Middle Atlantic 411-WH Non-Metallic 400 Series Flat 90° Elbow
Overview
The Middle Atlantic 411-WH is a flat 90-degree elbow fitting for the 400-series non-metallic raceway system, finished in white. Use the 411-WH wherever a cable run needs to change horizontal direction along a wall or baseboard — keeping conductors protected and the installation visually clean without bending conduit or leaving exposed slack. TAA compliance makes this fitting appropriate for government facilities and federally funded projects subject to the Trade Agreements Act.
Compatibility
Designed for the Middle Atlantic 400-series non-metallic raceway system. Pairs directly with 400-series straight sections, couplings, inside and outside corners, and end fittings within the same product family. Verify raceway series before ordering — Middle Atlantic offers multiple channel widths (300, 400, 500 series); the 411-WH is specific to the 400-series footprint and will not mate correctly with adjacent series without an adapter. White finish matches standard commercial wall color; coordinate with your cabling infrastructure finish selections if mixing raceway runs.
Installation Notes
Snap-fit assembly typical of non-metallic raceway fittings — no adhesive or fasteners required at the elbow joint itself, though the adjacent straight sections should be anchored per the raceway installation guidelines. Route low-voltage signal or power cables only; this is a non-metallic fitting and provides no EMI shielding. Confirm local code acceptance of non-metallic surface raceway for your application before specifying.
