Pelco products
-
Pelco
SKU: POE130-ATUS
Pelco POE130-ATUS 130W PoE Power Supply
130W PoE injector for high-power PTZ cameras and heated housings
- 130W single Ethernet cable delivery powers PTZ cameras with heaters and IR
- NDAA Section 889 compliant for government and regulated deployments
- Indoor installation with ventilation; North American power cord included
$135.79 $134.99 Save $0.80 -
Pelco
SKU: SRXV-PLM
Pelco SRXV-PLM Pole Pipe Mount for Sarix Value Cameras
Universal pole mount for dome and bullet cameras, NDAA compliant
- Clamps securely to cylindrical poles, pipes, and posts without wall penetrations
- Single SKU accepts both dome and bullet form factors for mixed deployments
- No electronics or power required—mechanical installation on Sarix Value cameras
$136.90 $135.99 Save $0.91 -
Pelco
SKU: IRHPS120
Pelco IRHPS120 120Vac Power Supply for IR Camera Housing
120Vac to 24Vac power supply for IR camera housings, North American only
- 30W regulated 24Vac output powers heater, blower, illuminator, and camera
- 120Vac 50/60Hz input with NDAA Section 889 compliance for regulated deployments
- Indoor installation near camera location with 1-year manufacturer coverage
$131.13 $130.99 Save $0.14 -
Pelco
SKU: IRHPS230
Pelco IRHPS230 Power Supply 230Vac IR Housing
230 Vac power supply for Pelco IR housings in Europe and Asia-Pacific
- Converts 230 Vac 50/60 Hz to 24 Vac at 30 W for simultaneous IR, heat, blower
- Single integrated supply for Pelco IR camera housings with IP66 rated enclosure
- Sized for commercial surveillance in regions outside North America with 230 Vac standard
$131.13 $130.99 Save $0.14 -
Pelco
SKU: OHEPOWINJ
Pelco OHEPOWINJ Hi-PoE Injector for OHE Housing
Hi-PoE injector for Pelco OHE outdoor housings with heating/cooling
- Exceeds standard 30W PoE+ to support cameras with heaters, blowers, IR
- Single Ethernet cable carries both power and data to outdoor housing
- Indoor IT closet mount; NDAA Section 889 compliant for government use
$131.13 $93.99 Save $37.14 -
Pelco
SKU: SRXV2-PDCP-1001
Pelco SRXV2-PDCP-1001 Pendant Cap Adapter Outdoor
Pendant cap adapter for outdoor Sarix Value 2 dome cameras, IP66-rated
- Connects pendant arm, cap, and camera body with weather-sealed IP66 construction
- Compatible with Sarix Value 2 (SRXV2) dome cameras in outdoor pendant setups
- NDAA Section 889 compliant for government and secure facility deployments
$131.25 $130.99 Save $0.26 -
Pelco
SKU: ECM101
Pelco ECM101 Corner Mount Adapter Esprit PTZ
90-degree corner mount adapter for Pelco Esprit PTZ cameras
- Dual wall coverage with single camera at building corners
- Compatible with full pan/tilt range of Esprit Series heads
- NDAA Section 889 compliant for regulated installations
$123.21 $122.99 Save $0.22 -
Pelco
SKU: WLMT-1001
Pelco WLMT-1001 Wall Mount Bracket Large Pendant
Heavy-duty wall mount for large pendant cameras on concrete and steel
- Supports oversized dome assemblies and multi-sensor systems exceeding standard capacity
- Surface-mount installation on concrete, steel, and load-bearing surfaces without anchors
- Compatible with Pelco large pendant cameras and specialty imaging platforms
In stock · Ships same business day$127.39 $126.99 Save $0.40 -
Pelco
SKU: SRXV2-CRNMT-1001
Pelco SRXV2-CRNMT-1001 Corner Mount Bracket
90-degree corner mount for Pelco Sarix Value 2 dual-wall coverage
- Steel construction with IP66 weatherproof rating for outdoor deployment
- Single mount point covers two adjacent walls and corner area efficiently
- Designed for Sarix Value 2 cameras with corrosion-resistant finish
$126.00 $125.99 Save $0.01 -
Pelco
SKU: UEAP
Pelco UEAP ULISSE EVO 316L Stainless Pole Adapter
Marine-grade 316L stainless pole adapter for ULISSE EVO PTZ cameras
- AISI 316L stainless steel resists chloride and salt-spray corrosion
- Adjustable clamp fits multiple pole diameters for flexible mounting
