Panduit FW2LU1U1ONM7.5 OM5 Fiber Optic Cable - FW2RLU1U1ONM7.5

Panduit FW2RLU1U1ONM7.5 OM5 LC Duplex Fiber Patch Cable

Overview

The Panduit FW2RLU1U1ONM7.5 is a QuickNet™ pre-terminated OM5 wideband multimode fiber patch cable built for structured cabling installations in data centers, telecom rooms, entrance facilities, and equipment distribution areas. The 2-fiber, 50/125µm OM5 construction supports wideband multimode transmission — meaning it is optimized for short-wave division multiplexing (SWDM) applications where you need to push higher aggregate bandwidth over existing multimode infrastructure without rerunning fiber. At 7.5 meters, it is sized for intra-rack and cross-patch runs where standard 1–3m cords fall short. The LC uniboot connector design consolidates both fibers into a single-boot assembly, cutting panel space roughly in half versus standard duplex LC — a real consideration in high-density patch environments where port real estate is tight. The Low Smoke Zero Halogen (LSZH) jacket limits toxic gas and smoke emission in the event of fire, satisfying plenum and riser requirements common in European data centers and increasingly specified in North American enterprise environments. Compliance with TIA-568.3-D, ISO/IEC 11801, and ANSI/TIA-942-B means FW2RLU1U1ONM7.5 drops into standard-compliant structured cabling plants without compatibility questions.

Compatibility

Designed for use with any LC duplex-compatible active equipment and patch panels in OM5 or backward-compatible OM3/OM4 multimode fiber plants. Works directly with Panduit QuickNet™ fiber patch panels and cassette modules accepting LC duplex ports. Compatible with 10GBase-SR, 25GBase-SR, 40GBase-SR4, and 100GBase-SR4 optical transceivers on standard OM5/OM4/OM3 multimode ports — no adapter required. The LC uniboot connector fits standard LC duplex ports on switches, routers, and fiber media converters from Cisco, Juniper, Arista, and similar vendors. For SWDM4 100G applications, OM5 is the correct fiber grade; OM3 or OM4 cords are not drop-in equivalents for wideband operation.

Installation Notes

The uniboot design uses a single-boot duplex LC connector — confirm your panel or transceiver cage accepts uniboot LC geometry before ordering, as some high-density cassettes require polarity-reversible uniboot variants. Verify polarity (Type A, B, or C) matches your plant's cabling scheme before installation. LSZH jacket is rated for use in spaces requiring limited-combustible materials; confirm local code requirements before substituting for riser-rated (OFNR) or plenum-rated (OFNP) cable in jurisdictions where those ratings are mandatory.