capacity in compatible QNAP NAS systems. ECC (Error-Correcting Code) memory detects and corrects single-bit memory errors on the fly — critical for NAS deployments running continuous read/write workloads, virtualization, or ZFS-based storage pools where silent data corruption is a real risk. This is a T0-version module intended for systems that expose UDIMM DDR4 slots with ECC support.

Compatibility

Verified compatible with QNAP NAS appliances that carry UDIMM DDR4 slots with ECC memory support. Confirmed platforms include the QNAP NAS lineup such as the TS-1655 (four UDIMM DDR4 slots, 8GB preinstalled, expandable to 128GB using 4x 32GB modules) and the TS-1273AU-RP (two UDIMM DDR4 slots, expandable to 64GB). Both models explicitly support ECC memory in their UDIMM slots. If you are specifying memory for a NAS or network storage appliance, verify your specific QNAP model's hardware spec page for UDIMM DDR4 ECC support and maximum capacity before ordering — not all QNAP systems accept ECC UDIMMs, and mixing ECC with non-ECC modules in a dual-slot config may disable ECC functionality depending on the platform. Consult the QNAP memory and storage accessories section for additional capacity options.

Installation Notes

Install into an open UDIMM DDR4 slot on a powered-down, grounded system. For dual-DIMM configurations on platforms like the TS-1273AU-RP, both slots must be populated to reach maximum capacity — single-slot operation is supported but limits total addressable memory. Confirm your NAS firmware is current before upgrading memory, as some QNAP platforms require a QTS update to recognize higher-capacity DIMMs correctly. Handle by the edges; avoid contact with gold contacts to prevent oxidation.