- NDAA Section 889 compliant for government and regulated installations
$119.95 $118.99 Save $0.96 -
Pelco
SKU: OCTEXBA1/2P
Pelco OCTEXBA1/2P 1/2in NPT Armored Barrier Gland
1/2in NPT armored barrier gland for hazardous-area cable entry
- ATEX and IECEx certified for petrochemical and explosive atmospheres
- Mechanical armor protection with integrated electrical isolation barrier
- 1/2-inch NPT thread fits standard enclosure ports in hazardous locations
$128.91 $127.99 Save $0.92 -
Pelco
SKU: PTCCQ2B_FLIR
Pelco PTCCQ2B_FLIR Pole Mount FLIR Custom Color
Pole mount for PTCC Series cameras in FLIR custom color
- Cylindrical pole clamp with adjustable clamping range for secure mounting
- FLIR custom color finish matches thermal camera housings in dual-sensor setups
- NDAA Section 889 compliant for regulated security deployments
$126.50 $87.99 Save $38.51 -
Pelco
SKU: SRXV2-PDCP-1002
Pelco SRXV2-PDCP-1002 Pendant Cap Adapter Indoor
Pendant cap adapter for Sarix Value 2 indoor dome installations
- Connects pendant arm to camera mount for angled-pendant configurations
- IP66 rated for indoor use with NDAA Section 889 compliance
- Requires matching pendant arm and cap assembly for proper fit
$120.75 $119.99 Save $0.76 -
Pelco
SKU: OCTEXB1/2P
Pelco OCTEXB1/2P Barrier Gland ATEX IECEx
1/2-inch NPT barrier gland for Zone 1/2 hazardous area camera cable entry
- ATEX and IECEx dual certified for European and international compliance
- Isolates cable conductors to prevent ignition energy into classified zones
- NDAA Section 889 compliant for government and regulated sector deployments
$125.00 $124.99 Save $0.01 -
Pelco
SKU: DBHWGC
Pelco DBHWGC Pole Adapter 210-225mm
Pole adapter for 210–225mm diameter infrastructure mounting
- Secure clamp mount for Pelco camera housings on large utility poles
- Eliminates rotation and vibration on heavy-duty pole installations
- NDAA Section 889 compliant for government infrastructure deployments
$112.19 $111.99 Save $0.20 -
Pelco
SKU: SRXV2-PLMT-1001
Pelco SRXV2-PLMT-1001 Pole Mount Bracket
Pole mount bracket for Sarix Value 2 cameras in parking lots and utility poles
- Cylindrical pole clamp design fits standard poles with secure, adjustable installation
- NDAA Section 889 compliant for government and regulated surveillance deployments
- Outdoor-rated for parking areas, light standards, and perimeter zone monitoring
$115.50 $114.99 Save $0.51 -
Pelco
SKU: WFWCA
Pelco WFWCA Column Mount Ball Joint Camera Housing
Column clamp with ball joint for post-install camera aiming
- IP66 sealed housing resists rain, dust, and washdown spray
- Ball joint allows horizontal and vertical aim without unbolting
- Secures to poles and columns; eliminates wall anchors or brackets
$109.12 $108.99 Save $0.13 -
Pelco
SKU: OHEGBPS1B
Pelco OHEGBPS1B OHEG Housing Power Supply
Universal 100–240V power supply for Pelco OHEG outdoor housings
- 100–240 Vac input eliminates need for voltage converters in mixed installations
- Weatherproof outdoor-rated enclosure mounts directly at housing location
- NDAA Section 889 compliant for government and regulated deployments
$107.79 $106.99 Save $0.80 -
Pelco
SKU: OHEGBPS2B
Pelco OHEGBPS2B 230Vac Housing Power Supply
230Vac regulated power supply for Pelco OHEG outdoor housings
- 230 Vac input to 24 Vac output for heating, blower, and camera accessories
- Weatherproof enclosure rated for direct outdoor installation at housing location
- Eliminates need for remote electrical runs on 230 Vac infrastructure sites
$107.79 $106.99 Save $0.80 -
Pelco
SKU: WCWGC
Pelco WCWGC Corner Mount Adapter Large Housing
Heavy-duty 90-degree corner mount adapter for Pelco camera systems
- Converts flat-surface brackets to corner configuration for dual-wall coverage
- Large housing variant supports heavier camera assemblies and housings
- NDAA Section 889 compliant for government and secure deployments
$106.05 $105.99 Save $0.06







