Middle Atlantic Plgmd 5FT.2 CRT 12IN.OC - V20GBA512

Middle Atlantic V20GBA512 Steel Plugmold Multioutlet Strip

Overview

The Middle Atlantic V20GBA512 is a 5 ft (1.5 m) steel Plugmold multioutlet strip designed for structured rack and AV infrastructure environments where clean, distributed power matters. With receptacles spaced 12 in (30.5 cm) on center along its full 1.5 m length, this strip delivers four evenly distributed outlet positions that prevent power-brick conflict — a recurring problem when outlets are too tightly packed. The ivory finish suits open-ceiling and wall-surface raceways in commercial spaces where aesthetics are part of the spec. TAA compliance makes the V20GBA512 a viable procurement option for government contracts and federally funded projects requiring Trade Agreements Act sourcing.

Middle Atlantic Products has a long track record in rack infrastructure and cable management, and this Plugmold strip fits naturally into those Middle Atlantic power and infrastructure solutions. If you're speccing a power strip or PDU for a rack bay, AV equipment closet, or wall-mounted enclosure, understanding spacing and length up front saves you a field trip back for a different unit.

Key Features

• 5 ft (1.5 m) Total Length: Long enough to span a standard 19-inch rack bay side-to-side with routing margin, or to surface-mount along a short wall run without splicing. If your equipment closet is deeper than 5 ft and you need outlets at both ends, plan for two units or a longer variant.
• 12 in (30.5 cm) Receptacle Spacing: Outlets on 12-inch centers give each plug adequate clearance for standard wall-wart or transformer-style adapters — a detail that matters when you're wiring a rack with a mix of PoE injectors, small UPS bricks, and media converters. Tighter spacing strips force you to skip outlets or use right-angle adapters; this one doesn't.
• Ivory Color: Matches standard commercial ivory wall plates and conduit fittings, which matters in finished office, education, and healthcare spaces where a mismatched white or grey strip draws the wrong kind of attention from facilities managers.
• TAA Compliant: The V20GBA512 meets Trade Agreements Act requirements, which is a procurement prerequisite for U.S. federal agency projects, GSA schedule orders, and many state and local government contracts. If your bid spec requires TAA, this unit qualifies — confirm with your contracting officer for specific program requirements.
• Steel Construction (Plugmold Platform): The Legrand Plugmold platform uses steel channel construction rather than plastic, which provides a more rigid, impact-resistant raceway body — relevant in exposed installations where a plastic strip would flex or crack under cable weight or incidental contact.
• Surface-Mount Raceway Integration: Plugmold units install directly into Wiremold surface raceway systems, allowing the strip to run flush to the wall with wire management integrated — cleaner than a cord draped from a box outlet, and easier to route conduit to than a custom box installation.

Integration & Compatibility

The V20GBA512 is part of the Legrand/Middle Atlantic Plugmold GBA steel multioutlet family. It installs into standard Plugmold base channels and is compatible with Wiremold surface raceway systems. For enclosed rack deployments, verify that your enclosure's internal dimensions accommodate a 5 ft strip lengthwise — most 2-post and 4-post open frames will, but shallow wall-mount enclosures may require a shorter unit. This strip pairs naturally with rack enclosures and infrastructure cabinets where distributed power along a vertical or horizontal cable run is needed.

For broader power planning — including how to size PDUs, distribute branch circuits, and avoid common wiring errors in AV and security racks — review our power planning guide for AV and security infrastructure. If you're building out a surveillance head-end or access control rack, this strip can handle the auxiliary power runs that a dedicated rack power distribution unit doesn't reach.

Frequently Asked Questions

Q: Is the Middle Atlantic V20GBA512 TAA compliant?

A: Yes. The V20GBA512 is TAA (Trade Agreements Act) compliant, making it eligible for use on U.S. federal procurement contracts and GSA schedule orders that require TAA-sourced products. Confirm specific program eligibility with your contracting officer.

Q: What is the total length of the V20GBA512?

A: The V20GBA512 is 5 ft (1.5 m) in total length.

Q: How far apart are the outlets on the V20GBA512?

A: Receptacles are spaced 12 in (30.5 cm) on center, providing adequate clearance for standard transformer-style plugs and wall-wart adapters without skipping outlets.

Q: What color is the V20GBA512?

A: Ivory. This matches standard commercial-grade ivory wall plates and conduit fittings, suitable for finished office, education, or healthcare environments.

Q: What raceway system does the V20GBA512 integrate with?

A: The V20GBA512 is part of the Legrand Plugmold GBA steel multioutlet system and installs into standard Wiremold surface raceway channel, allowing flush wall-mount power distribution with integrated wire management.

Q: Is the V20GBA512 suitable for rack enclosure use?

A: It can be used inside rack environments provided the enclosure has sufficient internal depth to accommodate the 5 ft length. Verify your enclosure's interior dimensions before ordering — shallow wall-mount cabinets may require a shorter Plugmold variant.

Karl Wilson

The detail that most integrators overlook on the V20GBA512 is the 12-inch receptacle spacing — not just a comfort feature, but a practical necessity when you're running a mix of standard IEC plugs and transformer-style adapters in the same strip. At 12 in on center across a 5 ft run, you get four usable positions that don't force you into adapter gymnastics or blocked outlets.

Technical Highlights:

• 12 in (30.5 cm) Receptacle Spacing: Enough clearance for double-wide adapter plugs side by side without blocking adjacent positions — critical in a mixed-load rack with PoE injectors, KVM adapters, and small UPS units sharing the same strip.
• 5 ft (1.5 m) Length: Matches a standard rack bay run with margin to spare for entry/exit routing — no need to splice or extend for typical 19-inch rack or shallow wall-mount applications.
• TAA Compliance: Qualifies for federal and government-funded infrastructure projects without substitution — a procurement requirement that can gate an entire bid if you spec a non-compliant power strip.

Deployment Considerations:

• The ivory color is functional in finished commercial spaces but will stand out if your enclosure interior is grey or black — check your enclosure's color scheme before ordering if aesthetics matter for this installation.
• At exactly 5 ft, this strip won't fit lengthwise in shallow wall-mount enclosures with internal depths under 60 inches — measure your cabinet's usable interior run before committing to this length.

The V20GBA512 is the right call for government-funded AV infrastructure closets and security head-end rooms where TAA sourcing is a hard bid requirement and you need a steel-channel, surface-mount power strip that won't look out of place in a finished commercial space.