ACTi CDS-NIO55-NIDS-S15 55-Inch Non-Interactive Display

Overview

The ACTi CDS-NIO55-NIDS-S15 is a 55-inch non-interactive display built for surveillance control room and security operations center (SOC) environments where you need high-visibility monitoring without touch-screen complexity. The model number CDS-NIO55-NIDS-S15 identifies this as a fixed, non-touch variant — suitable for wall-mounted or pedestal mounting in facilities running continuous multi-camera operations. Non-interactive operation eliminates software licensing overhead, touch-panel calibration drift, and firmware update burden on the display itself, making it a pure output device that pairs with external control systems. This is the right choice when your monitoring architecture already owns the UI layer elsewhere (a dedicated VMS workstation, control console, or networked operator terminal).

Compatibility

The CDS-NIO55-NIDS-S15 integrates with ACTi surveillance system deployments and third-party video management platforms using standard video input connectivity (HDMI, DVI, or composite video depending on input module configuration). It is compatible with any VMS or monitoring application that outputs video via these standard interfaces — Milestone Xprotect, AXIS Camera Station, Genetec, or custom integration systems. The 55-inch form factor accommodates both single high-resolution video streams and quad-split or multi-window layouts from external switchers or video distribution appliances. Confirm input port availability on your specific unit before ordering, as ACTi modular displays may ship with different connector options.

Installation Notes

Mount on a VESA-compatible wall bracket, flush-mount bezel system, or commercial display stand rated for the panel weight (approximately 50–60 lbs depending on final build). Ensure adequate ventilation around the perimeter — minimum 4 inches clearance on sides and back for thermal dissipation during 24/7 operation. Connect video source via shielded cables to minimize electromagnetic interference in high-density control rooms. The display operates on standard 100–240V AC mains power; use an uninterruptible power supply (UPS) or facility backup power if surveillance continuity is mission-critical. No calibration or software provisioning is required at installation — it functions immediately upon power-up and video signal receipt.

What's in the Box

• 1x ACTi CDS-NIO55-NIDS-S15 55-inch display panel
• 1x power cable
• 1x VESA wall-mounting bracket (confirm compatibility with your wall system)
• Installation documentation