Vertiv 13463 8-Outlet 15A 120V Vertical Rackmount PDU
Overview
The Vertiv 13463 (model NSVKN080-101S15) is a basic, standard-tier rackmount power distribution unit designed for straightforward IT rack deployments where reliable outlet capacity and clean vertical form factor matter more than metered or switched intelligence. Rated at 15A, 120V, and 1.4kW, it ships with eight NEMA 5-15R receptacles on a 24-inch vertical chassis — the right fit for mixed-device racks where you need dependable power distribution without per-outlet monitoring overhead. Every unit is 100% factory-tested before shipment, and the Vertiv PowerIT rPDU line backs it with a five-year limited warranty. If you're sourcing for a data center, server closet, or integrated security equipment rack, this unit covers standard North American single-phase 15A circuits without complexity.
Key Features
- 8x NEMA 5-15R Receptacles, 2.0in Center-to-Center Spacing: Eight individually accessible outlets with 2.0-inch receptacle spacing means standard rack power bricks and IEC adapters seat without adjacent-port interference — a real time-saver during dense cable runs on rackmount PDU installations.
- 15A / 1.4kW Load Capacity at 120V: Matches the output of a standard 15A branch circuit (NEMA 5-15P plug included). Size your load budget at roughly 80% continuous — around 1.12kW — per NEC guidance, leaving headroom for startup current spikes from network switches or NVRs.
- 15A Thermal Breaker Over-Current Protection: Built-in thermal breaker trips on sustained overload without requiring a fuse replacement — reset manually after clearing the fault. Simpler field recovery compared to fuse-based units, which matters when the rack is in a remote IDF closet.
- 24in / 610mm Vertical Form Factor with Plastic Mounting Clips: The 1.61in x 1.61in cross-section mounts flush to the inside of a standard 600mm deep cabinet using the included top and bottom plastic clips, freeing rack units entirely for active equipment. Vertical PDU placement is the standard approach for maximizing 1U/2U device density in server and security cabinets.
- 10ft / 14-3 AWG Power Cord with NEMA 5-15P Plug: The 14-gauge wire handles the full 15A rated load without derating, and the 10ft cord reaches floor-mounted PDPs in most raised-floor data center rows or wall receptacles in telecom closets — longer than the 6ft cords shipped with some competing units.
- Single Power-ON Green LED Indicator: Confirms live input at a glance during rack commissioning. Minimal visual noise in high-density rows where LED clutter from monitoring units creates diagnostic confusion.
- TAA Compliant, Buy American Act COTS Compliant, RoHS Compliant, UL & c-UL Listed: TAA compliance satisfies federal procurement requirements without a waiver. UL/c-UL listing covers both US and Canadian installations — relevant if you're deploying racks across a multi-site North American footprint. RoHS compliance supports corporate sustainability reporting requirements. Consider a PoE power planning guide if you're pairing this PDU with PoE switch deployments in the same rack.
- Heavy Steel Chassis with Black Powder Coat Finish: Steel construction holds up to the torque stress of repeatedly seating and unseating IEC adapters — a real-world durability consideration in racks that get reconfigured regularly during tenant or system changes.
- Operating Temperature 10–45°C (50–113°F): Covers standard IT room and telecom closet conditions. Not rated for industrial or outdoor environments — plan accordingly for edge deployments with limited HVAC.
Integration & Compatibility
The 13463 is a non-metered, non-switched unit — there is no SNMP card slot, no network port, and no remote monitoring capability. This is a deliberate trade-off: no firmware to patch, no IP address to manage, no management interface to expose. For environments where DCIM integration or per-outlet switching is required, Vertiv's metered and switched rPDU families address those needs. The NEMA 5-15P input plug connects directly to any standard 15A wall or floor receptacle; no PDU tap or whip required. All eight receptacles are on a single 15A breaker — there is no breaker-segment isolation, so a single overcurrent event takes all eight outlets offline simultaneously. Factor this into your load distribution design if any of the connected devices are life-safety or always-on systems. Country of origin is USA, making this unit eligible for Buy American Act compliant procurements including federal agency and DOD infrastructure projects.
Frequently Asked Questions
Q: Is the Vertiv 13463 TAA compliant?
A: Yes. The 13463 is manufactured in the USA and is both TAA Compliant and Buy American Act COTS Compliant, making it eligible for U.S. federal government procurements.
Q: What is the warranty on the Vertiv 13463?
A: Vertiv covers the 13463 with a five-year limited warranty, which is the standard warranty for the PowerIT rPDU Basic line.
Q: Does the 13463 support remote monitoring or SNMP management?
A: No. The NSVKN080-101S15 is a basic, non-metered, non-switched PDU with no network port or management interface. It provides reliable passive power distribution only. For remote monitoring, Vertiv's metered or switched rPDU families would be required.
Q: How many outlets does the 13463 have, and what receptacle type?
A: The 13463 has eight NEMA 5-15R receptacles spaced 2.0 inches center-to-center, all fed from a single 15A input circuit via a NEMA 5-15P plug.
Q: What is the maximum load capacity of the Vertiv 13463?
A: The unit is rated at 15A, 120V, 1.4kW. Per standard NEC guidelines, plan for a continuous load of approximately 80% (around 1.12kW) to maintain safe operating margins.
Q: Will the 13463 fit inside a standard 600mm deep rack cabinet?
A: Yes. The 24-inch (610mm) vertical chassis mounts to the interior of a standard 600mm deep cabinet using the included top and bottom plastic mounting clips, consuming zero rack units.
The Vertiv 13463 (NSVKN080-101S15) is the unit I recommend when a customer asks for a clean, no-drama vertical PDU for a standard 15A circuit. The 14/3 AWG cord handles the full rated load without derating, the thermal breaker resets without a fuse swap, and the 2.0-inch receptacle spacing actually lets you seat wide power bricks side-by-side — details that matter when you're wiring eight devices in a hurry during a rack commissioning day.
Technical Highlights:
- Single 15A Thermal Breaker: Trips on sustained overload and resets manually — no fuse to carry in your kit. In a remote IDF closet, that's the difference between a 10-second recovery and waiting for a parts run.
- TAA + Buy American Act COTS Compliance: Manufactured in the USA, clearing the procurement gate for federal, DOD, and state/local government projects without an exception waiver. Not all basic PDUs hit this bar.
- 24in Vertical, Zero Rack Units: The 1.61in x 1.61in chassis clips to the cabinet interior, leaving every rack unit available for active gear. At 4 lbs shipped, it doesn't shift the cabinet's center of gravity on deep-cabinet roller installs.
Deployment Considerations:
- All eight outlets share a single 15A breaker — there is no segment isolation. If you're powering any always-on device (NVR, primary switch), put it on a separate circuit or a PDU with breaker segments to avoid a single overcurrent event taking down everything simultaneously.
- Operating temperature tops out at 45°C (113°F). Edge deployments in unconditioned spaces — outdoor telecom enclosures, industrial cabinet installs — will need a different unit rated for higher ambient temperatures.
For a standard 15A 120V branch circuit in a government or enterprise data closet where TAA compliance is a hard requirement and per-outlet monitoring isn't needed, the 13463 covers the brief without the cost or management overhead of a metered unit.
