Middle Atlantic Plgmd SGL Crct 15IN. OC 5 - NM20GB515

Middle Atlantic NM20GB515 Nonmetallic Plugmold Multioutlet Strip

Overview

The Middle Atlantic NM20GB515 is a 5-foot nonmetallic Plugmold multioutlet strip designed for rack rooms, AV equipment bays, and commercial installations where predictable outlet placement and government procurement compliance both matter. At 15-inch receptacle spacing, it keeps transformer blocks and power bricks from crowding each other — a practical detail that matters once you're powering six to eight devices in a tight enclosure. The NM20GB515 ships in ivory and carries TAA compliance for federal, state, and education procurements that mandate Trade Agreements Act conformance.

Key Features

• 5 ft (1.5 m) Run Length: Covers a standard 19-inch rack bay with enough reach to route cleanly to a nearby power source without extension cords or cable strain.
• 15-inch Receptacle Spacing (38.1 cm): Wide enough to accommodate dual-plug power adapters side-by-side without blocking adjacent outlets — the common failure mode of tighter 6- or 8-inch strips in AV and security rack builds.
• TAA Compliant: Eligible for GSA Schedule, federal agency, and education procurement vehicles that require Trade Agreements Act conformance. No country-of-origin substitution risk on re-orders.
• Ivory Color: Matches standard ivory outlet and raceway finishes in commercial and institutional buildings, keeping surface-mount runs visually consistent with existing infrastructure.

Integration and Compatibility

The NM20GB515 is part of Middle Atlantic's Middle Atlantic power and raceway line, which spans raceway systems, rack power distribution units, and surge-protected strips. For structured power distribution in equipment racks, pair this strip with a dedicated rack-mount PDU when you need metered or switched outlet control — the NM20GB515 is a fixed-outlet surface strip, not a managed PDU. Review your rack power planning requirements before specifying: if your load requires circuit-level monitoring or remote switching, a managed PDU from the same Middle Atlantic rack power catalog is the correct path. For larger surface-mount runs, raceway and cord cover systems in the same product family offer longer lengths and higher outlet counts.

Frequently Asked Questions

Q: Is the NM20GB515 TAA compliant?

A: Yes. The NM20GB515 is TAA compliant, making it eligible for federal, state, and education procurement contracts that require Trade Agreements Act conformance.

Q: What is the receptacle spacing on the NM20GB515?

A: Receptacles are spaced 15 inches (38.1 cm) apart, which provides enough clearance for dual-plug adapters and large transformer blocks without blocking adjacent outlets.

Q: How long is the NM20GB515?

A: The strip measures 5 feet (1.5 m) in total length.

Q: What color is the NM20GB515?

A: Ivory. This matches standard commercial outlet and raceway finishes commonly found in institutional and commercial buildings.

Q: Is the NM20GB515 a managed PDU?

A: No. The NM20GB515 is a fixed-outlet nonmetallic multioutlet strip. It does not include metering, switching, or remote management. For managed power distribution, specify a rack-mount PDU from the Middle Atlantic line.

Jerry Tildsen

The NM20GB515 comes up in commercial AV and security rack builds where the integrator needs surface-mounted outlets with enough spacing to actually work — 15 inches between receptacles is the spec that separates this strip from the crowded consumer strips that end up with half the outlets blocked by adapter bricks. If you're populating a rack room or equipment closet where TAA compliance is a procurement requirement, this is the part that checks that box without a sourcing conversation.

Technical Highlights:

• 15-inch Receptacle Spacing: At 38.1 cm between outlets, you can run dual-plug wall warts on every other receptacle without a conflict — something 6- or 8-inch strips can't claim.
• 5-foot Run: The 1.5 m length is intentional for single-bay rack applications; long enough to reach the power source cleanly, short enough to avoid the slack management problem of an 8- or 10-foot strip in a compact enclosure.
• TAA Compliance: Directly relevant for government integrators — no country-of-origin substitution on TAA-required line items, and the compliance status is verified at the SKU level for NM20GB515.

Deployment Considerations:

• This is a nonmetallic surface strip, not a rack-mount PDU — install it on a wall, raceway, or flat surface within reach of the equipment it serves. It does not have rack ears or a 1U form factor.
• With only length, spacing, color, and TAA status documented in the published spec sheet, confirm amperage rating and circuit requirements directly with the manufacturer before specifying for high-draw loads.

Best fit for commercial AV closets, security equipment rooms, and government facility buildouts where TAA-compliant surface power distribution and wide outlet spacing are the deciding criteria.